Mailing List Archives
Authenticated access
|
|
|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Condor-users] In Dynamic slot to match a new job to slot1.2 need condor_negotiator
- Date: Fri, 9 Jan 2009 21:59:42 +0530
- From: "Sateesh Potturu" <sateeshpnv@xxxxxxxxx>
- Subject: Re: [Condor-users] In Dynamic slot to match a new job to slot1.2 need condor_negotiator
Hi Matt,
But why is this job not getting started with "no match found" reported
in negotiator log?
I too tested this feature and face the same problem even though there
were a lot of negotiation cycles.
1/9 21:56:27 ---------- Started Negotiation Cycle ----------
1/9 21:56:27 Phase 1: Obtaining ads from collector ...
1/9 21:56:27 Getting all public ads ...
1/9 21:56:27 Trying to query collector <192.168.2.100:9618>
1/9 21:56:27 Sorting 5 ads ...
1/9 21:56:27 Getting startd private ads ...
1/9 21:56:27 Trying to query collector <192.168.2.100:9618>
1/9 21:56:27 Got ads: 5 public and 1 private
1/9 21:56:27 Public ads include 1 submitter, 1 startd
1/9 21:56:27 Entering compute_significant_attrs()
1/9 21:56:27 Leaving compute_significant_attrs() - result=JobUniverse,LastCheckp
1/9 21:56:27 Phase 2: Performing accounting ...
1/9 21:56:27 Phase 3: Sorting submitter ads by priority ...
1/9 21:56:27 Phase 4.1: Negotiating with schedds ...
1/9 21:56:27 NumStartdAds = 1
1/9 21:56:27 NormalFactor = 1.000000
1/9 21:56:27 MaxPrioValue = 0.557410
1/9 21:56:27 NumScheddAds = 1
1/9 21:56:27 Negotiating with sateesh@xxxx at <192.168.2.100:3538
1/9 21:56:27 0 seconds so far
1/9 21:56:27 Calculating schedd limit with the following parameters
1/9 21:56:27 ScheddPrio = 0.557410
1/9 21:56:27 ScheddPrioFactor = 1.000000
1/9 21:56:27 scheddShare = 0.000000
1/9 21:56:27 scheddAbsShare = 1.000000
1/9 21:56:27 ScheddUsage = 3
1/9 21:56:27 scheddLimit = 0
1/9 21:56:27 userprioCrumbs = 0 (0)
1/9 21:56:27 MaxscheddLimit = 0
1/9 21:56:27 Socket to <192.168.2.100:35388> already in cache, reusing
1/9 21:56:27 Over submitter resource limit (0) ... only consider startd rank
1/9 21:56:27 Sending SEND_JOB_INFO/eom
1/9 21:56:27 Getting reply from schedd ...
1/9 21:56:27 Got JOB_INFO command; getting classad/eom
1/9 21:56:27 Request 00129.00000:
1/9 21:56:27 Rejected 129.0 sateesh@xxxx <192.168.2.100:35388
1/9 21:56:27 Sending SEND_JOB_INFO/eom
1/9 21:56:27 Getting reply from schedd ...
1/9 21:56:27 Got NO_MORE_JOBS; done negotiating
1/9 21:56:27 This schedd hit its scheddlimit.
1/9 21:56:27 ---------- Finished Negotiation Cycle ----------
--
Regards,
Sateesh
On Fri, Jan 9, 2009 at 7:48 PM, Matthew Farrellee <matt@xxxxxxxxxx> wrote:
>
> Johnson koil Raj wrote:
> > Hi,
> >
> > I am using condor 7.2.0, and configured system for Dynamic slot.
> >
> > when I submit 2 job at if the status shows Slot1@xxx it match only one
> > job to Slot1.1@xxx and for second job says
> > 1 match but reject the job for unknown reasons
> > and negotiator log says following
> >
> > 1/9 19:03:06 Socket to <192.168.111.5:9661> already in cache, reusing
> > 1/9 19:03:06 Over submitter resource limit (0) ... only consider
> > startd ranks
> > 1/9 19:03:06 Sending SEND_JOB_INFO/eom
> > 1/9 19:03:06 Getting reply from schedd ...
> > 1/9 19:03:06 Got JOB_INFO command; getting classad/eom
> > 1/9 19:03:06 Request 00053.00000:
> > 1/9 19:03:06 Concurrency Limit: ccp is 3.000000
> > 1/9 19:03:06 Rejected 53.0 idealgrid@xxxxxxxxxxxxxxxxx
> > <192.168.111.5:9661>: no match found
> > 1/9 19:03:06 Sending SEND_JOB_INFO/eom
> > 1/9 19:03:06 Getting reply from schedd ...
> > 1/9 19:03:06 Got NO_MORE_JOBS; done negotiating
> > 1/9 19:03:06 This schedd hit its scheddlimit.
> > 1/9 19:03:06 ---------- Finished Negotiation Cycle ----------
> >
> >
> > After restarting the negotiator the second job perfectly matches and get
> > executed in a Slot1.2@xxx machine that time the negotiator log says
> >
> > 1/9 19:12:05 Socket to <192.168.111.5:9661> not in cache, creating one
> > 1/9 19:12:05 SocketCache: Found unused slot 0
> > 1/9 19:12:05 Sending SEND_JOB_INFO/eom
> > 1/9 19:12:05 Getting reply from schedd ...
> > 1/9 19:12:05 Got JOB_INFO command; getting classad/eom
> > 1/9 19:12:05 Request 00053.00000:
> > 1/9 19:12:05 Concurrency Limit: ccp is 3.000000
> > 1/9 19:12:05 Connecting to startd slot1@xxx at
> > <192.168.111.200:9619>
> > 1/9 19:12:05 File descriptor limits: max 1024, safe 820
> > 1/9 19:12:05 Sending PERMISSION, claim id, startdAd to schedd
> > 1/9 19:12:05 Matched 53.0 idealgrid@xxxxxxxxxxxxxxxxx
> > <192.168.111.5:9661> preempting none <192.168.111.200:9619> slot1@xxx
> >
> > Why I Negotiator restart required to match the second Job, Help me in
> > this..
> >
> > by
> > Johnson
>
> It's not required. Slot1 is only split once per negotiation cycle. So
> you'll get 1.1 after 1 cycle and 1.2 after a second. Your restart just
> forced a second cycle.
>
> Best,
>
>
> matt
>