Re: [Condor-users] Getting started with 2 nodes

[Brian Candler <B.Candler@xxxxxxxxx>]

On Tue, Jun 12, 2012 at 04:32:20PM +0000, Rich Pieri wrote:
> On Jun 12, 2012, at 5:51 AM, Brian Candler wrote:
> > 06/11/12 17:33:45 PERMISSION DENIED to unauthenticated@unmapped from host 10.0.1.2 for command 0 (UPDATE_STARTD_AD), access level ADVERTISE_STARTD: reason: cached result for ADVERTISE_STARTD; see first case for the full reason
> [snip]
> >    -- Submitter: dev-storage1.example.com : <10.0.1.1:50852> : dev-storage1.example.com
> 
> 
> You wrote that the IP address for the nodes are 10.26.1.224 and .226 but
> the logs and condor_q output show 10.0.1.1 and .2.  This may not be a
> Condor issue.  Recheck your network and firewall settings.  Check
> connectivity between nodes in both directions.  Make sure that you have
> the correct IP addresses in your DNS or hosts files.

OK, I will come clean :-)

There is a 10G point-to-point link between the two nodes as well. The ends
are numbered as 10.0.1.1 and 10.0.1.2

/etc/hosts has:

10.0.1.1    dev-storage1
10.0.1.2    dev-storage2
10.26.1.224 dev-storage1.example.com
10.26.1.226 dev-storage2.example.com

The nodes have dev-storage[12].example.com in /etc/hostname, and
CONDOR_HOST = dev-storage1.example.com
in condor_config.local, so I was hoping they'd talk to each other on their
10.26.1 addresses and be unaware of the point-to-point link.

Regards,

Brian.