Re: [Gems-users] setting up 64 processors

[Dan Gibson <degibson@xxxxxxxx>]

Processors are not guaranteed to be numbered contiguously. Rather, they 
are numbered based on board, slot, etc. Are you sure that all 80 are 
present?
Konstantinos Aisopos wrote:
> Hi all,
>
> I am trying to simulate a 64-core CMP system in GEMS and i am setting
> up simics like this:
>
> # set up 64 processors / 4G RAM
> @boards = {0 : [[0, 4, 4096], [1, 4, 0], [2, 4, 0], [3, 4, 0],  [4, 4,
> 0], [5, 4, 0]],
>                   1 : [[0, 4,      0], [1, 4, 0], [2, 4, 0], [3, 4,
> 0],  [4, 4, 0], [5, 4, 0]],
>                   2 : [[0, 4,      0], [1, 4, 0], [2, 4, 0], [3, 4, 0]]}
>
> (6+6+4) times 4 processors should be 64 processors; however, 80
> processors are created, as I find out when booting solaris:
>
> # psrinfo -v
>
> Status of virtual processor 0 as of: 06/02/2002 07:02:39
>   online since 06/02/2002 7:00:36
>   The sparcv9 processor operates at 75MHz,
>      and has a sparkv9 floating point processor.
> Status of virtual processor 1 as of: 06/02/2002 07:02:39
>   online since 06/02/2002 7:00:41
>   The sparcv9 processor operates at 75MHz,
>      and has a sparkv9 floating point processor.
> [..]
> Status of virtual processor 79 as of: 06/02/2002 07:02:39
>   online since 06/02/2002 7:00:42
>   The sparcv9 processor operates at 75MHz,
>      and has a sparkv9 floating point processor.
>
> any ideas what might be wrong?
>
> thanks!
>
>
>
> ---  my sol10-run-64cores.simics file ---
>
> #
> # If you have installed Solaris 10 using the supplied sol10-cd-install-1 and
> # sol10-cd-install-2 scripts, use this script to start a machine.  All
> # user-configuration variables supported by sarek-common can be used
> # with this file as well.
> #
>
> # set up 64 processors / 4G RAM
> @boards =  {0 : [[0, 4, 4096], [1, 4, 0], [2, 4, 0], [3, 4, 0],  [4,
> 4, 0], [5, 4, 0]],
>                   1 : [[0, 4,    0], [1, 4, 0], [2, 4, 0], [3, 4, 0],
> [4, 4, 0], [5, 4, 0]],
>                   2 : [[0, 4,    0], [1, 4, 0], [2, 4, 0], [3, 4, 0]]}
>
>
> # do auto-login per default
> @if not "do_login" in dir():
>         do_login = 1
>
> @sarek_disk_size = 8513945600L
> @sarek_files = [["/blablabla/simics/abisko-sol10-install.disk", "ro",
> 0, 8513945600L]]
>
> # the rest is common for all sarek machines
> run-command-file "sarek-common.simics"
>
> # override some default values, if needed
> # -v for verbose boot, -rv for reconfigured hardware boot
> # system.set-prom-env "boot-command" "boot disk -v"
> system.set-prom-env "boot-command" "boot disk -rv"
> _______________________________________________
> Gems-users mailing list
> Gems-users@xxxxxxxxxxx
> https://lists.cs.wisc.edu/mailman/listinfo/gems-users
> Use Google to search the GEMS Users mailing list by adding "site:https://lists.cs.wisc.edu/archive/gems-users/"; to your search.
>
>
>   
--
http://www.cs.wisc.edu/~gibson [esc]:wq!