Re: [Condor-users] Problems with setting up a Windows Condor Pool

[Ryan Wolf <rwolf@xxxxxxxxxxxx>]

If you are not using DNS, take a look at the configuration option  
NO_DNS. There are a few others you might need to change, too.

Quoting Max Raith <max_raith123@xxxxxx>:

> Hey Guys,
>
> well, I am still new to condor. The whole System is quite complex,  
> but I am willing to learn how to set it up and use it. Knowing that  
> this mailing list is very helpful I hope you could give me some  
> advice.
>
> Current Status:
>
> I was able to set up a Personal Condor to test the basic condor  
> functions. Everything worked fine. As a second step,
> I wanted to build up a condor-pool consisting of 2 Pc(Win XP). They  
> are connected and I verifed with the ping command that they can  
> communicate.
> So by following the installation instructions, I started to install  
> condor on the PC which should be the central Manager.
> I have chosen a name for the newly created pool. When it comes to  
> the permisson settings( I used the cmd-box and ipconfig /all to get  
> the IP adresses) i tipped in:
> It looked like :
> ... Read : *
> ...Write : <ip_of_PC1>, <ip_of_PC2
> ...Administration : <ip_of_Pc1>.
>
> I repeated the installation on Pc2 with the same settings.
>
> After all, i checked if the demons run on both pcs.
>
> On Pc1 ( the central manager) the Demons : collecor,master,procd,  
> negotiator, and schedd are running
>
> On Pc2  the Demons  : master,procd,schedd, stard are running
>
> When I tried the condor_status command, the cmd stayd blank.
>
>
> So how should I set up and configure Condor correctly, if i want  
> this setting :One is the central manager which only submit, and one  
> is the working only pc?
> It would be very kind if you gave me a step by step introduction.
>
> Thank you so much!
>
> Max Raith
>
>
>
>
> Masterlog :
>
>
>
>
>
> 4/7 12:00:24 UnsetEnv(NET_REMAP_ENABLE): SetEnvironmentVariable  
> failed, errno=203
> 4/7 12:00:24 ******************************************************
> 4/7 12:00:24 ** Condor (CONDOR_MASTER) STARTING UP
> 4/7 12:00:24 ** C:\condor\bin\condor_master.exe
> 4/7 12:00:24 ** SubsystemInfo: name=MASTER type=MASTER(2) class=DAEMON(1)
> 4/7 12:00:24 ** Configuration: subsystem:MASTER local:<NONE> class:DAEMON
> 4/7 12:00:24 ** $CondorVersion: 7.2.1 Feb 19 2009 BuildID: 133382 $
> 4/7 12:00:24 ** $CondorPlatform: INTEL-WINNT50 $
> 4/7 12:00:24 ** PID = 2512
> 4/7 12:00:24 ** Log last touched time unavailable (No such file or directory)
> 4/7 12:00:24 ******************************************************
> 4/7 12:00:24 Using config source: C:\condor\condor_config
> 4/7 12:00:24 Using local config sources:
> 4/7 12:00:24    C:\condor/condor_config.local
> 4/7 12:00:24 DaemonCore: Command Socket at <194.95.205.146:1137>
> 4/7 12:00:24 Started DaemonCore process  
> "C:\condor/bin/condor_collector.exe", pid and pgroup = 2492
> 4/7 12:00:27 Started DaemonCore process  
> "C:\condor/bin/condor_negotiator.exe", pid and pgroup = 1488
> 4/7 12:00:27 Started DaemonCore process  
> "C:\condor/bin/condor_schedd.exe", pid and pgroup = 2080
> 4/7 12:28:03 Sent signal 15 to COLLECTOR (pid 2492)
> 4/7 12:28:03 Sent signal 15 to NEGOTIATOR (pid 1488)
> 4/7 12:28:03 Sent signal 15 to SCHEDD (pid 2080)
> 4/7 12:28:03 The COLLECTOR (pid 2492) exited with status 0
> 4/7 12:28:03 The NEGOTIATOR (pid 1488) exited with status 0
> 4/7 12:28:03 The SCHEDD (pid 2080) died due to exception ACCESS_VIOLATION
> 4/7 12:28:03 All daemons are gone.
> 4/7 12:30:33 attempt to connect to <194.95.205.146:9618> failed:  
> connect errno = 10061 connection refused.
> 4/7 12:30:33 ERROR: SECMAN:2004:Failed to create security session to  
> <194.95.205.146:9618> with TCP|SECMAN:2003:TCP connection to  
> <194.95.205.146:9618> failed
>
> 4/7 12:30:33 Failed to start non-blocking update to <194.95.205.146:9618>.
> 4/7 12:31:19 Started DaemonCore process  
> "C:\condor/bin/condor_collector.exe", pid and pgroup = 2380
> 4/7 12:31:22 Started DaemonCore process  
> "C:\condor/bin/condor_negotiator.exe", pid and pgroup = 692
> 4/7 12:31:22 Started DaemonCore process  
> "C:\condor/bin/condor_schedd.exe", pid and pgroup = 3256
>
>
>
> _______________________________________________
> Condor-users mailing list
> To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
>
> The archives can be found at:
> https://lists.cs.wisc.edu/archive/condor-users/