Re: [HTCondor-users] Need help on howto run simutlations with batch files, thanks.

[kschwarz@xxxxxxxxxxxxxx]

Hi Tony,

The $(PROCESS) refers to the ProcessID
that starts with 0 (zero) so your first case filename must be PA_Sample0.INP,
the second must be PA_Sample1,INP and so on.

Att.,
Klaus

From:	Tony H <tonyw8@xxxxxxxxx>
To:	Stub <spamrefuse@xxxxxxxxx>, HTCondor-Users Mail List <htcondor-users@xxxxxxxxxxx>,
Date:	08/11/2013 14:37
Subject:	Re: [HTCondor-users] Need help on howto run simutlations with batch files, thanks.
Sent by:	"HTCondor-users" <htcondor-users-bounces@xxxxxxxxxxx>

---

Hi Stub,

thanks for the response, C:\temp>condor_submit job.sub
Submitting job(s)
ERROR: Can't open "c:\temp\case\PA_Sample0.INP"  with flags
00 (No such file
 or directory)
it's stucked by looking from file 0.
so my inp and inc file start with sample1.INP and sample1.inc.

looks like all process from number 0.  is there any way like use
$(process+1) option.? so it can read from sampe1. file,then to
sample1000.
=========================================

simulator.exe PA_Sample1.INP PA_R02.par
simulator.exe PA_Sample2.INP PA_R02.par
simulator.exe PA_Sample3.INP PA_R02.par
simulator.exe PA_Sample4.INP PA_R02.par
................

simulator.exe PA_Sample1000.INP PA_R02.par

any suggestions?

thank you.
tony

On Fri, Nov 8, 2013 at 8:32 AM, Stub <spamrefuse@xxxxxxxxx> wrote:
> How about just sending the 1000 jobs, like this:
>
> # Note that the counting of $(PROCESS) starts with zero and ends with
999!
> executable = simulator.exe
> arguments  = PA_Sample$(PROCESS).INP PA_R02.par
>
> should_transfer_files = YES
> transfer_input_files  = case$(PROCESS)/PA_Sample$(PROCESS).INP,
case$(PROCESS)/PA_R02.par
> when_to_transfer_output = ON_EXIT
>
> output = case$(PROCESS)/Sample$(PROCESS).out
> log    = case$(PROCESS)/Sample$(PROCESS).log
>
> Queue 1000
>
> ##################################################
>
> Maybe that could work?
>
> R.
>
>
>
> On Friday, November 8, 2013 12:26 AM, tony <tonyw8@xxxxxxxxx>
wrote:
> my run1.bat file is
>
> simulator.exe PA_Sample1.INP PA_R02.par
> simulator.exe PA_Sample2.INP PA_R02.par
> simulator.exe PA_Sample3.INP PA_R02.par
> simulator.exe PA_Sample4.INP PA_R02.par
> simulator.exe PA_Sample5.INP PA_R02.par
>
>
> my run2.bat is simulator.exe PA_Sample1.INP PA_R02.par
> =================
> simulator.exe PA_Sample6.INP PA_R02.par
> simulator.exe PA_Sample7.INP PA_R02.par
> simulator.exe PA_Sample8.INP PA_R02.par
> simulator.exe PA_Sample9.INP PA_R02.par
> simulator.exe PA_Sample10.INP PA_R02.par
>
> etc with runx.bat x means numbers.
>
> simulator.exe PA_Sample996.INP PA_R02.par
> simulator.exe PA_Sample997.INP PA_R02.par
> simulator.exe PA_Sample998.INP PA_R02.par
> simulator.exe PA_Sample999.INP PA_R02.par
> simulator.exe PA_Sample1000.INP PA_R02.par
> =================
> when I run this,I will get result sample1-sample1000.log,sample1-samples1000.sum
>
> i put each run with necessary files to case1/case2/case3/..../case200.i
feel
> like it's stupid way.I believe easiest way is put all files to a folder.then
> load it from there according to runx.bat file. but I don't know how.
>
> Would you please share your experience to setup the simulation
> jobs?
>
> I would like to put all files to a folder,then send each runx.bat
to job
> queue to do the run,and I need to transfer output back to a subfolder
back
>
> Thank you.much appreciated.
>
>
> _______________________________________________
> HTCondor-users mailing list
> To unsubscribe, send a message to htcondor-users-request@xxxxxxxxxxx
with a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users
>
> The archives can be found at:
> https://lists.cs.wisc.edu/archive/htcondor-users/
>
>
> _______________________________________________
> HTCondor-users mailing list
> To unsubscribe, send a message to htcondor-users-request@xxxxxxxxxxx
with a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users
>
> The archives can be found at:
> https://lists.cs.wisc.edu/archive/htcondor-users/
_______________________________________________
HTCondor-users mailing list
To unsubscribe, send a message to htcondor-users-request@xxxxxxxxxxx with
a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/htcondor-users

The archives can be found at:
https://lists.cs.wisc.edu/archive/htcondor-users/

---

This message is intended solely for the
use of its addressee and may contain privileged or confidential information.
All information contained herein shall be treated as confidential and shall
not be disclosed to any third party without Embraer’s prior written approval.
If you are not the addressee you should not distribute, copy or file this
message. In this case, please notify the sender and destroy its contents
immediately.
Esta mensagem é para uso exclusivo de seu destinatário e pode conter informações
privilegiadas e confidenciais. Todas as informações aqui contidas devem
ser tratadas como confidenciais e não devem ser divulgadas a terceiros
sem o prévio consentimento por escrito da Embraer. Se você não é o destinatário
não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor,
notifique o remetente da mesma e destrua imediatamente a mensagem.