Re: [Condor-users] i have a problem

["David A. Kotz" <dkotz@xxxxxxxxxxxxx>]

Victor,

The first step is to use the -analayze switch to condor_q.  Try using 
this command on the submit node:

  condor_q -analyze 26.0

and also this one (if it works in Windows):

  condor_q -better-analzye 26.0

Those commands should give you some indication of why job 26.0 is not 
starting.

If you get nothing useful from those commands, compare long listings of 
the jobs and the machines:

  condor_q -l 26.0
  condor_status -l dtc-mvill

to see if you can spot incompatibilities between the job's requirements 
and the machine's requirements.

- dave


Víctor Hinojosa wrote:
> i have a condor pool. the summary is the following:
>  
> Name          OpSys       Arch   State      Activity   LoadAv Mem   ActvtyTime
> vm1@dtc-mvill <mailto:vm1@dtc-mvill>  WINNT51     INTEL  Unclaimed  Idle       0.000   508  0+02:08:29
> vm2@dtc-mvill <mailto:vm2@dtc-mvill>  WINNT51     INTEL  Unclaimed  Idle       0.330   508  0+02:08:30
> dtc-vhinojosa WINNT51     INTEL  Unclaimed  Idle       0.000  1015  0+00:08:06
> id-vhinojosa. WINNT51     INTEL  Unclaimed  Idle       0.010   254  0+02:08:09
>                      Machines Owner Claimed Unclaimed Matched Preempting
>        INTEL/WINNT51        4     0       0         4       0          0
>                Total        4     0       0         4       0          0
>  
> i submit a task with condor_submit. i check the status of my job with condor_q command.
>  
> -- Submitter: dtc-vhinojosa : <10.0.1.171:2934> : dtc-vhinojosa
>  ID      OWNER            SUBMITTED     RUN_TIME ST PRI SIZE CMD
>   26.0   Victor          6/1  13:02   0+00:00:00 I  0   0.3  sim_rebounding_DT
>   26.1   Victor          6/1  13:02   0+00:00:00 I  0   0.3  sim_rebounding_DT
>   26.2   Victor          6/1  13:02   0+00:00:00 I  0   0.3  sim_rebounding_DT
>   26.3   Victor          6/1  13:02   0+00:00:00 I  0   0.3  sim_rebounding_DT
>   26.4   Victor          6/1  13:02   0+00:00:00 I  0   0.3  sim_rebounding_DT
>   26.5   Victor          6/1  13:02   0+00:00:00 I  0   0.3  sim_rebounding_DT
>   26.6   Victor          6/1  13:02   0+00:00:00 I  0   0.3  sim_rebounding_DT
>   26.7   Victor          6/1  13:02   0+00:00:00 I  0   0.3  sim_rebounding_DT
>   26.8   Victor          6/1  13:02   0+00:00:00 I  0   0.3  sim_rebounding_DT
>   26.9   Victor          6/1  13:02   0+00:00:00 I  0   0.3  sim_rebounding_DT
> 10 jobs; 10 idle, 0 running, 0 held
>  
> when i install the condor pool i set up all machines with the option "always run Condor jobs".so i don't know what happen. somebody can help me or where i can search the mistake?
>  
> regards,
>  
>  
> victor hinojosa
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Condor-users mailing list
> Condor-users@xxxxxxxxxxx
> https://lists.cs.wisc.edu/mailman/listinfo/condor-users