Re: [Gems-users] Error during checkpoint creation

["Abdullah Kayi" <apokayi@xxxxxxxxx>]

These are the ISO images that I am using ( Solaris10 SPARC versions) ;

sol-10-u4-ga-sparc-v1-iso
sol-10-u4-ga-sparc-v2-iso

Regards,

Abdullah

On Thu, Mar 6, 2008 at 12:15 PM, Dan Gibson <degibson@xxxxxxxx> wrote:

It looks like you downloaded the x86 version of Solaris. Download the
SPARCv9 version and use that instead.

Regards,
Dan

Abdullah Kayi wrote:
> I am getting this error in a different pop-up console and it looks
> like it opens up a debugger.
>
> Boot path: /ssm@0,0/pci@19,700000/scsi@2/disk@0,0:a  Boot args: -rv
> ERROR: Illegal Instruction
> debugger entered.
> {0} ok
>
> In the main window, I have the following output and it just hangs
> there probably waiting for the debugger.
>
> [qlc24B_2 info] Disk registering: Loop id: 0x3
> [qlc24B_2 info] Disk registering: Loop id: 0xc
> [qlc24B_2 info] Disk registering: Loop id: 0xd
> [qlc24B_2 info] Disk registering: Loop id: 0xe
> [qlc24B_2 info] Disk registering: Loop id: 0xf
> [qlc24B_2 info] Disk registering: Loop id: 0x10
> [qlc24B_2 info] Disk registering: Loop id: 0x11
> [qlc24B_2 info] Disk registering: Loop id: 0x12
> [qlc24B_2 info] Disk registering: Loop id: 0x13
> [qlc24B_2 info] Disk registering: Loop id: 0x14
> [qlc28B_2 info] Disk registering: Loop id: 0x3
> [qlc24B_2 info] Disk registering: Loop id: 0x4
> [qlc28B_2 info] Disk registering: Loop id: 0x4
> [qlc28B_2 info] Disk registering: Loop id: 0x5
> [qlc28B_2 info] Disk registering: Loop id: 0x6
> [qlc28B_2 info] Disk registering: Loop id: 0x7
> [qlc28B_2 info] Disk registering: Loop id: 0x8
> [qlc24B_2 info] Disk registering: Loop id: 0x2
> [qlc28B_2 info] Disk registering: Loop id: 0x9
> [qlc28B_2 info] Disk registering: Loop id: 0xa
> [qlc28B_2 info] Disk registering: Loop id: 0xb
> [qlc28B_2 info] Disk registering: Loop id: 0xc
> [qlc28B_2 info] Disk registering: Loop id: 0xd
> [qlc24B_2 info] Disk registering: Loop id: 0x5
> [qlc28B_2 info] Disk registering: Loop id: 0xe
> [qlc28B_2 info] Disk registering: Loop id: 0xf
> [qlc28B_2 info] Disk registering: Loop id: 0x10
> [qlc28B_2 info] Disk registering: Loop id: 0x11
> [qlc28B_2 info] Disk registering: Loop id: 0x12
> [qlc28B_2 info] Disk registering: Loop id: 0x13
> [qlc28B_2 info] Disk registering: Loop id: 0x14
> [qlc28B_2 info] Disk registering: Loop id: 0x15
> [qlc24B_2 info] Disk registering: Loop id: 0x6
> [qlc24B_2 info] Disk registering: Loop id: 0x7
> [qlc24B_2 info] Disk registering: Loop id: 0x8
> [qlc24B_2 info] Disk registering: Loop id: 0x9
> [qlc24B_2 info] Disk registering: Loop id: 0xa
> [qlc24B_2 info] Disk registering: Loop id: 0xb
> CD-ROM 'simicsfs' created
> Inserting medium 'simicsfs' in CD-ROM drive
> [system info] Disabling slave processors.
>
>
>
>
> On Thu, Mar 6, 2008 at 11:24 AM, Derek Hower <drh5@xxxxxxxxxxx

> <mailto:drh5@xxxxxxxxxxx>> wrote:
>
>     I've seen that happen a few times.  Just ignore it and see if the
>     installation continues.
>
>     On Thu, Mar 6, 2008 at 8:12 AM, Abdullah Kayi <apokayi@xxxxxxxxx

>     <mailto:apokayi@xxxxxxxxx>> wrote:
>     > Thanks, after I pass that error. At the same stage I am getting the
>     > following error;
>     >
>     >  Boot path: /ssm@0,0/pci@19,700000/scsi@2/disk@0,0:a  Boot args: -rv
>     > ERROR: Illegal Instruction
>     >
>     > Any ideas on this?
>     >
>     >  Many thanks,
>     >
>     > Abdullah
>     >
>     >
>     >
>     >
>     > On Tue, Mar 4, 2008 at 10:06 AM, Derek Hower <drh5@xxxxxxxxxxx

>     <mailto:drh5@xxxxxxxxxxx>> wrote:
>     > > You need to unzip the ISO first, then point the scripts to the
>     unzipped
>     > file.
>     > >
>     > > -Derek
>     > >
>     > >
>     > > On Mon, Mar 3, 2008 at 11:20 PM, Abdullah Kayi

>     <apokayi@xxxxxxxxx <mailto:apokayi@xxxxxxxxx>> wrote:
>     > >
>     > >
>     > >
>     > > > Hi,
>     > > >
>     > > > I am trying to create the initial checkpoints required by
>     GEMS and I am
>     > > > using Simics 2.2.19 for this purpose. I followed the
>     guidelines in the
>     > wiki
>     > > > and I tried to install Solaris10 downloaded from Sun.
>     > > > After  I do ./naked-check-create.sh 16 65536, I am getting
>     the following
>     > > > error.
>     > > >
>     > > > Using CD-ROM image file:
>     > > > /home/apokayi/Solaris_Images/sol-10-u4-ga-x86-v1-iso.zip
>     > > > setting media file-cd25B_2_6
>     > > > [error] setting attribute file in file_cd25B_2_6:
>     > > > illegal value: File does not appear to be an ISO image
>     > > >
>     > > > I double checked the ISO image inside this zip file, it
>     seems to be ok.
>     > Any
>     > > > ideas on this issue?
>     > > >
>     > > > Many thanks,
>     > > >
>     > > > Abdullah
>     > > >
>     > >
>     > >
>     > >
>     > > > _______________________________________________
>     > > >  Gems-users mailing list

>     > > >  Gems-users@xxxxxxxxxxx <mailto:Gems-users@xxxxxxxxxxx>

>     > > >  https://lists.cs.wisc.edu/mailman/listinfo/gems-users
>     > > >  Use Google to search the GEMS Users mailing list by adding
>     > > > "site:https://lists.cs.wisc.edu/archive/gems-users/" to your
>     search.
>     > > >
>     > > >
>     > > >
>     > > _______________________________________________
>     > > Gems-users mailing list

>     > > Gems-users@xxxxxxxxxxx <mailto:Gems-users@xxxxxxxxxxx>

>     > > https://lists.cs.wisc.edu/mailman/listinfo/gems-users
>     > > Use Google to search the GEMS Users mailing list by adding
>     > "site:https://lists.cs.wisc.edu/archive/gems-users/" to your search.
>     > >
>     > >
>     >
>     >
>     > _______________________________________________
>     >  Gems-users mailing list

>     >  Gems-users@xxxxxxxxxxx <mailto:Gems-users@xxxxxxxxxxx>

>     >  https://lists.cs.wisc.edu/mailman/listinfo/gems-users
>     >  Use Google to search the GEMS Users mailing list by adding
>     > "site:https://lists.cs.wisc.edu/archive/gems-users/" to your search.
>     >
>     >
>     >
>     _______________________________________________
>     Gems-users mailing list

>     Gems-users@xxxxxxxxxxx <mailto:Gems-users@xxxxxxxxxxx>

>     https://lists.cs.wisc.edu/mailman/listinfo/gems-users
>     Use Google to search the GEMS Users mailing list by adding
>     "site:https://lists.cs.wisc.edu/archive/gems-users/" to your search.
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Gems-users mailing list
> Gems-users@xxxxxxxxxxx
> https://lists.cs.wisc.edu/mailman/listinfo/gems-users
> Use Google to search the GEMS Users mailing list by adding "site:https://lists.cs.wisc.edu/archive/gems-users/" to your search.
>
>

--
http://www.cs.wisc.edu/~gibson [esc]:wq!

_______________________________________________
Gems-users mailing list
Gems-users@xxxxxxxxxxx
https://lists.cs.wisc.edu/mailman/listinfo/gems-users
Use Google to search the GEMS Users mailing list by adding "site:https://lists.cs.wisc.edu/archive/gems-users/" to your search.