Re: [Gems-users] Checkpoints creation problem

["Derek Hower" <drh5@xxxxxxxxxxx>]

This is a problem with the original disk image that was created before
the Solaris install started.  Try to delete the disk image file and
rerun the scripts.  It should be located NAKED_CHECKPOINT_DIR/disk.

-Derek

On Sat, Mar 15, 2008 at 5:24 PM, Abdullah Kayi <apokayi@xxxxxxxxx> wrote:
> Yes I did. I even tried for Solaris Express and Solaris 9, no success. Do I
> need to change anything other than system.conf for this process? Has anybody
> seen these warnings and errors before? I would really appreciate the help, I
> got stuck at this level for a long time.
>
> Regards,
>
> Abdullah
>
>
>
>
>
> On Sat, Mar 15, 2008 at 10:26 AM, Dan Gibson <degibson@xxxxxxxx> wrote:
> >
> > Did you verify the MD5 sums of the downloaded ISOs? It sounds like perhaps
> there was a problem in the download....
> >
> > Regards,
> >
> > Dan
> >
> > Abdullah Kayi wrote:
> >
> >
> >
> > Hi all,
> >
> > I compiled Ruby and Opal successfully using gcc 3.4.6 on an x86_64 Linux
> machine. I am using gems2.1 and I used simics 3.0.31 in that process.
> However for the checkpoint creation as suggested earlier I tried to use
> simics 2.2.19.
> > But again I have problems with the checkpoint creation, here are the
> details of the error:
> >
> > I tried to install Solaris 10;
> >
> > OS_INSTALL_CD_1=/home/apokayi/Solaris_Images/sol-10-u4-ga-sparc-v1.iso
> > OS_INSTALL_CD_2=/home/apokayi/Solaris_Images/sol-10-u4-ga-sparc-v2.iso
> >
> > after i run ./naked-check-create.sh 16 65536 I am again getting some
> warnings and errors:
> >
> > I am pasting whatever I see on my konsole, I appreciate any comments on
> this.
> >
> > Using CD-ROM image file:
> /home/apokayi/Solaris_Images/sol-10-u4-ga-sparc-v1.iso
> > setting media file-cd25B_2_6
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > CRAFF warning: File was not closed cleanly; may be corrupted
> > exec: No such file or directory
> > ***  [text-console] Window output disabled
> > [qlc24B_2 info] Disk registering: Loop id: 0x3
> > [qlc24B_2 info] Disk registering: Loop id: 0xc
> > [qlc24B_2 info] Disk registering: Loop id: 0xd
> > [qlc24B_2 info] Disk registering: Loop id: 0xe
> > [qlc24B_2 info] Disk registering: Loop id: 0xf
> > [qlc24B_2 info] Disk registering: Loop id: 0x10
> > [qlc24B_2 info] Disk registering: Loop id: 0x11
> > [qlc24B_2 info] Disk registering: Loop id: 0x12
> > [qlc24B_2 info] Disk registering: Loop id: 0x13
> > [qlc24B_2 info] Disk registering: Loop id: 0x14
> > [qlc28B_2 info] Disk registering: Loop id: 0x3
> > [qlc24B_2 info] Disk registering: Loop id: 0x4
> > [qlc28B_2 info] Disk registering: Loop id: 0x4
> > [qlc28B_2 info] Disk registering: Loop id: 0x5
> > [qlc28B_2 info] Disk registering: Loop id: 0x6
> > [qlc28B_2 info] Disk registering: Loop id: 0x7
> > [qlc28B_2 info] Disk registering: Loop id: 0x8
> > [qlc24B_2 info] Disk registering: Loop id: 0x2
> > [qlc28B_2 info] Disk registering: Loop id: 0x9
> > [qlc28B_2 info] Disk registering: Loop id: 0xa
> > [qlc28B_2 info] Disk registering: Loop id: 0xb
> > [qlc28B_2 info] Disk registering: Loop id: 0xc
> > [qlc28B_2 info] Disk registering: Loop id: 0xd
> > [qlc24B_2 info] Disk registering: Loop id: 0x5
> > [qlc28B_2 info] Disk registering: Loop id: 0xe
> > [qlc28B_2 info] Disk registering: Loop id: 0xf
> > [qlc28B_2 info] Disk registering: Loop id: 0x10
> > [qlc28B_2 info] Disk registering: Loop id: 0x11
> > [qlc28B_2 info] Disk registering: Loop id: 0x12
> > [qlc28B_2 info] Disk registering: Loop id: 0x13
> > [qlc28B_2 info] Disk registering: Loop id: 0x14
> > [qlc28B_2 info] Disk registering: Loop id: 0x15
> > [qlc24B_2 info] Disk registering: Loop id: 0x6
> > [qlc24B_2 info] Disk registering: Loop id: 0x7
> > [qlc24B_2 info] Disk registering: Loop id: 0x8
> > [qlc24B_2 info] Disk registering: Loop id: 0x9
> > [qlc24B_2 info] Disk registering: Loop id: 0xa
> > [qlc24B_2 info] Disk registering: Loop id: 0xb
> > New VTOC written to disk:
> >
> >              Label : SIMDISK cyl 10938 alt 2 hd 19 sec 80
> >                RPM : 7200
> >     Data cylinders : 10938
> >      Alt cylinders : 2
> > Physical cylinders : 10940
> >              Heads : 19
> >  Sectors per Track : 80
> >
> >   Number of data blocks : 16625760
> >
> > Partition Table:
> > Number   Tag             Flag                 Start        End       Size
> >   2      5 (backup)      1 (unmountable)          0   16625759   16625760
> >
> > Capturing output to 'install-log.txt'
> > Image memory limited to 8 G
> > Start at : Sat Mar 15 01:31:31 2008
> > [system info] Disabling slave processors.
> > [system info] Enabling slave processors.
> > [qlc24B_2 info] Undocumented MAILBOX command: 0x5a
> > [qlc28B_2 info] Undocumented MAILBOX command: 0x5a
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [hme0 info] Dropping packet, not connected to network. (Will not warn
> again)
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc28B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> > [qlc24B_2 info] Note: Abort Command Received - Something probably went
> wrong
> >
> > Many thanks,
> >
> > Abdullah
> > ________________________________
>
> > _______________________________________________
> > Gems-users mailing list
> > Gems-users@xxxxxxxxxxx
> > https://lists.cs.wisc.edu/mailman/listinfo/gems-users
> > Use Google to search the GEMS Users mailing list by adding
> "site:https://lists.cs.wisc.edu/archive/gems-users/"; to your search.
> >
> >
> >
> > --
> > http://www.cs.wisc.edu/~gibson [esc]:wq!
> >
> >
> > _______________________________________________
> > Gems-users mailing list
> > Gems-users@xxxxxxxxxxx
> > https://lists.cs.wisc.edu/mailman/listinfo/gems-users
> > Use Google to search the GEMS Users mailing list by adding
> "site:https://lists.cs.wisc.edu/archive/gems-users/"; to your search.
> >
> >
> >
>
>
> _______________________________________________
>  Gems-users mailing list
>  Gems-users@xxxxxxxxxxx
>  https://lists.cs.wisc.edu/mailman/listinfo/gems-users
>  Use Google to search the GEMS Users mailing list by adding
> "site:https://lists.cs.wisc.edu/archive/gems-users/"; to your search.
>
>
>