Re: [Gems-users] Error during checkpoint creation

["Abdullah Kayi" <apokayi@xxxxxxxxx>]

Sorry for the confusion, when I got those initial errors I got also x86 image to test whether my sparc image is broken. And I guess I copied the error while I was trying x86 images.  But, after that I have been trying the Sparc versions.

Regards,

Abdullah

On Thu, Mar 6, 2008 at 12:37 PM, Dan Gibson <degibson@xxxxxxxx> wrote:

Oh, I was confused because your earlier post said:

Using CD-ROM image file:
/home/apokayi/Solaris_Images/sol-10-u4-ga-x86-v1-iso.zip
setting media file-cd25B_2_6

Regards,
Dan

Abdullah Kayi wrote:

> These are the ISO images that I am using ( Solaris10 SPARC versions) ;
>
> sol-10-u4-ga-sparc-v1-iso
> sol-10-u4-ga-sparc-v2-iso
>
> Regards,
>
> Abdullah
>
> On Thu, Mar 6, 2008 at 12:15 PM, Dan Gibson <degibson@xxxxxxxx

> <mailto:degibson@xxxxxxxx>> wrote:
>
>     It looks like you downloaded the x86 version of Solaris. Download the
>     SPARCv9 version and use that instead.
>
>     Regards,
>     Dan
>
>     Abdullah Kayi wrote:
>     > I am getting this error in a different pop-up console and it looks
>     > like it opens up a debugger.
>     >
>     > Boot path: /ssm@0,0/pci@19,700000/scsi@2/disk@0,0:a  Boot args: -rv
>     > ERROR: Illegal Instruction
>     > debugger entered.
>     > {0} ok
>     >
>     > In the main window, I have the following output and it just hangs
>     > there probably waiting for the debugger.
>     >
>     > [qlc24B_2 info] Disk registering: Loop id: 0x3
>     > [qlc24B_2 info] Disk registering: Loop id: 0xc
>     > [qlc24B_2 info] Disk registering: Loop id: 0xd
>     > [qlc24B_2 info] Disk registering: Loop id: 0xe
>     > [qlc24B_2 info] Disk registering: Loop id: 0xf
>     > [qlc24B_2 info] Disk registering: Loop id: 0x10
>     > [qlc24B_2 info] Disk registering: Loop id: 0x11
>     > [qlc24B_2 info] Disk registering: Loop id: 0x12
>     > [qlc24B_2 info] Disk registering: Loop id: 0x13
>     > [qlc24B_2 info] Disk registering: Loop id: 0x14
>     > [qlc28B_2 info] Disk registering: Loop id: 0x3
>     > [qlc24B_2 info] Disk registering: Loop id: 0x4
>     > [qlc28B_2 info] Disk registering: Loop id: 0x4
>     > [qlc28B_2 info] Disk registering: Loop id: 0x5
>     > [qlc28B_2 info] Disk registering: Loop id: 0x6
>     > [qlc28B_2 info] Disk registering: Loop id: 0x7
>     > [qlc28B_2 info] Disk registering: Loop id: 0x8
>     > [qlc24B_2 info] Disk registering: Loop id: 0x2
>     > [qlc28B_2 info] Disk registering: Loop id: 0x9
>     > [qlc28B_2 info] Disk registering: Loop id: 0xa
>     > [qlc28B_2 info] Disk registering: Loop id: 0xb
>     > [qlc28B_2 info] Disk registering: Loop id: 0xc
>     > [qlc28B_2 info] Disk registering: Loop id: 0xd
>     > [qlc24B_2 info] Disk registering: Loop id: 0x5
>     > [qlc28B_2 info] Disk registering: Loop id: 0xe
>     > [qlc28B_2 info] Disk registering: Loop id: 0xf
>     > [qlc28B_2 info] Disk registering: Loop id: 0x10
>     > [qlc28B_2 info] Disk registering: Loop id: 0x11
>     > [qlc28B_2 info] Disk registering: Loop id: 0x12
>     > [qlc28B_2 info] Disk registering: Loop id: 0x13
>     > [qlc28B_2 info] Disk registering: Loop id: 0x14
>     > [qlc28B_2 info] Disk registering: Loop id: 0x15
>     > [qlc24B_2 info] Disk registering: Loop id: 0x6
>     > [qlc24B_2 info] Disk registering: Loop id: 0x7
>     > [qlc24B_2 info] Disk registering: Loop id: 0x8
>     > [qlc24B_2 info] Disk registering: Loop id: 0x9
>     > [qlc24B_2 info] Disk registering: Loop id: 0xa
>     > [qlc24B_2 info] Disk registering: Loop id: 0xb
>     > CD-ROM 'simicsfs' created
>     > Inserting medium 'simicsfs' in CD-ROM drive
>     > [system info] Disabling slave processors.
>     >
>     >
>     >
>     >
>     > On Thu, Mar 6, 2008 at 11:24 AM, Derek Hower <drh5@xxxxxxxxxxx
>     <mailto:drh5@xxxxxxxxxxx>

>     > <mailto:drh5@xxxxxxxxxxx <mailto:drh5@xxxxxxxxxxx>>> wrote:
>     >
>     >     I've seen that happen a few times.  Just ignore it and see
>     if the
>     >     installation continues.
>     >
>     >     On Thu, Mar 6, 2008 at 8:12 AM, Abdullah Kayi
>     <apokayi@xxxxxxxxx <mailto:apokayi@xxxxxxxxx>

>     >     <mailto:apokayi@xxxxxxxxx <mailto:apokayi@xxxxxxxxx>>> wrote:
>     >     > Thanks, after I pass that error. At the same stage I am
>     getting the
>     >     > following error;
>     >     >
>     >     >  Boot path: /ssm@0,0/pci@19,700000/scsi@2/disk@0,0:a  Boot
>     args: -rv
>     >     > ERROR: Illegal Instruction
>     >     >
>     >     > Any ideas on this?
>     >     >
>     >     >  Many thanks,
>     >     >
>     >     > Abdullah
>     >     >
>     >     >
>     >     >
>     >     >
>     >     > On Tue, Mar 4, 2008 at 10:06 AM, Derek Hower
>     <drh5@xxxxxxxxxxx <mailto:drh5@xxxxxxxxxxx>

>     >     <mailto:drh5@xxxxxxxxxxx <mailto:drh5@xxxxxxxxxxx>>> wrote:
>     >     > > You need to unzip the ISO first, then point the scripts
>     to the
>     >     unzipped
>     >     > file.
>     >     > >
>     >     > > -Derek
>     >     > >
>     >     > >
>     >     > > On Mon, Mar 3, 2008 at 11:20 PM, Abdullah Kayi
>     >     <apokayi@xxxxxxxxx <mailto:apokayi@xxxxxxxxx>

>     <mailto:apokayi@xxxxxxxxx <mailto:apokayi@xxxxxxxxx>>> wrote:
>     >     > >
>     >     > >
>     >     > >
>     >     > > > Hi,
>     >     > > >
>     >     > > > I am trying to create the initial checkpoints required by
>     >     GEMS and I am
>     >     > > > using Simics 2.2.19 for this purpose. I followed the
>     >     guidelines in the
>     >     > wiki
>     >     > > > and I tried to install Solaris10 downloaded from Sun.
>     >     > > > After  I do ./naked-check-create.sh 16 65536, I am getting
>     >     the following
>     >     > > > error.
>     >     > > >
>     >     > > > Using CD-ROM image file:
>     >     > > > /home/apokayi/Solaris_Images/sol-10-u4-ga-x86-v1-iso.zip
>     >     > > > setting media file-cd25B_2_6
>     >     > > > [error] setting attribute file in file_cd25B_2_6:
>     >     > > > illegal value: File does not appear to be an ISO image
>     >     > > >
>     >     > > > I double checked the ISO image inside this zip file, it
>     >     seems to be ok.
>     >     > Any
>     >     > > > ideas on this issue?
>     >     > > >
>     >     > > > Many thanks,
>     >     > > >
>     >     > > > Abdullah
>     >     > > >
>     >     > >
>     >     > >
>     >     > >
>     >     > > > _______________________________________________
>     >     > > >  Gems-users mailing list
>     >     > > >  Gems-users@xxxxxxxxxxx

>     <mailto:Gems-users@xxxxxxxxxxx> <mailto:Gems-users@xxxxxxxxxxx

>     <mailto:Gems-users@xxxxxxxxxxx>>
>     >     > > >  https://lists.cs.wisc.edu/mailman/listinfo/gems-users
>     >     > > >  Use Google to search the GEMS Users mailing list by
>     adding
>     >     > > > "site:https://lists.cs.wisc.edu/archive/gems-users/"
>     to your
>     >     search.
>     >     > > >
>     >     > > >
>     >     > > >
>     >     > > _______________________________________________
>     >     > > Gems-users mailing list
>     >     > > Gems-users@xxxxxxxxxxx <mailto:Gems-users@xxxxxxxxxxx>

>     <mailto:Gems-users@xxxxxxxxxxx <mailto:Gems-users@xxxxxxxxxxx>>

>     >     > > https://lists.cs.wisc.edu/mailman/listinfo/gems-users
>     >     > > Use Google to search the GEMS Users mailing list by adding
>     >     > "site:https://lists.cs.wisc.edu/archive/gems-users/" to
>     your search.
>     >     > >
>     >     > >
>     >     >
>     >     >
>     >     > _______________________________________________
>     >     >  Gems-users mailing list
>     >     >  Gems-users@xxxxxxxxxxx <mailto:Gems-users@xxxxxxxxxxx>

>     <mailto:Gems-users@xxxxxxxxxxx <mailto:Gems-users@xxxxxxxxxxx>>

>     >     >  https://lists.cs.wisc.edu/mailman/listinfo/gems-users
>     >     >  Use Google to search the GEMS Users mailing list by adding
>     >     > "site:https://lists.cs.wisc.edu/archive/gems-users/" to
>     your search.
>     >     >
>     >     >
>     >     >
>     >     _______________________________________________
>     >     Gems-users mailing list
>     >     Gems-users@xxxxxxxxxxx <mailto:Gems-users@xxxxxxxxxxx>

>     <mailto:Gems-users@xxxxxxxxxxx <mailto:Gems-users@xxxxxxxxxxx>>

>     >     https://lists.cs.wisc.edu/mailman/listinfo/gems-users
>     >     Use Google to search the GEMS Users mailing list by adding
>     >     "site:https://lists.cs.wisc.edu/archive/gems-users/" to your
>     search.
>     >
>     >
>     >
>     ------------------------------------------------------------------------
>     >
>     > _______________________________________________
>     > Gems-users mailing list
>     > Gems-users@xxxxxxxxxxx <mailto:Gems-users@xxxxxxxxxxx>
>     > https://lists.cs.wisc.edu/mailman/listinfo/gems-users
>     > Use Google to search the GEMS Users mailing list by adding
>     "site:https://lists.cs.wisc.edu/archive/gems-users/" to your search.
>     >
>     >
>

>     --
>     http://www.cs.wisc.edu/~gibson <http://www.cs.wisc.edu/%7Egibson>

>     [esc]:wq!
>
>     _______________________________________________
>     Gems-users mailing list
>     Gems-users@xxxxxxxxxxx <mailto:Gems-users@xxxxxxxxxxx>
>     https://lists.cs.wisc.edu/mailman/listinfo/gems-users
>     Use Google to search the GEMS Users mailing list by adding
>     "site:https://lists.cs.wisc.edu/archive/gems-users/" to your search.
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Gems-users mailing list
> Gems-users@xxxxxxxxxxx
> https://lists.cs.wisc.edu/mailman/listinfo/gems-users
> Use Google to search the GEMS Users mailing list by adding "site:https://lists.cs.wisc.edu/archive/gems-users/" to your search.
>
>

--
http://www.cs.wisc.edu/~gibson [esc]:wq!

_______________________________________________
Gems-users mailing list
Gems-users@xxxxxxxxxxx
https://lists.cs.wisc.edu/mailman/listinfo/gems-users
Use Google to search the GEMS Users mailing list by adding "site:https://lists.cs.wisc.edu/archive/gems-users/" to your search.