THAT´S A GOOD QUESTION!
> From: Akinola.Oke@xxxxxxxxxxxx > To: condor-users@xxxxxxxxxxx > Date: Fri, 9 Dec 2011 14:02:51 +0100 > Subject: Re: [Condor-users] Problem running 7.6.4 on Windows OS > > Thanks it works. > > Is there any possible to define that the process should run on a specific node (Host)? > > ---------------------------------------------------------------------------- > > > -----Original Message----- > From: Matthew Farrellee [mailto:matt@xxxxxxxxxx] > Sent: Donnerstag, 8. Dezember 2011 13:57 > To: Condor-Users Mail List > Cc: Oke Akinola LT > Subject: Re: [Condor-users] Problem running 7.6.4 on Windows OS > > > The VirtualMachineID attribute is now called SlotID. > > Best, > > > matt > > On 12/08/2011 03:18 AM, Oke Akinola LT wrote: > > I get the following from condor_q -better with my test sub files: > > subfiel1: > > --- > > --- > > 002.000: Run analysis summary. Of 1 machines, > > 1 are rejected by your job's requirements > > 0 reject your job because of their own requirements > > 0 match but are serving users with a better priority in the pool 0 > > match but reject the job for unknown reasons 0 match but will not > > currently preempt their existing job 0 match but are currently offline > > 0 are available to run your job > > No successful match recorded. > > Last failed match: Thu Dec 08 08:48:36 2011 > > Reason for last match failure: no match found > > WARNING: Be advised: > > No resources matched request's constraints > > The Requirements _expression_ for your job is: > > ( ( target.OpSys == "WINNT51" || target.OpSys == "WINNT52" ) && > > ( target.VirtualMachineID == 1 ) ) && ( TARGET.Arch == "INTEL" ) && > > ( TARGET.Disk >= DiskUsage ) && ( ( TARGET.Memory * 1024 ) >= ImageSize ) && > > ( ( RequestMemory * 1024 ) >= ImageSize ) && ( TARGET.HasFileTransfer ) > > Condition Machines Matched Suggestion > > --------- ---------------- ---------- > > 1 ( target.VirtualMachineID == 1 ) 0 REMOVE > > 2 ( target.OpSys == "WINNT51" || target.OpSys == "WINNT52" ) > > 1 > > 3 ( TARGET.Arch == "INTEL" ) 1 > > 4 ( TARGET.Disk >= 1 ) 1 > > 5 ( ( 1024 * TARGET.Memory ) >= 1 ) 1 > > 6 ( ( 1024 * ceiling(ifThenElse(JobVMMemory isnt > > undefined,JobVMMemory,9.765625000000000E-004)) ) >= 1 ) > > 1 > > 7 ( TARGET.HasFileTransfer ) 1 > > Subfile2: > > --- > > 006.000: Run analysis summary. Of 1 machines, > > 1 are rejected by your job's requirements > > 0 reject your job because of their own requirements > > 0 match but are serving users with a better priority in the pool > > 0 match but reject the job for unknown reasons > > 0 match but will not currently preempt their existing job > > 0 match but are currently offline > > 0 are available to run your job > > No successful match recorded. > > Last failed match: Thu Dec 08 09:14:07 2011 > > Reason for last match failure: no match found > > WARNING: Be advised: > > No resources matched request's constraints > > The Requirements _expression_ for your job is: > > ( TARGET.Arch == "INTEL" ) && ( TARGET.OpSys == "WINNT51" ) && > > ( TARGET.Disk >= DiskUsage ) && ( ( TARGET.Memory * 1024 ) >= ImageSize ) && > > ( ( RequestMemory * 1024 ) >= ImageSize ) && ( TARGET.HasFileTransfer ) > > Condition Machines Matched Suggestion > > --------- ---------------- ---------- > > 1 ( TARGET.OpSys == "WINNT51" ) 0 MODIFY TO "WINNT52" > > 2 ( TARGET.Arch == "INTEL" ) 1 > > 3 ( TARGET.Disk >= 1 ) 1 > > 4 ( ( 1024 * TARGET.Memory ) >= 1 ) 1 > > 5 ( ( 1024 * ceiling(ifThenElse(JobVMMemory isnt > > undefined,JobVMMemory,9.765625000000000E-004)) ) >= 1 ) > > 1 > > 6 ( TARGET.HasFileTransfer ) 1 > > What should I edit or remove in both cases? > > Thanks > > ---------------------------------------------------------------------------- > > > > -----Original Message----- > > *From:* condor-users-bounces@xxxxxxxxxxx > > [mailto:condor-users-bounces@xxxxxxxxxxx] *On Behalf Of *John (TJ) > > Knoeller > > *Sent:* Donnerstag, 8. Dezember 2011 00:02 > > *To:* condor-users@xxxxxxxxxxx > > *Subject:* Re: [Condor-users] Problem running 7.6.4 on Windows OS > > > > what does *condor_q -better* have to say about why the jobs aren't > > matching? > > > > On 12/7/2011 4:17 PM, Oke Akinola LT wrote: > >> We have condor environment base on version 7.0.1 since about 3 > >> years. I am now trying to rebuild the infrastructure on version > >> 7.6.4. > >> The necessary installation and configuration were done, and > >> available computing nodes are visible on the submitter machine. > >> However when I send a job, they are just in the queue idle while > >> there are free node available. > >> The error message on both Master and submitter is there is "no > >> match found" > >> I have also these entries on the submitter: > >> 12/07/11 22:59:05 (pid:476) TransferQueueManager stats: active > >> up=0/10 down=0/10; waiting up=0 down=0; wait time up=0s down=0s > >> Using version 7.4.4 with the same configuration works fine. > >> What could be the problem with 7.6.4? > >> Thanks > >> > >> > >> _______________________________________________ > >> Condor-users mailing list > >> To unsubscribe, send a message tocondor-users-request@xxxxxxxxxxx with a > >> subject: Unsubscribe > >> You can also unsubscribe by visiting > >> https://lists.cs.wisc.edu/mailman/listinfo/condor-users > >> > >> The archives can be found at: > >> https://lists.cs.wisc.edu/archive/condor-users/ > > > > > > > > _______________________________________________ > > Condor-users mailing list > > To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx > > with a > > subject: Unsubscribe > > You can also unsubscribe by visiting > > https://lists.cs.wisc.edu/mailman/listinfo/condor-users > > > > The archives can be found at: > > https://lists.cs.wisc.edu/archive/condor-users/ > > _______________________________________________ > Condor-users mailing list > To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a > subject: Unsubscribe > You can also unsubscribe by visiting > https://lists.cs.wisc.edu/mailman/listinfo/condor-users > > The archives can be found at: > https://lists.cs.wisc.edu/archive/condor-users/ |