i submit a simple serial job, but the status of the job is in idle.
how to excute it.
At 2015-04-21 17:20:03, htcondor-users-request@xxxxxxxxxxx wrote:
>Send HTCondor-users mailing list submissions to
> htcondor-users@xxxxxxxxxxx
>
>To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users
>or, via email, send a message with subject or body 'help' to
> htcondor-users-request@xxxxxxxxxxx
>
>You can reach the person managing the list at
> htcondor-users-owner@xxxxxxxxxxx
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of HTCondor-users digest..."
>
>
>Today's Topics:
>
> 1. Fedora 21 (Massimo Canonico)
> 2. Re: Fedora 21 (Tim St Clair)
> 3. Re: Fedora 21 (Ben Cotton)
> 4. Re: Fedora 21 (Brian Bockelman)
> 5. Re: Fedora 21 (Dimitri Maziuk)
> 6. Re: Fedora 21 (Brian Bockelman)
> 7. Re: Fedora 21 (Dimitri Maziuk)
> 8. Re: Fedora 21 (Massimo Canonico)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Mon, 20 Apr 2015 17:14:10 +0200
>From: Massimo Canonico <mex@xxxxxxxxxxxx>
>To: htcondor-users@xxxxxxxxxxx
>Subject: [HTCondor-users] Fedora 21
>Message-ID: <553517C2.7070909@xxxxxxxxxxxx>
>Content-Type: text/plain; charset=utf-8; format=flowed
>
>Hi all,
>this could be a "newbie" question, sorry in advance.
>
>I have installed condor with "sudo yum install condor" in my fedora 21
>machine (package name: condor-8.3.1-1.fc21.x86_64) .
>(Please consider that I want all condor daemons running in one machine).
>
>Then I edit to /etc/condor/condor_config and I changed (only the part 1):
>- the field "CONDOR_HOST" by setting it with the fully qualified
>hostname of my machine.
>- the field "LOCAL_CONFIG_DIR" by setting it with /etc/condor/config.d
>- the $(FULL_HOSTNAME) with the fully qualified hostname of my machine
>
>If I am not wrong, now I should be able to start up all condor daemons,
>but when I run:
>[mex@minicloud ~]$ sudo /sbin/service condor start
>Redirecting to /bin/systemctl start condor.service
>
>no errors raise, but if I check the condor status I got:
>[mex@minicloud ~]$ sudo /sbin/service condor start
>Redirecting to /bin/systemctl start condor.service
>[mex@minicloud ~]$ sudo service condor status
>Redirecting to /bin/systemctl status condor.service
>condor.service - Condor Distributed High-Throughput-Computing
> Loaded: loaded (/usr/lib/systemd/system/condor.service; disabled)
> Active: activating (auto-restart) (Result: exit-code) since Mon
>2015-04-20 17:09:34 CEST; 349ms ago
> Process: 30119 ExecStop=/usr/sbin/condor_off -master (code=exited,
>status=1/FAILURE)
> Process: 30117 ExecStart=/usr/sbin/condor_master -f (code=exited,
>status=4)
> Main PID: 30117 (code=exited, status=4)
>
>I'm sure that I'm missing something but I do not know what.
>
>Thanks,
>M
>
>
>
>
>
>------------------------------
>
>Message: 2
>Date: Mon, 20 Apr 2015 11:46:46 -0400 (EDT)
>From: Tim St Clair <tstclair@xxxxxxxxxx>
>To: HTCondor-Users Mail List <htcondor-users@xxxxxxxxxxx>
>Subject: Re: [HTCondor-users] Fedora 21
>Message-ID:
> <1394449399.3659131.1429544806857.JavaMail.zimbra@xxxxxxxxxx>
>Content-Type: text/plain; charset=utf-8
>
>Please feel free to file a Bugzilla on the issue.
>https://bugzilla.redhat.com/enter_bug.cgi?classification=Fedora
>
>
>----- Original Message -----
>> From: "Massimo Canonico" <mex@xxxxxxxxxxxx>
>> To: htcondor-users@xxxxxxxxxxx
>> Sent: Monday, April 20, 2015 10:14:10 AM
>> Subject: [HTCondor-users] Fedora 21
>>
>> Hi all,
>> this could be a "newbie" question, sorry in advance.
>>
>> I have installed condor with "sudo yum install condor" in my fedora 21
>> machine (package name: condor-8.3.1-1.fc21.x86_64) .
>> (Please consider that I want all condor daemons running in one machine).
>>
>> Then I edit to /etc/condor/condor_config and I changed (only the part 1):
>> - the field "CONDOR_HOST" by setting it with the fully qualified
>> hostname of my machine.
>> - the field "LOCAL_CONFIG_DIR" by setting it with /etc/condor/config.d
>> - the $(FULL_HOSTNAME) with the fully qualified hostname of my machine
>>
>> If I am not wrong, now I should be able to start up all condor daemons,
>> but when I run:
>> [mex@minicloud ~]$ sudo /sbin/service condor start
>> Redirecting to /bin/systemctl start condor.service
>>
>> no errors raise, but if I check the condor status I got:
>> [mex@minicloud ~]$ sudo /sbin/service condor start
>> Redirecting to /bin/systemctl start condor.service
>> [mex@minicloud ~]$ sudo service condor status
>> Redirecting to /bin/systemctl status condor.service
>> condor.service - Condor Distributed High-Throughput-Computing
>> Loaded: loaded (/usr/lib/systemd/system/condor.service; disabled)
>> Active: activating (auto-restart) (Result: exit-code) since Mon
>> 2015-04-20 17:09:34 CEST; 349ms ago
>> Process: 30119 ExecStop=/usr/sbin/condor_off -master (code=exited,
>> status=1/FAILURE)
>> Process: 30117 ExecStart=/usr/sbin/condor_master -f (code=exited,
>> status=4)
>> Main PID: 30117 (code=exited, status=4)
>>
>> I'm sure that I'm missing something but I do not know what.
>>
>> Thanks,
>> M
>>
>>
>>
>> _______________________________________________
>> HTCondor-users mailing list
>> To unsubscribe, send a message to htcondor-users-request@xxxxxxxxxxx with a
>> subject: Unsubscribe
>> You can also unsubscribe by visiting
>> https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users
>>
>> The archives can be found at:
>> https://lists.cs.wisc.edu/archive/htcondor-users/
>>
>
>--
>Cheers,
>Timothy St. Clair
>Red Hat Inc.
>
>
>------------------------------
>
>Message: 3
>Date: Mon, 20 Apr 2015 12:17:34 -0400
>From: Ben Cotton <ben.cotton@xxxxxxxxxxxxxxxxxx>
>To: HTCondor-Users Mail List <htcondor-users@xxxxxxxxxxx>
>Subject: Re: [HTCondor-users] Fedora 21
>Message-ID:
> <CA+dqS7VzL0sQ144yFcEXrGKxY312-efRXo5iJQM2xCJ1Tm3+UA@xxxxxxxxxxxxxx>
>Content-Type: text/plain; charset=UTF-8
>
>I was able to reproduce the bug so I took the liberty of filing the BZ
>since I didn't see one yet:
>https://bugzilla.redhat.com/show_bug.cgi?id=1213472
>
>The TL;DR is that the config sets RUN = /var/run/condor, but the
>package apparently does not create that directory.
>
>Massimo, as a short-term workaround, you can just create that
>directory owned by the 'condor' user and your daemons should start
>correctly.
>
>
>Thanks,
>BC
>
>--
>Ben Cotton
>main: 888.292.5320
>
>Cycle Computing
>Better Answers. Faster.
>
>http://www.cyclecomputing.com
>twitter: @cyclecomputing
>
>
>------------------------------
>
>Message: 4
>Date: Mon, 20 Apr 2015 12:19:35 -0500
>From: Brian Bockelman <bbockelm@xxxxxxxxxxx>
>To: HTCondor-Users Mail List <htcondor-users@xxxxxxxxxxx>
>Subject: Re: [HTCondor-users] Fedora 21
>Message-ID: <0FD2AF76-D4AD-42F4-BB5A-787A23D06A99@xxxxxxxxxxx>
>Content-Type: text/plain; charset=us-ascii
>
>Hi,
>
>Further investigation shows -
>- RPM does not create the directory on install.
>- RPM does set things up so the directory is created on boot if not present.*
>
>So, it does look like some tweaking of the RPM will be necessary. TimT - can you file a ticket?
>
>Brian
>
>* NOTE: We have reserved a specific UID for HTCondor on Fedora (this allows consistent UIDs if you put some pieces on a shared filesystem [not recommended]); much less effort is required from you if you don't try to change this (i.e., put the condor user in LDAP).
>
>> On Apr 20, 2015, at 11:17 AM, Ben Cotton <ben.cotton@xxxxxxxxxxxxxxxxxx> wrote:
>>
>> I was able to reproduce the bug so I took the liberty of filing the BZ
>> since I didn't see one yet:
>> https://bugzilla.redhat.com/show_bug.cgi?id=1213472
>>
>> The TL;DR is that the config sets RUN = /var/run/condor, but the
>> package apparently does not create that directory.
>>
>> Massimo, as a short-term workaround, you can just create that
>> directory owned by the 'condor' user and your daemons should start
>> correctly.
>>
>>
>> Thanks,
>> BC
>>
>> --
>> Ben Cotton
>> main: 888.292.5320
>>
>> Cycle Computing
>> Better Answers. Faster.
>>
>> http://www.cyclecomputing.com
>> twitter: @cyclecomputing
>> _______________________________________________
>> HTCondor-users mailing list
>> To unsubscribe, send a message to htcondor-users-request@xxxxxxxxxxx with a
>> subject: Unsubscribe
>> You can also unsubscribe by visiting
>> https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users
>>
>> The archives can be found at:
>> https://lists.cs.wisc.edu/archive/htcondor-users/
>
>
>
>
>------------------------------
>
>Message: 5
>Date: Mon, 20 Apr 2015 12:43:05 -0500
>From: Dimitri Maziuk <dmaziuk@xxxxxxxxxxxxx>
>To: htcondor-users@xxxxxxxxxxx
>Subject: Re: [HTCondor-users] Fedora 21
>Message-ID: <55353AA9.2030206@xxxxxxxxxxxxx>
>Content-Type: text/plain; charset="windows-1252"
>
>On 04/20/2015 12:19 PM, Brian Bockelman wrote:
>> Hi,
>>
>> Further investigation shows -
>> - RPM does not create the directory on install.
>> - RPM does set things up so the directory is created on boot if not present.*
>>
>> So, it does look like some tweaking of the RPM will be necessary. TimT - can you file a ticket?
>
>Isn't this the same thing we just did in the "centos 7 problem" thread?
>-- /run in tmpfs, /etc/tmpfiles.d not working due to systemd's
>out-of-whack startup?
>
>--
>Dimitri Maziuk
>Programmer/sysadmin
>BioMagResBank, UW-Madison -- http://www.bmrb.wisc.edu
>
>-------------- next part --------------
>A non-text attachment was scrubbed...
>Name: signature.asc
>Type: application/pgp-signature
>Size: 190 bytes
>Desc: OpenPGP digital signature
>URL: <https://www-auth.cs.wisc.edu/lists/htcondor-users/attachments/20150420/441637d1/attachment.sig>
>
>------------------------------
>
>Message: 6
>Date: Mon, 20 Apr 2015 13:12:24 -0500
>From: Brian Bockelman <bbockelm@xxxxxxxxxxx>
>To: HTCondor-Users Mail List <htcondor-users@xxxxxxxxxxx>
>Subject: Re: [HTCondor-users] Fedora 21
>Message-ID: <8E50D488-FC16-4C59-B78C-822808C1F628@xxxxxxxxxxx>
>Content-Type: text/plain; charset=windows-1252
>
>
>> On Apr 20, 2015, at 12:43 PM, Dimitri Maziuk <dmaziuk@xxxxxxxxxxxxx> wrote:
>>
>> On 04/20/2015 12:19 PM, Brian Bockelman wrote:
>>> Hi,
>>>
>>> Further investigation shows -
>>> - RPM does not create the directory on install.
>>> - RPM does set things up so the directory is created on boot if not present.*
>>>
>>> So, it does look like some tweaking of the RPM will be necessary. TimT - can you file a ticket?
>>
>> Isn't this the same thing we just did in the "centos 7 problem" thread?
>> -- /run in tmpfs, /etc/tmpfiles.d not working due to systemd's
>> out-of-whack startup?
>>
>
>Nope. Ben reported things work on reboot, but not post-install-pre-reboot.
>
>The prior thread covered the piece I mentioned in the footnote; condor user not being defined locally to the system.
>
>Brian
>
>
>------------------------------
>
>Message: 7
>Date: Mon, 20 Apr 2015 14:01:47 -0500
>From: Dimitri Maziuk <dmaziuk@xxxxxxxxxxxxx>
>To: htcondor-users@xxxxxxxxxxx
>Subject: Re: [HTCondor-users] Fedora 21
>Message-ID: <55354D1B.9080003@xxxxxxxxxxxxx>
>Content-Type: text/plain; charset="windows-1252"
>
>On 04/20/2015 01:12 PM, Brian Bockelman wrote:
>>
>> Nope. Ben reported things work on reboot, but not post-install-pre-reboot.
>
>Ah. I guess I missed that one because I install condor together with the
>initial "yum up" so I do post-install reboot right away.
>
>
>--
>Dimitri Maziuk
>Programmer/sysadmin
>BioMagResBank, UW-Madison -- http://www.bmrb.wisc.edu
>
>-------------- next part --------------
>A non-text attachment was scrubbed...
>Name: signature.asc
>Type: application/pgp-signature
>Size: 190 bytes
>Desc: OpenPGP digital signature
>URL: <https://www-auth.cs.wisc.edu/lists/htcondor-users/attachments/20150420/da3c9921/attachment.sig>
>
>------------------------------
>
>Message: 8
>Date: Tue, 21 Apr 2015 11:18:50 +0200
>From: Massimo Canonico <mex@xxxxxxxxxxxx>
>To: HTCondor-Users Mail List <htcondor-users@xxxxxxxxxxx>
>Subject: Re: [HTCondor-users] Fedora 21
>Message-ID: <553615FA.8080206@xxxxxxxxxxxx>
>Content-Type: text/plain; charset="windows-1252"; Format="flowed"
>
>Thanks for all your replies.
>
>With the RPM, the user condor is not created.
>
>I think I'll go for a source code (.tgz) installation instead of this
>(buggy) rpm code.
>
>M
>
>
>On 04/20/2015 09:01 PM, Dimitri Maziuk wrote:
>> On 04/20/2015 01:12 PM, Brian Bockelman wrote:
>>> Nope. Ben reported things work on reboot, but not post-install-pre-reboot.
>> Ah. I guess I missed that one because I install condor together with the
>> initial "yum up" so I do post-install reboot right away.
>>
>>
>>
>>
>> _______________________________________________
>> HTCondor-users mailing list
>> To unsubscribe, send a message to htcondor-users-request@xxxxxxxxxxx with a
>> subject: Unsubscribe
>> You can also unsubscribe by visiting
>> https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users
>>
>> The archives can be found at:
>> https://lists.cs.wisc.edu/archive/htcondor-users/
>
>-------------- next part --------------
>An HTML attachment was scrubbed...
>URL: <https://www-auth.cs.wisc.edu/lists/htcondor-users/attachments/20150421/f2e1a0cf/attachment.html>
>
>------------------------------
>
>Subject: Digest Footer
>
>_______________________________________________
>HTCondor-users mailing list
>HTCondor-users@xxxxxxxxxxx
>https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users
>
>------------------------------
>
>End of HTCondor-users Digest, Vol 17, Issue 26
>**********************************************
![[Computer Systems Lab]](http://www.cs.wisc.edu/pics/csl_logo.gif){kind=logo}