Re: [Condor-users] (no subject)

["Kewley, J \(John\)" <j.kewley@xxxxxxxx>]

Neither looks.txt nor looks_angles.txt are there.

Notice there is no build.bat either, but that gets renamed
as condor.bat. All other files needed to run your job (at 
least those you mentioned in your submit file are there.

If you creat a new directory and copy all those files into it and 
run build.bat, what does the resulting directory structure look like?

Was that dir done before or after the program was run?
Maybe you should do a dir before AND after the run of build_looks.exe
to see what files are created

cheers

JK

> -----Original Message-----
> From: condor-users-bounces@xxxxxxxxxxx
> [mailto:condor-users-bounces@xxxxxxxxxxx]On Behalf Of 
> Richardson, Joshua
> Sent: Wednesday, June 13, 2007 1:10 PM
> To: Condor-Users Mail List
> Subject: Re: [Condor-users] (no subject)
> 
> 
> Ok. So the output after "dir" is:
> 
> Directory of C:\condor\execute\dir_1728
> 
> 06/13/2007  07:54 AM    <DIR>          .
> 06/13/2007  07:54 AM    <DIR>          ..
> 06/13/2007  07:54 AM                 0 build-err.txt
> 06/13/2007  07:54 AM                 0 build-out.txt
> 06/13/2007  07:51 AM         2,529,988 build_looks.exe
> 06/13/2007  07:51 AM                46 condor_exec.bat
> 06/13/2007  07:51 AM             5,202 long_run.props
> 06/13/2007  07:51 AM            66,512 middle_east_targets.txt
>                6 File(s)      2,601,748 bytes
>                2 Dir(s)  133,630,238,720 bytes free
> 
> I looked on the computer that is running the job and it seems to be a
> temp folder and disappears after the job is completed.
> 
> The log is:
> 
> 00 (091.000.000) 06/13 07:55:00 Job submitted from host:
> <192.168.168.98:1112>
> ...
> 001 (091.000.000) 06/13 07:55:08 Job executing on host:
> <192.168.168.197:1115>
> ...
> 005 (091.000.000) 06/13 07:55:09 Job terminated.
> 	(1) Normal termination (return value 0)
> 		Usr 0 00:00:00, Sys 0 00:00:00  -  Run Remote Usage
> 		Usr 0 00:00:00, Sys 0 00:00:00  -  Run Local Usage
> 		Usr 0 00:00:00, Sys 0 00:00:00  -  Total Remote Usage
> 		Usr 0 00:00:00, Sys 0 00:00:00  -  Total Local Usage
> 	640  -  Run Bytes Sent By Job
> 	2601748  -  Run Bytes Received By Job
> 	640  -  Total Bytes Sent By Job
> 	2601748  -  Total Bytes Received By Job
> 
> Josh Richardson
> Integrity Applications Incorporated Intern (IAI)
> 703-378-8672 ext 632
>  
> 
> -----Original Message-----
> From: condor-users-bounces@xxxxxxxxxxx
> [mailto:condor-users-bounces@xxxxxxxxxxx] On Behalf Of 
> Kewley, J (John)
> Sent: Wednesday, June 13, 2007 4:30 AM
> To: Condor-Users Mail List
> Subject: Re: [Condor-users] (no subject)
> 
> > Ok. So I do not need the Arguments or the 
> > transfer_output_files set. My
> > build.bat is start build_looks.exe -f long_run.props. 
> Should there be
> > more there to get a file returned? When I submit it like 
> this, the log
> > is:
> > ...
> > It returns nothing and finishes within a couple of seconds. 
> Outside of
> > Condor it takes minutes for the program to run so I know this is not
> > correct.
> 
> If build.bat takes no params, then no arguments are neccessary.
> 
> Does your job create those files in a subdirectory? If so, 
> condor won't
> return them
> automatically, only the ones created in the main directory 
> where the job
> runs.
> 
> Try adding a "dir" at the end of your .bat file so you can see what
> files are in 
> that directory.
> 
> JK
> 
> _______________________________________________
> Condor-users mailing list
> To unsubscribe, send a message to 
> condor-users-request@xxxxxxxxxxx with
> a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> 
> The archives can be found at: 
> https://lists.cs.wisc.edu/archive/condor-users/
> 
> _______________________________________________
> Condor-users mailing list
> To unsubscribe, send a message to 
> condor-users-request@xxxxxxxxxxx with a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> 
> The archives can be found at: 
> https://lists.cs.wisc.edu/archive/condor-users/
>