[Condor-users] SafeSock::my_ip_str() failed to connect, errno = 10065

[kschwarz@xxxxxxxxxxxxxx]

We are using Condor v7.6.6 on Windows desktops.

On 02/23/12, around 02:30, there happened
an network problem and the machines that were powered on, got a new IP
address, but Condor continues to try to communicate using the old IP address.
The message that appears in the MasterLog
is:

...
02/18/12 23:04:38 DaemonCore: command socket
at <10.4.32.162:45225>
02/18/12 23:04:38 DaemonCore: private command
socket at <10.4.32.162:45225>
...
02/22/12 00:04:38 Preen pid is 3580
02/23/12 00:04:38 Preen pid is 4696
02/23/12 02:30:18 SafeSock::my_ip_str() failed
to connect, errno = 10065
02/23/12 02:30:18 SafeSock::my_ip_str() failed
to connect, errno = 10065
02/23/12 02:30:18 sendMsg:sendto failed -
errno: 0
02/23/12 02:30:18 Failed to send non-blocking
update to <10.13.5.24:9618>.
...

The new IP address is 

Reply from 10.4.32.89: bytes=32 time=2ms
TTL=125

Is there any way to configure Condor to self
recover from this issue?

Thanks,
Klaus

---

This message is intended solely for the
use of its addressee and may contain privileged or confidential information.
All information contained herein shall be treated as confidential and shall
not be disclosed to any third party without Embraer’s prior written approval.
If you are not the addressee you should not distribute, copy or file this
message. In this case, please notify the sender and destroy its contents
immediately.
Esta mensagem é para uso exclusivo de seu destinatário e pode conter informações
privilegiadas e confidenciais. Todas as informações aqui contidas devem
ser tratadas como confidenciais e não devem ser divulgadas a terceiros
sem o prévio consentimento por escrito da Embraer. Se você não é o destinatário
não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor,
notifique o remetente da mesma e destrua imediatamente a mensagem.