Re: [Condor-users] Problem with HAD :Intercepting an unhandled exception.

["Timothy St. Clair" <tstclair@xxxxxxxxxx>]

If you have MS.Visual Studio.NET you will want to attach with the
debugger, this will likely be the best source of tracking down the
error. 

Just as ?... usually if you want to setup HA the spool is in some shared
location, unless you are intending on setting it up locally for process
redundancy.  Either way, I'm curious what you are trying to accomplish
with this deployment configurations?

Cheers,
Tim

On Mon, 2010-07-19 at 17:38 +1200, kuldeep singh meel wrote:
> hi Ben
> The master log output is :
> 07/19 17:35:52 Using config source: C:\condor\condor_config
> 07/19 17:35:52 Using local config sources: 
> 07/19 17:35:52    C:\condor/condor_config.local
> 07/19 17:35:52 DaemonCore: Command Socket at <10.1.1.108:50637>
> 07/19 17:35:52 Will use UDP to update collector <10.1.1.108:9618>
> 07/19 17:35:52 Will use UDP to update collector <10.1.1.104:9618>
> 07/19 17:35:52 Created HA lock for SCHEDD; URL='file:/C:/condor/spool'
> poll=300s hold=3600s
> 07/19 17:35:52 Daemon NEGOTIATOR is controlled by HAD
> 07/19 17:35:52 Intercepting an unhandled exception.
> 07/19 17:35:52 Dropping a core file.
> 
> 
> and core file says:
> PID: 2632
> Exception code: C0000005 ACCESS_VIOLATION
> Fault address:  0043E361 01:0003D361 C:\condor\bin\condor_master.exe
> 
> 
> Registers:
> EAX:0051C0F0
> EBX:00000000
> ECX:00000000
> EDX:00CBBCA8
> ESI:00E79F40
> EDI:00000400
> CS:EIP:0023:0043E361
> SS:ESP:002B:015DFE60  EBP:00000000
> DS:002B  ES:002B  FS:0053  GS:002B
> Flags:00010202
> 
> 
> Call stack:
> Address   Frame
> 
> 
> 
> 
> Kuldeep Singh Meel
> Sophomore
> Department of Computer Science and Engineering
> www.cse.iitb.ac.in/~kuldeepmeel
> My Blog : http://sweetwithchilli.blogspot.com/
> 
> 
> On Mon, Jul 19, 2010 at 5:29 PM, Burnett, Ben <ben.burnett@xxxxxxxx>
> wrote:
>         What do the master logs say when the debug level is turn on
>         full?  Also, check the core after you run it again, often
>         there is a stack-trace included in the tail end of the file.
>         
>         -B
>         
>         
>         On 2010-07-18, at 10:42 PM, kuldeep singh meel wrote:
>         
>         > Hi Everyone
>         > We want to have SCHEDD with HAD and we put the following
>         configuration :
>         >
>         >
>         > MASTER_HA_LIST = SCHEDD
>         > SPOOL = /share/spool
>         > HA_LOCK_URL = file:/share/spool
>         > VALID_SPOOL_FILES = SCHEDD.lock
>         >
>         >
>         > But when we want to restart condor on all machines the
>         master gives
>         > the following error :
>         >
>         > Intercepting an unhandled exception.
>         >
>         > with the following COre file :
>         >
>         > //=====================================================
>         > PID: 3888
>         > Exception code: C0000005 ACCESS_VIOLATION
>         > Fault address:  0043E361 01:0003D361 C:\condor\bin
>         \condor_master.exe
>         >
>         > Registers:
>         > EAX:0051C0F0
>         > EBX:00000000
>         > ECX:00000000
>         > EDX:0109C0F0
>         > ESI:0109AE88
>         > EDI:00000400
>         > CS:EIP:0023:0043E361
>         > SS:ESP:002B:0157FE60  EBP:00000000
>         > DS:002B  ES:002B  FS:0053  GS:002B
>         > Flags:00010202
>         >
>         > Call stack:
>         > Address   Frame
>         >
>         > //=====================================================
>         >
>         >
>         > I am able to figure out anything.
>         >
>         > looking for help
>         >
>         > Kuldeep Singh Meel
>         > Sophomore
>         > Department of Computer Science and Engineering
>         > www.cse.iitb.ac.in/~kuldeepmeel
>         > My Blog : http://sweetwithchilli.blogspot.com/
>         
>         
>         > _______________________________________________
>         > Condor-users mailing list
>         > To unsubscribe, send a message to
>         condor-users-request@xxxxxxxxxxx with a
>         > subject: Unsubscribe
>         > You can also unsubscribe by visiting
>         > https://lists.cs.wisc.edu/mailman/listinfo/condor-users
>         >
>         > The archives can be found at:
>         > https://lists.cs.wisc.edu/archive/condor-users/
>         
>         _______________________________________________
>         Condor-users mailing list
>         To unsubscribe, send a message to
>         condor-users-request@xxxxxxxxxxx with a
>         subject: Unsubscribe
>         You can also unsubscribe by visiting
>         https://lists.cs.wisc.edu/mailman/listinfo/condor-users
>         
>         The archives can be found at:
>         https://lists.cs.wisc.edu/archive/condor-users/
>         
> 
> 
> _______________________________________________
> Condor-users mailing list
> To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> 
> The archives can be found at:
> https://lists.cs.wisc.edu/archive/condor-users/