Re: [HTCondor-users] Master Daemon - can't find address

[Andrew Mole <Andrew.Mole@xxxxxxxx>]

Hmmm... I didn't add anything to the output before posting it. That would be embarrassing if it was just a misplaced comment in the config file (which is what it now appears to be). I will check it when I get back into the office on Monday.

Thank you very much for spotting this.

Andrew

On 1 Nov, 2013, at 9:26 AM, "Ziliang Guo" <ziliang@xxxxxxxxxxx> wrote:

> Uh, is your daemon list entry actually:
> 
> DAEMON_LIST = MASTER SCHEDD STARTD KBDD - should already be set correctly
> 
> or is the extra - should already be set correctly something you added
> as a comment after the fact?
> 
> On Thu, Oct 31, 2013 at 8:09 PM, Andrew Mole <Andrew.Mole@xxxxxxxx> wrote:
>> To repeat / restate my question, is there anything in the Windows
>> installation that makes settings that cannot be fixed by making changes to
>> the config files? The IT people who installed Condor on a colleague's
>> computer did so without following the instructions I gave them for setting
>> it up to be a submit and execute node. I then made changes to the config
>> files so that it would be the same as other machines in our pool, but it
>> does not seem to start the services to announce it as an execute node, and
>> when I try to submit a job from it, it complains about not being able to see
>> its own address (see my previous emails for details).
>> 
>> Do I need to make changes to the registry, or some other location other than
>> the config files?
>> 
>> Any guidance that anyone can provide would be much appreciated.
>> 
>> Andrew
>> 
>> On 30 Oct, 2013, at 3:21 PM, "Andrew Mole" <Andrew.Mole@xxxxxxxx> wrote:
>> 
>> Hi Ben, Ziliang,
>> 
>> 
>> 
>> Any feedback on this? It is still causing me problems.
>> 
>> 
>> 
>> Andrew
>> 
>> 
>> 
>> From: HTCondor-users [mailto:htcondor-users-bounces@xxxxxxxxxxx] On Behalf
>> Of Andrew Mole
>> Sent: Monday, October 28, 2013 11:24 AM
>> To: HTCondor-Users Mail List
>> Subject: Re: [HTCondor-users] Master Daemon - can't find address
>> 
>> 
>> 
>> Here it is… Sorry about the delay in responding – I was in Nepal with no
>> access to internet…
>> 
>> 
>> 
>> 
>> 
>> CPUIDLE = ($(NonCondorLoadAvg) <= $(BackgroundLoad))
>> 
>> CREAM_GAHP = $(SBIN)/cream_gahp
>> 
>> CRED_MIN_TIME_LEFT = 120
>> 
>> CRED_STORE_DIR = $(LOCAL_DIR)/cred_dir
>> 
>> CREDD = $(SBIN)/condor_credd.exe
>> 
>> CREDD_ADDRESS_FILE = $(LOG)/.credd_address
>> 
>> CREDD_ARGS = -p $(CREDD_PORT) -f
>> 
>> CREDD_CACHE_LOCALLY = True
>> 
>> CREDD_DEBUG = D_FULLDEBUG
>> 
>> CREDD_HOST = HKGSTR195.asset.general.firm.com
>> 
>> CREDD_LOG = $(LOG)/CredLog
>> 
>> CREDD_PORT = 9620
>> 
>> DAEMON_LIST = MASTER SCHEDD STARTD KBDD - should already be set correctly
>> 
>> DBMSD = $(SBIN)/condor_dbmsd.exe
>> 
>> DBMSD_ARGS = -f
>> 
>> DBMSD_LOG = $(LOG)/DbmsdLog
>> 
>> DEFRAG = $(LIBEXEC)/condor_defrag.exe
>> 
>> DELTACLOUD_GAHP = $(SBIN)/deltacloud_gahp
>> 
>> DETECTED_CORES = 8
>> 
>> DETECTED_MEMORY = 32727
>> 
>> EC2_GAHP = $(SBIN)/ec2_gahp
>> 
>> EC2_GAHP_LOG = /tmp/EC2GahpLog.$(USERNAME)
>> 
>> ENABLE_ADDRESS_REWRITING = true
>> 
>> ENABLE_PERSISTENT_CONFIG = false
>> 
>> ENABLE_RUNTIME_CONFIG = false
>> 
>> EXECUTE = $(LOCAL_DIR)/execute
>> 
>> FILESYSTEM_DOMAIN = $(UID_DOMAIN)
>> 
>> FILETRANSFER_PLUGINS = $(LIBEXEC)/curl_plugin, $(LIBEXEC)/data_plugin
>> 
>> FLOCK_COLLECTOR_HOSTS = $(FLOCK_TO)
>> 
>> FLOCK_FROM =
>> 
>> FLOCK_NEGOTIATOR_HOSTS = $(FLOCK_TO)
>> 
>> FLOCK_TO =
>> 
>> FULL_HOSTNAME = PC2349.asset.general.firm.com
>> 
>> GLITE_LOCATION = $(LIBEXEC)/glite
>> 
>> GRID_MONITOR = $(SBIN)/grid_monitor
>> 
>> GRIDMANAGER = $(SBIN)/condor_gridmanager.exe
>> 
>> GRIDMANAGER_DEBUG =
>> 
>> GRIDMANAGER_JOB_PROBE_INTERVAL = 300
>> 
>> GRIDMANAGER_LOCK = $(LOCK)/GridmanagerLock.$(USERNAME)
>> 
>> GRIDMANAGER_LOG = $(LOG)/GridmanagerLog.$(USERNAME)
>> 
>> GRIDMANAGER_MAX_JOBMANAGERS_PER_RESOURCE = 10
>> 
>> GRIDMANAGER_MAX_SUBMITTED_JOBS_PER_RESOURCE_EC2 = 20
>> 
>> GT2_GAHP = $(SBIN)/gahp_server
>> 
>> HAD_DEBUG =
>> 
>> HAD_LOG = $(LOG)/HADLog
>> 
>> HDFS = $(SBIN)/condor_hdfs.exe
>> 
>> HDFS_BACKUPNODE = hdfs://example.com:50100
>> 
>> HDFS_BACKUPNODE_WEB = example.com:50105
>> 
>> HDFS_DATANODE_DIR = /scratch/tmp/hadoop_data
>> 
>> HDFS_DEBUG =
>> 
>> HDFS_LOG = $(LOG)/HDFSLog
>> 
>> HDFS_NAMENODE = hdfs://example.com:9000
>> 
>> HDFS_NAMENODE_DIR = /tmp/hadoop_name
>> 
>> HDFS_NAMENODE_ROLE = ACTIVE
>> 
>> HDFS_NAMENODE_WEB = example.com:8000
>> 
>> HDFS_NODETYPE = HDFS_DATANODE
>> 
>> HIGHLOAD = 0.5
>> 
>> HISTORY = $(SPOOL)/history
>> 
>> HOSTNAME = PC2349
>> 
>> HOUR = (60 * $(MINUTE))
>> 
>> INCLUDE = $(RELEASE_DIR)/include
>> 
>> INVALID_LOG_FILES = core
>> 
>> IP_ADDRESS = 10.218.22.349
>> 
>> ISMPI = (TARGET.JobUniverse == $(MPI))
>> 
>> ISSTANDARD = (TARGET.JobUniverse == $(STANDARD))
>> 
>> ISVANILLA = (TARGET.JobUniverse == $(VANILLA))
>> 
>> ISVM = (TARGET.JobUniverse == $(VM))
>> 
>> JAVA = C:\PROGRA~2\Java\jre6\bin\java.exe
>> 
>> JAVA_BENCHMARK_TIME = 2
>> 
>> JAVA_CLASSPATH_ARGUMENT = -classpath
>> 
>> JAVA_CLASSPATH_DEFAULT = $(BIN) $(BIN)/scimark2lib.jar .
>> 
>> JAVA_CLASSPATH_SEPARATOR = :
>> 
>> JAVA_EXTRA_ARGUMENTS =
>> 
>> JOB_RENICE_INCREMENT = 10
>> 
>> JOB_ROUTER = $(LIBEXEC)/condor_job_router.exe
>> 
>> JOB_ROUTER_DEBUG =
>> 
>> JOB_ROUTER_LOG = $(LOG)/JobRouterLog
>> 
>> JUSTCPU = ($(CPUBusy) && ($(KeyboardBusy) == False))
>> 
>> KBDD = $(SBIN)/condor_kbdd.exe
>> 
>> KBDD_ADDRESS_FILE = $(LOG)/.kbdd_address
>> 
>> KBDD_DEBUG =
>> 
>> KBDD_LOG = $(LOG)/KbdLog
>> 
>> KEYBOARDBUSY = (KeyboardIdle < $(MINUTE))
>> 
>> KEYBOARDNOTBUSY = ($(KeyboardBusy) == False)
>> 
>> KILL = $(UWCS_KILL)
>> 
>> LASTCKPT = (time() - LastPeriodicCheckpoint)
>> 
>> LEASEMANAGER = $(SBIN)/condor_lease_manager.exe
>> 
>> LEASEMANAGER.CLASSAD_LOG = $(SPOOL)/LeaseManagerState
>> 
>> LEASEMANAGER.DEBUG_ADS = False
>> 
>> LEASEMANAGER.GETADS_INTERVAL = 60
>> 
>> LEASEMANAGER.PRUNE_INTERVAL = 60
>> 
>> LEASEMANAGER.UPDATE_INTERVAL = 300
>> 
>> LEASEMANAGER_DEBUG = D_FULLDEBUG
>> 
>> LEASEMANAGER_LOG = $(LOG)/LeaseManagerLog
>> 
>> LEASEMANGER_ADDRESS_FILE = $(LOG)/.lease_manager_address
>> 
>> LIB = $(RELEASE_DIR)/lib
>> 
>> LIBEXEC = $(BIN)
>> 
>> LIBVIRT_XML_SCRIPT = $(LIBEXEC)/libvirt_simple_script.awk
>> 
>> LOCAL_CONFIG_DIR = $(LOCAL_DIR)/config
>> 
>> LOCAL_CONFIG_DIR_EXCLUDE_REGEXP =
>> ^((\..*)|(.*~)|(#.*)|(.*\.rpmsave)|(.*\.rpmnew))$
>> 
>> LOCAL_CONFIG_FILE = $(LOCAL_DIR)/condor_config.local
>> 
>> LOCAL_DIR = $(RELEASE_DIR)
>> 
>> LOCK = $(LOG)
>> 
>> LOG = $(LOCAL_DIR)/log
>> 
>> MACHINEBUSY = ($(CPUBusy) || $(KeyboardBusy))
>> 
>> MACHINEMAXVACATETIME = $(MaxVacateTime)
>> 
>> MAIL = $(BIN)/condor_mail.exe
>> 
>> MAIL_FROM =
>> 
>> MASTER = $(SBIN)/condor_master.exe
>> 
>> MASTER_ADDRESS_FILE = $(LOG)/.master_address
>> 
>> MASTER_DEBUG =
>> 
>> MASTER_LOG = $(LOG)/MasterLog
>> 
>> MAX_C_GAHP_LOG = 1000000
>> 
>> MAX_COLLECTOR_LOG = 1000000
>> 
>> MAX_CREDD_LOG = 4000000
>> 
>> MAX_GRIDMANAGER_LOG = 1000000
>> 
>> MAX_HAD_LOG = 1000000
>> 
>> MAX_HDFS_LOG = 1000000
>> 
>> MAX_JOB_ROUTER_LOG = 1000000
>> 
>> MAX_KBDD_LOG = 1000000
>> 
>> MAX_LEASEMANAGER_LOG = 1000000
>> 
>> MAX_MASTER_LOG = 1000000
>> 
>> MAX_NEGOTIATOR_LOG = 1000000
>> 
>> MAX_NEGOTIATOR_MATCH_LOG = 1000000
>> 
>> MAX_REPLICATION_LOG = 1000000
>> 
>> MAX_ROOSTER_LOG = 1000000
>> 
>> MAX_SCHEDD_LOG = 1000000
>> 
>> MAX_SHADOW_LOG = 1000000
>> 
>> MAX_SHARED_PORT_LOG = 1000000
>> 
>> MAX_STARTD_LOG = 1000000
>> 
>> MAX_STARTER_LOG = 1000000
>> 
>> MAX_STORK_LOG = 4000000
>> 
>> MAX_TRANSFERER_LOG = 1000000
>> 
>> MAX_VM_GAHP_LOG = 1000000
>> 
>> MAXJOBRETIREMENTTIME = $(UWCS_MaxJobRetirementTime)
>> 
>> MAXSUSPENDTIME = 10 * $(MINUTE)
>> 
>> MAXVACATETIME = 10 * $(MINUTE)
>> 
>> MEDIUMJOB = (TARGET.ImageSize >= (15 * 1024) && TARGET.ImageSize < (50 *
>> 1024))
>> 
>> MINUTE = 60
>> 
>> MPI = 8
>> 
>> NEGOTIATOR = $(SBIN)/condor_negotiator.exe
>> 
>> NEGOTIATOR_DEBUG = D_MATCH
>> 
>> NEGOTIATOR_LOG = $(LOG)/NegotiatorLog
>> 
>> NEGOTIATOR_MATCH_LOG = $(LOG)/MatchLog
>> 
>> NEGOTIATOR_POST_JOB_RANK = $(UWCS_NEGOTIATOR_POST_JOB_RANK)
>> 
>> NEGOTIATOR_PRE_JOB_RANK = $(UWCS_NEGOTIATOR_PRE_JOB_RANK)
>> 
>> NO_DNS = false
>> 
>> NONCONDORLOADAVG = (LoadAvg - CondorLoadAvg)
>> 
>> NORDUGRID_GAHP = $(SBIN)/nordugrid_gahp
>> 
>> OASYSGSA = "8.6"
>> 
>> OPSYS = WINDOWS
>> 
>> OPSYSANDVER = WINDOWS601
>> 
>> OPSYSLEGACY = WINNT61
>> 
>> OPSYSLONGNAME = Windows 7 SP1
>> 
>> OPSYSMAJORVER = 601
>> 
>> OPSYSNAME = Windows7
>> 
>> OPSYSSHORTNAME = Win7
>> 
>> OPSYSVER = 601
>> 
>> PERIODIC_CHECKPOINT = $(UWCS_PERIODIC_CHECKPOINT)
>> 
>> PID = 7892
>> 
>> PPID = 4816
>> 
>> PREEMPT = FALSE
>> 
>> PREEMPTION_RANK = $(UWCS_PREEMPTION_RANK)
>> 
>> PREEMPTION_REQUIREMENTS = $(UWCS_PREEMPTION_REQUIREMENTS)
>> 
>> PREEN = $(SBIN)/condor_preen.exe
>> 
>> PREEN_ARGS = -m -r
>> 
>> PROCD = $(SBIN)/condor_procd.exe
>> 
>> PROCD_ADDRESS = \\.\pipe\condor_procd_pipe
>> 
>> PROCD_LOG = $(LOG)/ProcLog
>> 
>> PROCD_MAX_SNAPSHOT_INTERVAL = 60
>> 
>> QUEUE_SUPER_USERS = condor, SYSTEM
>> 
>> QUILL = $(SBIN)/condor_quill.exe
>> 
>> QUILL_ADDRESS_FILE = $(LOG)/.quill_address
>> 
>> QUILL_LOG = $(LOG)/QuillLog
>> 
>> REAL_GID = 666
>> 
>> REAL_UID = 666
>> 
>> RELEASE_DIR = D:\condor
>> 
>> REPLICATION_DEBUG =
>> 
>> REPLICATION_LOG = $(LOG)/ReplicationLog
>> 
>> REQUIRE_LOCAL_CONFIG_FILE = FALSE
>> 
>> RESERVED_DISK = 5
>> 
>> ROOSTER = $(LIBEXEC)/condor_rooster.exe
>> 
>> ROOSTER_DEBUG =
>> 
>> ROOSTER_LOG = $(LOG)/RoosterLog
>> 
>> RUNBENCHMARKS = (LastBenchmark == 0 ) || ($(BenchmarkTimer) >= (4 *
>> $(HOUR)))
>> 
>> SBIN = $(BIN)
>> 
>> SCHEDD = $(SBIN)/condor_schedd.exe
>> 
>> SCHEDD_ADDRESS_FILE = $(SPOOL)/.schedd_address
>> 
>> SCHEDD_DAEMON_AD_FILE = $(SPOOL)/.schedd_classad
>> 
>> SCHEDD_DEBUG = D_PID
>> 
>> SCHEDD_LOG = $(LOG)/SchedLog
>> 
>> SEC_CLIENT_AUTHENTICATION_METHODS = NTSSPI, PASSWORD
>> 
>> SEC_CONFIG_AUTHENTICATION = REQUIRED
>> 
>> SEC_CONFIG_ENCRYPTION = REQUIRED
>> 
>> SEC_CONFIG_INTEGRITY = REQUIRED
>> 
>> SEC_CONFIG_NEGOTIATION = REQUIRED
>> 
>> SHADOW = $(SBIN)/condor_shadow.exe
>> 
>> SHADOW_DEBUG =
>> 
>> SHADOW_LIST = SHADOW
>> 
>> SHADOW_LOCK = $(LOCK)/ShadowLock
>> 
>> SHADOW_LOG = $(LOG)/ShadowLog
>> 
>> SHADOW_STANDARD = $(SBIN)/condor_shadow.std.exe
>> 
>> SHARED_PORT = $(LIBEXEC)/condor_shared_port.exe
>> 
>> SHARED_PORT_DEBUG =
>> 
>> SHARED_PORT_LOG = $(LOG)/SharedPortLog
>> 
>> SMALLJOB = (TARGET.ImageSize <  (15 * 1024))
>> 
>> SMTP_SERVER =
>> 
>> SPOOL = $(LOCAL_DIR)/spool
>> 
>> STANDARD = 1
>> 
>> START = TRUE
>> 
>> STARTD = $(SBIN)/condor_startd.exe
>> 
>> STARTD_ADDRESS_FILE = $(LOG)/.startd_address
>> 
>> STARTD_ATTRS = COLLECTOR_HOST_STRING, OasysGSA
>> 
>> STARTD_DEBUG =
>> 
>> STARTD_JOB_EXPRS = ImageSize, ExecutableSize, JobUniverse, NiceUser
>> 
>> STARTD_LOG = $(LOG)/StartLog
>> 
>> STARTER = $(SBIN)/condor_starter.exe
>> 
>> STARTER_ALLOW_RUNAS_OWNER = True
>> 
>> STARTER_LIST = STARTER
>> 
>> STARTER_LOCAL = $(SBIN)/condor_starter.exe
>> 
>> STARTER_LOG = $(LOG)/StarterLog
>> 
>> STARTER_STANDARD = $(SBIN)/condor_starter.std.exe
>> 
>> STARTIDLETIME = 15 * $(MINUTE)
>> 
>> STATETIMER = (time() - EnteredCurrentState)
>> 
>> STORK = $(SBIN)/stork_server
>> 
>> STORK_ADDRESS_FILE = $(LOG)/.stork_address
>> 
>> STORK_ARGS = -p $(STORK_PORT) -f -Serverlog $(STORK_LOG_BASE)
>> 
>> STORK_DEBUG = D_FULLDEBUG
>> 
>> STORK_LOG = $(LOG)/StorkLog
>> 
>> STORK_LOG_BASE = $(LOG)/Stork
>> 
>> STORK_PORT = 9621
>> 
>> SUBSYSTEM = TOOL
>> 
>> SUSPEND = FALSE
>> 
>> TESTINGMODE_CLAIM_WORKLIFE = 1200
>> 
>> TESTINGMODE_CONTINUE = True
>> 
>> TESTINGMODE_KILL = False
>> 
>> TESTINGMODE_PERIODIC_CHECKPOINT = False
>> 
>> TESTINGMODE_PREEMPT = False
>> 
>> TESTINGMODE_PREEMPTION_RANK = 0
>> 
>> TESTINGMODE_PREEMPTION_REQUIREMENTS = False
>> 
>> TESTINGMODE_START = True
>> 
>> TESTINGMODE_SUSPEND = False
>> 
>> TESTINGMODE_WANT_SUSPEND = False
>> 
>> TESTINGMODE_WANT_VACATE = False
>> 
>> TRANSFERER = $(LIBEXEC)/condor_transferer.exe
>> 
>> TRANSFERER_DEBUG =
>> 
>> TRANSFERER_LOG = $(LOG)/TransfererLog
>> 
>> UID_DOMAIN = firm.com
>> 
>> UNAME_ARCH = X86_64
>> 
>> UNAME_OPSYS = WINDOWS
>> 
>> UNICORE_GAHP = $(SBIN)/unicore_gahp
>> 
>> USERNAME = thomas.chandler
>> 
>> UWCS_CONTINUE = ( $(CPUIdle) && ($(ActivityTimer) > 10) && (KeyboardIdle >
>> $(ContinueIdleTime)) )
>> 
>> UWCS_KILL = false
>> 
>> UWCS_MAXJOBRETIREMENTTIME = 0
>> 
>> UWCS_NEGOTIATOR_POST_JOB_RANK = (RemoteOwner =?= UNDEFINED) * (KFlops -
>> SlotID - 1.0e10*(Offline=?=True))
>> 
>> UWCS_NEGOTIATOR_PRE_JOB_RANK = RemoteOwner =?= UNDEFINED
>> 
>> UWCS_PERIODIC_CHECKPOINT = $(LastCkpt) > (3 * $(HOUR) +
>> $RANDOM_INTEGER(-30,30,1) * $(MINUTE) )
>> 
>> UWCS_PREEMPT = ( ((Activity == "Suspended") && ($(ActivityTimer) >
>> $(MaxSuspendTime))) || (SUSPEND && (WANT_SUSPEND == False)) )
>> 
>> UWCS_PREEMPTION_RANK = (RemoteUserPrio * 1000000) - TARGET.ImageSize
>> 
>> UWCS_PREEMPTION_REQUIREMENTS = ((SubmitterGroup =?= RemoteGroup) &&
>> ($(StateTimer) > (1 * $(HOUR))) && (RemoteUserPrio >
>> TARGET.SubmitterUserPrio * 1.2)) || (MY.NiceUser == True)
>> 
>> UWCS_START = ( (KeyboardIdle > $(StartIdleTime)) && ( $(CPUIdle) || (State
>> != "Unclaimed" && State != "Owner")) )
>> 
>> UWCS_SUSPEND = ( $(KeyboardBusy) || ( (CpuBusyTime > 2 * $(MINUTE)) &&
>> $(ActivationTimer) > 90 ) )
>> 
>> UWCS_WANT_SUSPEND = ( $(SmallJob) || $(KeyboardNotBusy) || $(IsVanilla) ) &&
>> ( $(SUSPEND) )
>> 
>> UWCS_WANT_VACATE = ( $(ActivationTimer) > 10 * $(MINUTE) || $(IsVanilla) )
>> 
>> VALID_SPOOL_FILES = job_queue.log, job_queue.log.tmp, history,
>> Accountant.log, Accountantnew.log, local_univ_execute, .quillwritepassword,
>> .pgpass, .schedd_address, .schedd_classad
>> 
>> VANILLA = 5
>> 
>> VM = 13
>> 
>> VM_GAHP_LOG = NUL
>> 
>> VM_GAHP_SERVER = $(SBIN)/condor_vm-gahp.exe
>> 
>> VM_MAX_NUMBER = $(NUM_CPUS)
>> 
>> VM_MEMORY = 128
>> 
>> VM_NETWORKING = FALSE
>> 
>> VM_NETWORKING_DEFAULT_TYPE = nat
>> 
>> VM_NETWORKING_TYPE = nat
>> 
>> VM_TYPE =
>> 
>> VMWARE_BRIDGE_NETWORKING_TYPE = bridged
>> 
>> VMWARE_LOCAL_SETTINGS_FILE = $(RELEASE_DIR)/condor_vmware_local_settings
>> 
>> VMWARE_NAT_NETWORKING_TYPE = nat
>> 
>> VMWARE_NETWORKING_TYPE = nat
>> 
>> VMWARE_PERL = perl
>> 
>> VMWARE_SCRIPT = $(SBIN)/condor_vm_vmware.exe
>> 
>> WANT_SUSPEND = TRUE
>> 
>> WANT_VACATE = FALSE
>> 
>> WINDOWS_RMDIR = $(SBIN)\condor_rmdir.exe
>> 
>> WINDOWS_SOFTKILL = $(SBIN)/condor_softkill.exe
>> 
>> 
>> 
>> C:\>
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> From: HTCondor-users [mailto:htcondor-users-bounces@xxxxxxxxxxx] On Behalf
>> Of Ben Cotton
>> Sent: 19 October 2013 09:37
>> To: HTCondor-Users Mail List
>> Subject: Re: [HTCondor-users] Master Daemon - can't find address
>> 
>> 
>> 
>> 
>> 
>> On Fri, Oct 18, 2013 at 9:33 PM, Andrew Mole <Andrew.Mole@xxxxxxxx> wrote:
>> 
>> Does anyone have any insight on this?
>> 
>> 
>> 
>> Can you share the output of `condor_config_val -dump` on that machine?
>> 
>> 
>> 
>> --
>> 
>> Ben Cotton
>> Senior Support Engineer
>> Cycle Computing, LLC
>> The Leader in Utility Supercomputing and Cloud HPC Software
>> 
>> ____________________________________________________________
>> Electronic mail messages entering and leaving Arup  business
>> systems are scanned for acceptability of content and viruses
>> 
>> _______________________________________________
>> 
>> HTCondor-users mailing list
>> To unsubscribe, send a message to htcondor-users-request@xxxxxxxxxxx with a
>> subject: Unsubscribe
>> You can also unsubscribe by visiting
>> https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users
>> 
>> The archives can be found at:
>> https://lists.cs.wisc.edu/archive/htcondor-users/
>> 
>> 
>> _______________________________________________
>> HTCondor-users mailing list
>> To unsubscribe, send a message to htcondor-users-request@xxxxxxxxxxx with a
>> subject: Unsubscribe
>> You can also unsubscribe by visiting
>> https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users
>> 
>> The archives can be found at:
>> https://lists.cs.wisc.edu/archive/htcondor-users/
> 
> 
> 
> -- 
> HTCondor Project Windows Developer / NEOS Maintainer
> 
> _______________________________________________
> HTCondor-users mailing list
> To unsubscribe, send a message to htcondor-users-request@xxxxxxxxxxx with a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users
> 
> The archives can be found at:
> https://lists.cs.wisc.edu/archive/htcondor-users/