Didn’t work either…
It still only starts jobs in wrk03 has you can see from condor_status
[root@srv-sub01 ~]# condor_status
Name OpSys Arch State Activity LoadAv Mem ActvtyTime
slot1@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Unclaimed Idle 0.000 1031967112+02:41:53
slot1@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Unclaimed Idle 0.000 193385114+04:00:43
slot1@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Unclaimed Idle 0.000 131945114+04:05:09
slot1_1@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Claimed Busy 0.000 32768 2+06:59:04
slot1_2@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Claimed Busy 0.000 4096 2+05:48:02
slot1_3@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Claimed Busy 0.000 4096 1+07:08:47
slot1_4@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Claimed Busy 0.000 4096 1+02:30:42
slot1_5@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Claimed Busy 0.000 4096 0+06:38:09
slot1_6@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Claimed Busy 0.000 4096 0+01:13:57
slot1_7@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Claimed Busy 0.000 4096 0+00:00:03
slot1_8@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Claimed Busy 0.000 4096 0+00:00:03
slot1@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Unclaimed Idle 0.000 515937117+02:51:10
slot1@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Unclaimed Idle 0.000 515953117+02:34:03
slot1@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Unclaimed Idle 0.000 515953112+02:43:40
slot1@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Unclaimed Idle 0.000 515953117+03:00:16
slot1@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Unclaimed Idle 0.000 128617112+02:42:23
slot1@xxxxxxxxxxxxxxxxxxxxxxxx LINUX X86_64 Unclaimed Idle 0.000 1031959112+02:47:07
Machines Owner Claimed Unclaimed Matched Preempting Drain
X86_64/LINUX 17 0 8 9 0 0 0
Total 17 0 8 9 0 0 0
[root@srv-sub01 ~]#
Best regards,
Guilherme de Sousa Aranha
From: HTCondor-users <htcondor-users-bounces@xxxxxxxxxxx>
On Behalf Of John M Knoeller
Sent: 24 de março de 2021 17:03
To: HTCondor-Users Mail List <htcondor-users@xxxxxxxxxxx>
Subject: Re: [HTCondor-users] How to distribute jobs round robin
When using partitionable slots, The Schedd can start more than one job on a single partitionable slot for each match that it gets from the negotiator.
This leads to something that appears to be depth-first matching.
CLAIM_PARTITIONABLE_LEFTOVERSE = false
In the Schedd, then it will start only one job for each match it gets from the negotiator, and then your negotiator matching policy will have more traction.
The downside of this is that it will take many more negotiation cycles for a Schedd to fill up a partitionable slot. And if your machines are going to end up completely full
anyway, this is wasted effort.
Hi Michael,
Thanks for the quick reply!
Unfortunately it didn't work.. the jobs are still being scheduled to a single machine until full.
I also checked the docs now for NEGOTIATOR_DEPTH_FIRST and the default is false but I set it explicitly anyway.
Best regards,
Guilherme de Sousa Aranha
-----Original Message-----
From: HTCondor-users <htcondor-users-bounces@xxxxxxxxxxx> On Behalf Of Michael Pelletier via HTCondor-users
Sent: 24 de março de 2021 13:26
To: HTCondor-Users Mail List <htcondor-users@xxxxxxxxxxx>
Cc: Michael Pelletier <michael.v.pelletier@xxxxxxxxxxxx>
Subject: Re: [HTCondor-users] How to distribute jobs round robin
See NEGOTIATOR_DEPTH_FIRST, which was introduced in version 8.8.2.
If you set it to false, you should see the behavior you're looking for.
Michael V Pelletier
Principal Engineer
Raytheon Technologies
Digital Technology
HPC Support Team
_______________________________________________
HTCondor-users mailing list
To unsubscribe, send a message to
htcondor-users-request@xxxxxxxxxxx with a
subject: Unsubscribe
You can also unsubscribe by visiting
https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.cs.wisc.edu_mailman_listinfo_htcondor-2Dusers&d=DwICAg&c=WdwKmQaPYCZq3ZY-wllUZB0L-BOaCTNMIdrWHq8UZ_4&r=TsFqz1fYO3UwE6LUWx2K2T75_Pte5lPZcaUk-Bn-AoA&m=p-SVkyR9PR-zgjqL9q1NtrMhHT8omfNkHM_CVaJ5P_Y&s=x2OH3o-rUaqn-hfWrOcr8hSFrtXoxtCcz71CUKsfey4&e=
The archives can be found at:
https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.cs.wisc.edu_archive_htcondor-2Dusers_&d=DwICAg&c=WdwKmQaPYCZq3ZY-wllUZB0L-BOaCTNMIdrWHq8UZ_4&r=TsFqz1fYO3UwE6LUWx2K2T75_Pte5lPZcaUk-Bn-AoA&m=p-SVkyR9PR-zgjqL9q1NtrMhHT8omfNkHM_CVaJ5P_Y&s=JSs5VBHIE8v3ZllCXjEy5sydulgpF8rBOkxbczoF3bo&e=
______________________________________________________________________
Este e-mail dirige-se apenas aos destinatários acima indicados, sendo proibida a sua divulgação, total ou parcial, ou o uso ou reenvio não autorizados. Se recebeu este e-mail por engano, por favor notifique o remetente imediatamente via e-mail e exclua-o do
seu sistema.
O Banco de Portugal trata os dados pessoais de acordo com os princípios e regras decorrentes da legislação europeia e nacional, em especial do Regulamento (UE) 2016/679, do Parlamento Europeu e do Conselho, de 27 de abril de 2016. Para mais informações consulte
a Página do Banco de Portugal sobre proteção de dados. Em caso de dúvidas, pode contactar o Encarregado da Proteção de Dados para o seguinte e-mail: (encarregado.protecao.dados@xxxxxxxxxxxx). Pode
também consultar a Autoridade Nacional da Proteção de Dados.
This e-mail is intended only for the use of the recipient(s) named above. Any unauthorised disclosure use or dissemination, either in whole or in part, is prohibited. If you have received this e-mail in error, please notify the sender immediately via e-mail
and delete this e-mail from your system.
Banco de Portugal processes personal data in line with the principles and rules in European and national legislation, in particular Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016. For further information, see Banco de
Portugal’s webpage on data protection. In case of queries, please contact Banco de Portugal’s Data Protection Officer (encarregado.protecao.dados@xxxxxxxxxxxx). You may also contact the Portuguese
Data Protection Authority (Comissão Nacional de Proteção de Dados).
_______________________________________________
HTCondor-users mailing list
To unsubscribe, send a message to
htcondor-users-request@xxxxxxxxxxx with a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users
The archives can be found at:
https://lists.cs.wisc.edu/archive/htcondor-users/
![[Computer Systems Lab]](http://www.cs.wisc.edu/pics/csl_logo.gif){kind=logo}