Re: [Condor-users] What should I do to connect machines?

[kschwarz@xxxxxxxxxxxxxx]

Jhang,

It suspect your problem is because condor
is starting using the wrong NIC.
Could you please post the MasterLog
of the computer 9 (the one with two NIC) and of one of the other computers
to see in which ip addresses the daemons are starting?
If we confirm this is the problem, one
way to fix it is to set  NETWORK_INTERFACE = 192.168.0.109
on computer 9 to instruct Condor which NIC it has to use. In Windows there
is a way to set the order in which NIC cards are searched, but I don´t
 know in Linux (I am gueesing this is your OS) how to do that.

Regards, 
Klaus

Genie Jhang <geniejhang@xxxxxxxxxxx>
Sent by: condor-users-bounces@xxxxxxxxxxx

11/01/2010 14:26

Please respond to
Condor-Users Mail List <condor-users@xxxxxxxxxxx>

To	condor-users <condor-users@xxxxxxxxxxx>
cc
Subject	[Condor-users] What should I do to connect machines?

Thanks a lot for the helps all of you gave to me.
 
But, I found out there is another
problem at the very beginnig of the configuration.
 
Our lab. has 9 server computers, so I installed condor
all the computers
 
1-8 have ip address from 192.168.0.101 to 192.168.0.108,
respectively.
 
9 has one public ip and one private
ip 192.168.0.109.
 
So, 9 has installed condor with options "--prefix=/condor
--local-dir=/home/condor --type=execute,submit,manager --owner=condor"
 
and the others, 1-8, have installed condor with options "--prefix=/condor
--local-dir=/home/condor --type=execute,submit --central-manager=192.168.0.109
--owner=condor".
 
But, after I start condor_master at 9, then type condor_status,
there isn't any other machines.
 
It shows me only the below.
 
-------------------------------------
Name              
OpSys      Arch   State    
Activity LoadAv Mem   ActvtyTime
slot1@pheko09     
LINUX      INTEL  Owner    
Idle     1.000   506  0+00:00:07
slot2@pheko09     
LINUX      INTEL  Owner    
Idle     0.050   506  0+00:00:08
slot3@pheko09     
LINUX      INTEL  Owner    
Idle     0.000   506  0+00:00:09
slot4@pheko09     
LINUX      INTEL  Owner    
Idle     0.000   506  0+00:00:10
slot5@pheko09     
LINUX      INTEL  Owner    
Idle     0.000   506  0+00:00:11
slot6@pheko09     
LINUX      INTEL  Owner    
Idle     0.000   506  0+00:00:12
slot7@pheko09     
LINUX      INTEL  Owner    
Idle     0.000   506  0+00:00:13
slot8@pheko09     
LINUX      INTEL  Owner    
Idle     0.000   506  0+00:00:06
                    
Total Owner Claimed Unclaimed Matched Preempting Backfill
         INTEL/LINUX    
8     8       0        
0       0         
0        0
              
Total     8     8      
0         0      
0          0       
0
-------------------------------------
 
What should I do to connect other machines to 9?
 
Please help me.
 
Thanks you for reading this._______________________________________________
Condor-users mailing list
To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with
a
subject: Unsubscribe
You can also unsubscribe by visiting
https://lists.cs.wisc.edu/mailman/listinfo/condor-users

The archives can be found at:
https://lists.cs.wisc.edu/archive/condor-users/

---

This message is intended solely for the
use of its addressee and may contain privileged or confidential information.
All information contained herein shall be treated as confidential and shall
not be disclosed to any third party without Embraer’s prior written approval.
If you are not the addressee you should not distribute, copy or file this
message. In this case, please notify the sender and destroy its contents
immediately.
Esta mensagem é para uso exclusivo de seu destinatário e pode conter informações
privilegiadas e confidenciais. Todas as informações aqui contidas devem
ser tratadas como confidenciais e não devem ser divulgadas a terceiros
sem o prévio consentimento por escrito da Embraer. Se você não é o destinatário
não deve distribuir, copiar ou arquivar a mensagem. Neste caso, por favor,
notifique o remetente da mesma e destrua imediatamente a mensagem.