On Thu, Nov 4, 2010 at 12:55 PM,
<kschwarz@xxxxxxxxxxxxxx> wrote:
I have checked the machines and there
are no firewall enabled. Remind that the CM is a linux machine and the
executors and schedulers are Windows machines. In another pool based only
on Windows machines that were cloned from one of the first pool, jobs have
run successfuly.
Any hint?
Klaus
Klaus Otto Schwarzmeier
Senior Engineer, R&T - Systems Modeling & Simulation
Embraer - São José dos Campos
Phone: +55 (12) 3927-3947 - Fax: +55 (12) 3927-6600 ext 8685
We've seen this issue b4, and however odd this may
sound, please verify
your firewall settings in case you are using something other then the
windows-fw.
For a temporary test, you might try disabling just to see if a job
runs.
Cheers,
Tim
On Thu, 2010-10-28 at 08:44 -0200, kschwarz@xxxxxxxxxxxxxx wrote:
>
> I am trying to upgrade from version 7.2.4 to 7.4.4. (Windows and Linux
> executors and Linux CM).
> Submitting a simple job it stucks in the queue.
>
> condor_status gives:
>
> Name OpSys
Arch State Activity LoadAv Mem
> ActvtyTime
>
> slot1@xxxxxxxxxxxx LINUX X86_64 Unclaimed Idle
0.000 1983 0
> +03:42:06
> slot2@xxxxxxxxxxxx LINUX X86_64 Unclaimed Idle
0.000 1983 0
> +15:42:33
> <snip>
> slot1@xxxxxxxxxxxx LINUX X86_64 Unclaimed Idle
0.070 1983 0
> +01:46:35
> slot2@xxxxxxxxxxxx LINUX X86_64 Unclaimed Idle
0.000 1983 1
> +18:46:32
> CONDOR-XXX-PC2.xxx WINNT52 INTEL Unclaimed Idle
0.000 1023 0
> +00:27:05
> condor-xxx-pc1.xxx WINNT52 INTEL Unclaimed Idle
0.000 1023 0
> +00:35:04
> slot1@xxxxxxxxxxxx WINNT61 INTEL Owner
Idle 0.120 4061 0
> +01:01:34
> slot2@xxxxxxxxxxxx WINNT61 INTEL Owner
Idle 0.000 4061 0
> +01:01:35
>
Total Owner Claimed Unclaimed Matched Preempting
> Backfill
>
> INTEL/WINNT52 2
0 0 2
0 0
> 0
> INTEL/WINNT61 2
2 0 0
0 0
> 0
> X86_64/LINUX 18
0 0 18
0 0
> 0
>
> Total
22 2 0 20
0 0
> 0
>
>
> condor_q -better-analyze 3.0 gives:
>
> -- Submitter: PC303344.xxxxx : <10.3.29.182:19936> : PC303344.xxxxx
> ---
> 003.000: Run analysis summary. Of 22 machines,
> 21 are rejected by your job's requirements
> 0 reject your job because of their own requirements
> 0 match but are serving users with a better priority
in the
> pool
> 1 match but reject the job for unknown reasons
> 0 match but will not currently preempt their
existing job
> 0 match but are currently offline
> 0 are available to run your job
>
> The Requirements _expression_ for your job is:
>
> ( target.machine == "condor-xxx-pc1.xxxxx" &&
> ( target.OpSysGeneric == "WINNT" ) ) && ( target.Arch
== "INTEL" ) &&
> ( target.Disk >= DiskUsage ) && ( ( target.Memory * 1024
) >=
> ImageSize ) &&
> ( ( RequestMemory * 1024 ) >= ImageSize ) &&
> ( target.HasFileTransfer )
>
> Condition
Machines Matched Suggestion
> ---------
---------------- ----------
> 1 ( ( 1024 * ceiling(ifThenElse(JobVMMemory isnt
> undefined,JobVMMemory,9.765625000000000E-004)) ) >= 1 )
>
0
REMOVE
> 2 target.machine == "condor-xxx-pc1.xxxxx"
>
1
> 3 ( target.OpSysGeneric == "WINNT" )4
> 4 ( target.Arch == "INTEL" )
4
> 5 ( target.Disk >= 1 )
22
> 6 ( ( 1024 * target.Memory ) >= 1 ) 22
> 7 ( target.HasFileTransfer ) 22
>
> The condition 1 is being suggested to be removed.
> Looking in other related problems in the condor-users list I found
> that in version 7.4.3 the RequestMemory _expression_ has been changed
> to
>
> RequestMemory = ceiling(ifThenElse(JobVMMemory =!= UNDEFINED,
> JobVMMemory, ImageSize / 1024.000000))
>
> My image size is 1. So there are machines available (22)
>
> JobVMMemory isnt undefined, therefore the JobVMMemory =!= UNDEFINED
> evaluates to True !
>
> I have not found the JobVMMemory in the condor_q -l 3.0 output
>
> How could I overcome this issue?
>
> Thanks,
> Klaus
>
> Output from condor_q -l 3.0
>
> -- Submitter: PC303344.xxxxx : <10.3.29.182:19936> : PC303344.xxxxx
> ClusterId = 3
> QDate = 1288175033
> CompletionDate = 0
> Owner = "ZZZZZZZZ"
> NTDomain = "XXXXX"
> WindowsMajorVersion = 6
> WindowsMinorVersion = 1
> WindowsBuildNumber = 7600
> WindowsServicePackMajorVersion = 0
> WindowsServicePackMinorVersion = 0
> WindowsProductType = 1
> RemoteWallClockTime = 0.000000
> LocalUserCpu = 0.000000
> LocalSysCpu = 0.000000
> RemoteUserCpu = 0.000000
> RemoteSysCpu = 0.000000
> ExitStatus = 0
> NumCkpts_RAW = 0
> NumCkpts = 0
> NumJobStarts = 0
> NumRestarts = 0
> NumSystemHolds = 0
> CommittedTime = 0
> TotalSuspensions = 0
> LastSuspensionTime = 0
> CumulativeSuspensionTime = 0
> ExitBySignal = FALSE
> CondorVersion = "$CondorVersion: 7.4.4 Oct 13 2010 BuildID: 279383
$"
> CondorPlatform = "$CondorPlatform: INTEL-WINNT50 $"
> Iwd = "C:\Condor_Test"
> JobUniverse = 5
> Cmd = "C:\Condor_Test\simple.bat"
> MinHosts = 1
> MaxHosts = 1
> CurrentHosts = 0
> WantRemoteSyscalls = FALSE
> WantCheckpoint = FALSE
> RequestCpus = 1
> EnteredCurrentStatus = 1288175033
> JobPrio = 0
> User = "ZZZZZZZZ@xxxxxxxxxxxxxx"
> NiceUser = FALSE
> Environment = ""
> JobNotification = 2
> WantRemoteIO = TRUE
> UserLog = "C:\Condor_Test\simple.log"
> CoreSize = 0
> Rank = 0.000000
> In = "/dev/null"
> TransferIn = FALSE
> Out = "simple.out"
> StreamOut = FALSE
> Err = "simple.err"
> StreamErr = FALSE
> BufferSize = 524288
> BufferBlockSize = 32768
> ShouldTransferFiles = "YES"
> WhenToTransferOutput = "ON_EXIT"
> TransferFiles = "ONEXIT"
> ImageSize_RAW = 1
> ImageSize = 1
> ExecutableSize_RAW = 1
> ExecutableSize = 1
> DiskUsage_RAW = 1
> DiskUsage = 1
> RequestMemory = ceiling(ifThenElse(JobVMMemory =!= UNDEFINED,
> JobVMMemory, ImageSize / 1024.000000))
> RequestDisk = DiskUsage
> Requirements = (machine == "condor-xxx-pc1.xxxxx" &&
(OpSysGeneric ==
> "WINNT")) && (Arch == "INTEL") &&
(Disk >= DiskUsage) && ((Memory *
> 1024) >= ImageSize) && ((RequestMemory * 1024) >= ImageSize)
&&
> (HasFileTransfer)
> JobLeaseDuration = 1200
> PeriodicHold = FALSE
> PeriodicRelease = FALSE
> PeriodicRemove = FALSE
>
>
> LeaveJobInQueue = FALSE
> Args = "4 12"
> GlobalJobId = "PC303344.xxxxx#3.0#1288175033"
> LastJobStatus = 0
> JobStatus = 1
> ProcId = 0
> ScheddBday = 1288256462
> ServerTime = 1288259804
>
>
> ______________________________________________________________________
> This message is intended solely for the use of its addressee and may
> contain privileged or confidential information. All information
> contained herein shall be treated as confidential and shall not be
> disclosed to any third party without Embraer’s prior written approval.
> If you are not the addressee you should not distribute, copy or file
> this message. In this case, please notify the sender and destroy its
> contents immediately.
> Esta mensagem é para uso exclusivo de seu destinatário e pode conter
> informações privilegiadas e confidenciais. Todas as informações aqui
> contidas devem ser tratadas como confidenciais e não devem ser
> divulgadas a terceiros sem o prévio consentimento por escrito da
> Embraer. Se você não é o destinatário não deve distribuir, copiar
ou
> arquivar a mensagem. Neste caso, por favor, notifique o remetente
da
> mesma e destrua imediatamente a mensagem.
> _______________________________________________
> Condor-users mailing list
> To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx
with a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
>
> The archives can be found at:
> https://lists.cs.wisc.edu/archive/condor-users/
_______________________________________________
Condor-users mailing list
To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with
a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/condor-users
The archives can be found at:
https://lists.cs.wisc.edu/archive/condor-users/
This message is intended solely for the
use of its addressee and may contain privileged or confidential information.
All information contained herein shall be treated as confidential and shall
not be disclosed to any third party without Embraer’s prior written approval.
If you are not the addressee you should not distribute, copy or file this
message. In this case, please notify the sender and destroy its contents
immediately.
Esta mensagem é para uso exclusivo de seu destinatário e pode conter informações
privilegiadas e confidenciais. Todas as informações aqui contidas devem
ser tratadas como confidenciais e não devem ser divulgadas a terceiros
sem o prévio consentimento por escrito da Embraer. Se você não é o destinatário
não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor,
notifique o remetente da mesma e destrua imediatamente a mensagem.
_______________________________________________
Condor-users mailing list
To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/condor-users
The archives can be found at:
https://lists.cs.wisc.edu/archive/condor-users/
![[Computer Systems Lab]](http://www.cs.wisc.edu/pics/csl_logo.gif){kind=logo}