Re: [Gems-users] Checkpoints creation problem

["Abdullah Kayi" <apokayi@xxxxxxxxx>]

To narrow down the potential mistake(s), can anybody kindly send his/her system.conf file that worked fine with naked-check-create.sh to me?
My host system settings are gcc 3.4.6,  x86_64 Linux  (ubuntu gutsy 7.10), simics 2.2.19, gem 2.1.

Thanks in advance,

Abdullah

On Sun, Mar 16, 2008 at 12:41 AM, Abdullah Kayi <apokayi@xxxxxxxxx> wrote:

I tried to debug the error by going to $(SIMICS_DIR)/home/sarek and tried to run the installation script directly from there with:

./simics -x sol10-cd-install-1.simics

I am getting the following errors when I tried to install Solaris10. I am not sure if this new set of errors would help to solve the problem.
I am actually not even sure what I am doing is viable in this situation. Any help is appreciated.

Checking out a license... done: academic license.
Looking for additional Simics modules in ./modules

  +----------------+    Copyright 1998-2005 by Virtutech, All Rights Reserved
  |   Virtutech    |    Version: simics-2.2.19
  |     Simics     |    Compiled: Tue Aug 16 20:23:17 CEST 2005
  +----------------+
    www.simics.com      "Virtutech" and "Simics" are trademarks of Virtutech AB

Type 'copyright' for details on copyright.
Type 'license' for details on warranty, copying, etc.
Type 'readme' for further information about this version.
Type 'help help' for info on the on-line documentation.

Using CD-ROM image file: /home/apokayi/Solaris/sol-10-u4-ga-sparc-v1.iso

setting media file-cd25B_2_6

[fc0_image error] Error creating /home/apokayi/checkpoint_files

/disk/platinum.disk: No such file or directory
[error] setting attribute files in fc0_image:
illegal value
Error while loading a configuration: Failed to initialize all objects
This has left the configuration system in an inconsistent state.
Restarting Simics is recommended.

Failed to initialize all objects

Failed loading the configuration in Simics. This is probably
due to some misconfiguration, or that some required file is
missing. Please check the above output for error messages

[platinum-common.simics:227] the command did not complete properly; interrupting script
[sol10-cd-install-1.simics:63] the command did not complete properly; interrupting scrip


Many thanks,

Abdullah