Re: [Condor-users] kbdd not working on windows server 2008

["Michael O'Donnell" <odonnellm@xxxxxxxx>]

On a couple servers and my central manager
I have opened permissions so I can write to the C dirve but this is not
the norm for me:
C:\Condor\log BUILTIN\Administrators:(I)(F)
           
  BUILTIN\Administrators:(I)(OI)(CI)(IO)(F)
           
  NT AUTHORITY\SYSTEM:(I)(F)
           
  NT AUTHORITY\SYSTEM:(I)(OI)(CI)(IO)(F)
           
  BUILTIN\Users:(I)(OI)(CI)(RX)
           
  NT AUTHORITY\Authenticated Users:(I)(M)
           
  NT AUTHORITY\Authenticated Users:(I)(OI)(CI)(IO)(M)

As I mentioned in a previous I use the
following config so a log file for the kbdd is not used--this should be
an easy test.:
KBDD_LOG = C:\NUL

Since I use the above, I do not get
any kbdd log files so the above file/folder permissions do not apply.

mike

From:	"John (TJ) Knoeller" <johnkn@xxxxxxxxxxx>
To:	condor-users@xxxxxxxxxxx
Date:	07/26/2011 09:36 AM
Subject:	Re: [Condor-users] kbdd not working on windows server 2008
Sent by:	condor-users-bounces@xxxxxxxxxxx

---

Michael, it might be helpful for you to share the results
from ICACLS just like Eric did so we can compare them.

-tj


On 7/25/2011 9:45 PM, Michael O'Donnell wrote: 
Erik, sorry for diverging from your
topic. I have a windows 2008 Standard server that runs Condor 7.6.1 as
an execute node and the kbdd does run on this machine. Would you mind restating
the problem, and I will see it I can duplicate it on our pool.

thanks, 
mike

From:	Eric Abel <Eric.Abel@xxxxxxxxxx>
To:	Condor-Users Mail List <condor-users@xxxxxxxxxxx>
Date:	07/25/2011 10:02 AM
Subject:	Re: [Condor-users] kbdd not working on windows server 2008
Sent by:	condor-users-bounces@xxxxxxxxxxx

---

It seems like this thread has diverged from the original topic J.
 Does anyone have any additional suggestions for troubleshooting the
original issue? 
  
Thanks, 
  
Eric 
  
From: condor-users-bounces@xxxxxxxxxxx
[mailto:condor-users-bounces@xxxxxxxxxxx]
On Behalf Of Ziliang Guo
Sent: Sunday, July 24, 2011 7:27 PM
To: Condor-Users Mail List
Subject: Re: [Condor-users] kbdd not working on windows server 2008
  
During testing on a vanilla install of Condor I've seen updates not show
up for quite some time.  I don't think the wakeup timer is set to
5 seconds, unless we have differing behavior for when the kbdd believes
a system is idle and when it is in use.  The notification code in
kbdd was present before we adapted it for use on Windows over two years
ago, so am really hazy right now.  Again, will doublecheck behavior
once in the office tomorrow.  That kbdd can do a better job than its
current iteration is however becoming very evident.
On Sun, Jul 24, 2011 at 9:09 PM, <Greg.Hitchen@xxxxxxxx>
wrote: 
Doesn't the condor_kbdd send an update to the condor_startd every 5 seconds?
That's certainly what appears to be happening according to the StartLog
file 
(I have replaced some IP numbers with * 's): 
  
07/25/11 10:01:15 Received UDP command 427 (X_EVENT_NOTIFICATION) from
 <*.*.146.156:13837>, access level ALLOW
07/25/11 10:01:15 Calling HandleReq <command_x_event> (0)
07/25/11 10:01:15 Return from HandleReq <command_x_event> (handler:
0.000s, sec: 0.000s)
07/25/11 10:01:20 Received UDP command 427 (X_EVENT_NOTIFICATION) from
 <*.*.146.156:13837>, access level ALLOW
07/25/11 10:01:20 Calling HandleReq <command_x_event> (0)
07/25/11 10:01:20 Return from HandleReq <command_x_event> (handler:
0.000s, sec: 0.000s)
07/25/11 10:01:25 Received UDP command 427 (X_EVENT_NOTIFICATION) from
 <*.*.146.156:13837>, access level ALLOW
07/25/11 10:01:25 Calling HandleReq <command_x_event> (0)
07/25/11 10:01:25 Return from HandleReq <command_x_event> (handler:
0.000s, sec: 0.000s) 
Running the command: 
  
condor_status -l -direct machinename | findstr ConsoleIdle
  
continuously shows this as well as ConsoleIdle cycles from 0 up to 5 (0,1,2,3,4,5),
then back 
to 0 and cycles again, etc. when it is run from the computer "machinename".
  
Without the -direct option you are querying the Collector rather than machinename
directly 
so there can be a delay of up to UPDATE_INTERVAL (default 300s = 5 min).
However the startd will see activity and take the appropriate action (if
any) quickly. 
  
Cheers 
  
Greg

---

From: condor-users-bounces@xxxxxxxxxxx
[mailto:condor-users-bounces@xxxxxxxxxxx]
On Behalf Of Ziliang Guo 
Sent: Monday, 25 July 2011 7:50 AM 

To: Condor-Users Mail List
Subject: Re: [Condor-users] kbdd not working on windows server 2008
  
Uh, of course it doesn't if it's running like it does under XP.  If
it's running under the Condor service in the system session, it can't see
keyboard activity.  Which is why we've been trying to get it to run
in the user session on user login.  Even when running under the user
session, it can be up to 5 minutes before the startd is updated about keyboard/mouse
activity.


-- 
Condor Project Windows Developer 

_______________________________________________
Condor-users mailing list
To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx
with a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/condor-users

The archives can be found at:
https://lists.cs.wisc.edu/archive/condor-users/



-- 
Condor Project Windows Developer_______________________________________________
Condor-users mailing list
To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx
with a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/condor-users

The archives can be found at:
https://lists.cs.wisc.edu/archive/condor-users/




_______________________________________________
Condor-users mailing list
To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx
with a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/condor-users

The archives can be found at:
https://lists.cs.wisc.edu/archive/condor-users/
_______________________________________________
Condor-users mailing list
To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with
a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/condor-users

The archives can be found at:
https://lists.cs.wisc.edu/archive/condor-users/