Re: [Condor-users] Basic installation

["Alleon, Guillaume" <guillaume.alleon@xxxxxxxx>]

Hi Bob

Yes, I have those lines
> COLLECTOR_LOG   = $(LOG)/CollectorLog
> COLLECTOR_HOST  = $(CONDOR_HOST)
> COLLECTOR       = $(SBIN)/condor_collector

But COLLECTOR is not in the DAEMON list

Attached is my config file.

Thanks

--------
Guillaume Alleon
Senior Expert
Simulation, IT & Systems Engineering
EADS Innovation Works
EADS Singapore Pte Ltd
tel:+65 6778 2555 mob:+65 9180 7144


> -----Original Message-----
> From: condor-users-bounces@xxxxxxxxxxx [mailto:condor-users-
> bounces@xxxxxxxxxxx] On Behalf Of Robert Rati
> Sent: Wednesday, October 08, 2008 10:15 PM
> To: Condor-Users Mail List
> Subject: Re: [Condor-users] Basic installation
> 
> > I just downloaded the latest stable release (7.05) for Debian 4.0
> >
> > I want to install the server part on a Ubuntu Server 8.04. My
initial
> > plan was to use the dynamic version but because I got the following
> > error:
> >    error while loading shared libraries: libssp.so.0: cannot open
> shared
> > object file: No such file or directory
> > I moved to the static version
> >
> > I search Google, read the mailing list but could not find any answer
> > fixing that problem.
> 
> I believe if you install the libssp0 package it will resolve that
> issue.
> 
> > Switching to the static version, the installation was done using
> > ./condor_install --prefix=/opt/condor-7.0.5/
--local-dir=/home/condor
> > --type=manager,submit
> >
> > The only problem was some weird message about ldd exiting with an
> > unknown error code.
> >
> > But I have still some problems. Condor_status keeps on repeating:
> > Error:  Could not fetch ads --- can't find collector
> >
> > And the logs state the same.
> > Thanks for your help
> 
> Looks like your condor_config file doesn't have the collector
> configured.  Do you see lines like:
> 
> COLLECTOR_LOG   = $(LOG)/CollectorLog
> COLLECTOR_HOST  = $(CONDOR_HOST)
> COLLECTOR       = $(SBIN)/condor_collector
> 
> 
> Try looking here for configuration options:
> http://www.cs.wisc.edu/condor/manual/v7.1/3_3Configuration.html
> 
> Posting your config file would help as well.
> 
> Rob
> _______________________________________________
> Condor-users mailing list
> To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx
with
> a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> 
> The archives can be found at:
> https://lists.cs.wisc.edu/archive/condor-users/

######################################################################
##
##  condor_config
##
##  This is the global configuration file for condor.
##
##  The file is divided into four main parts:
##  Part 1:  Settings you MUST customize 
##  Part 2:  Settings you may want to customize
##  Part 3:  Settings that control the policy of when condor will
##           start and stop jobs on your machines
##  Part 4:  Settings you should probably leave alone (unless you
##  know what you're doing)
##
##  Please read the INSTALL file (or the Install chapter in the
##  Condor Administrator's Manual) for detailed explanations of the 
##  various settings in here and possible ways to configure your
##  pool. 
##
##  If you are installing Condor as root and then handing over the
##  administration of this file to a person you do not trust with
##  root access, please read the Installation chapter paying careful
##  note to the condor_config.root entries.
##
##  Unless otherwise specified, settings that are commented out show
##  the defaults that are used if you don't define a value.  Settings
##  that are defined here MUST BE DEFINED since they have no default
##  value.
##
##  Unless otherwise indicated, all settings which specify a time are
##  defined in seconds.
##
######################################################################

######################################################################
######################################################################
##
##  ######                                     #
##  #     #    ##    #####    #####           ##
##  #     #   #  #   #    #     #            # #
##  ######   #    #  #    #     #              #
##  #        ######  #####      #              #
##  #        #    #  #   #      #              #
##  #        #    #  #    #     #            #####
##
##  Part 1:  Settings you must customize:
######################################################################
######################################################################

##  What machine is your central manager?
#CONDOR_HOST		= gdx0230.orsay.grid5000.fr

##--------------------------------------------------------------------
##  Pathnames:
##--------------------------------------------------------------------
##  Where have you installed the bin, sbin and lib condor directories?   
RELEASE_DIR		= /usr/local/condor

##  Where is the local condor directory for each host?  
##  This is where the local config file(s), logs and
##  spool/execute directories are located
LOCAL_DIR		= $(TILDE)
#LOCAL_DIR		= $(RELEASE_DIR)/hosts/$(HOSTNAME)

##  Where is the machine-specific local config file for each host?
LOCAL_CONFIG_FILE	= $(LOCAL_DIR)/condor_config.local
#LOCAL_CONFIG_FILE	= $(RELEASE_DIR)/etc/$(HOSTNAME).local

## If the local config file is not present, is it an error?
## WARNING: This is a potential security issue. 
## If not specificed, te default is True
#REQUIRE_LOCAL_CONFIG_FILE = TRUE

##--------------------------------------------------------------------
##  Mail parameters:
##--------------------------------------------------------------------
##  When something goes wrong with condor at your site, who should get
##  the email?
CONDOR_ADMIN		= root@xxxxxxxxxxxxxxxxxxxxxxxxxxx

##  Full path to a mail delivery program that understands that "-s"
##  means you want to specify a subject:
MAIL			= /usr/bin/mail

##--------------------------------------------------------------------
##  Network domain parameters:
##--------------------------------------------------------------------
##  Internet domain of machines sharing a common UID space.  If your
##  machines don't share a common UID space, set it to 
##  UID_DOMAIN = $(FULL_HOSTNAME)
##  to specify that each machine has its own UID space.
UID_DOMAIN	= $(FULL_HOSTNAME)

##  Internet domain of machines sharing a common file system.
##  If your machines don't use a network file system, set it to
##  FILESYSTEM_DOMAIN = $(FULL_HOSTNAME)
##  to specify that each machine has its own file system. 
FILESYSTEM_DOMAIN	= $(FULL_HOSTNAME)

##  This macro is used to specify a short description of your pool. 
##  It should be about 20 characters long. For example, the name of 
##  the UW-Madison Computer Science Condor Pool is ``UW-Madison CS''.
COLLECTOR_NAME 		= My Pool

######################################################################
######################################################################
##  
##  ######                                   #####
##  #     #    ##    #####    #####         #     #
##  #     #   #  #   #    #     #                 #
##  ######   #    #  #    #     #            #####
##  #        ######  #####      #           #
##  #        #    #  #   #      #           #
##  #        #    #  #    #     #           #######
##  
##  Part 2:  Settings you may want to customize: 
##  (it is generally safe to leave these untouched) 
######################################################################
######################################################################

##
##  The user/group ID <uid>.<gid> of the "Condor" user. 
##  (this can also be specified in the environment)
##  Note: the CONDOR_IDS setting is ignored on Win32 platforms
#CONDOR_IDS=x.x

##--------------------------------------------------------------------
##  Flocking: Submitting jobs to more than one pool
##--------------------------------------------------------------------
##  Flocking allows you to run your jobs in other pools, or lets
##  others run jobs in your pool.
## 
##  To let others flock to you, define FLOCK_FROM.
## 
##  To flock to others, define FLOCK_TO.

##  FLOCK_FROM defines the machines where you would like to grant
##  people access to your pool via flocking. (i.e. you are granting
##  access to these machines to join your pool).
FLOCK_FROM = 
##  An example of this is:
#FLOCK_FROM = somehost.friendly.domain, anotherhost.friendly.domain

##  FLOCK_TO defines the central managers of the pools that you want
##  to flock to. (i.e. you are specifying the machines that you
##  want your jobs to be negotiated at -- thereby specifying the
##  pools they will run in.)
FLOCK_TO = 
##  An example of this is:
#FLOCK_TO = central_manager.friendly.domain, condor.cs.wisc.edu

##  FLOCK_COLLECTOR_HOSTS should almost always be the same as
##  FLOCK_NEGOTIATOR_HOSTS (as shown below).  The only reason it would be
##  different is if the collector and negotiator in the pool that you are
##  flocking too are running on different machines (not recommended).
##  The collectors must be specified in the same corresponding order as
##  the FLOCK_NEGOTIATOR_HOSTS list.
FLOCK_NEGOTIATOR_HOSTS = $(FLOCK_TO)
FLOCK_COLLECTOR_HOSTS = $(FLOCK_TO)
## An example of having the negotiator and the collector on different
## machines is:
#FLOCK_NEGOTIATOR_HOSTS = condor.cs.wisc.edu, condor-negotiator.friendly.domain
#FLOCK_COLLECTOR_HOSTS =  condor.cs.wisc.edu, condor-collector.friendly.domain

##--------------------------------------------------------------------
##  Host/IP access levels
##--------------------------------------------------------------------
##  Please see the administrator's manual for details on these
##  settings, what they're for, and how to use them.

##  What machines have administrative rights for your pool?  This
##  defaults to your central manager.  You should set it to the
##  machine(s) where whoever is the condor administrator(s) works
##  (assuming you trust all the users who log into that/those
##  machine(s), since this is machine-wide access you're granting).
HOSTALLOW_ADMINISTRATOR = $(CONDOR_HOST)

##  If there are no machines that should have administrative access 
##  to your pool (for example, there's no machine where only trusted
##  users have accounts), you can uncomment this setting.
##  Unfortunately, this will mean that administering your pool will 
##  be more difficult.
#HOSTDENY_ADMINISTRATOR = *

##  What machines should have "owner" access to your machines, meaning
##  they can issue commands that a machine owner should be able to
##  issue to their own machine (like condor_vacate).  This defaults to
##  machines with administrator access, and the local machine.  This
##  is probably what you want.
HOSTALLOW_OWNER = $(FULL_HOSTNAME), $(HOSTALLOW_ADMINISTRATOR)

##  Read access.  Machines listed as allow (and/or not listed as deny)
##  can view the status of your pool, but cannot join your pool 
##  or run jobs.
##  NOTE: By default, without these entries customized, you
##  are granting read access to the whole world.  You may want to
##  restrict that to hosts in your domain.  If possible, please also
##  grant read access to "*.cs.wisc.edu", so the Condor developers
##  will be able to view the status of your pool and more easily help
##  you install, configure or debug your Condor installation.
##  It is important to have this defined.
HOSTALLOW_READ = * 
#HOSTALLOW_READ = *.your.domain, *.cs.wisc.edu
#HOSTDENY_READ = *.bad.subnet, bad-machine.your.domain, 144.77.88.*

##  Write access.  Machines listed here can join your pool, submit
##  jobs, etc.  Note: Any machine which has WRITE access must
##  also be granted READ access.  Granting WRITE access below does
##  not also automatically grant READ access; you must change
##  HOSTALLOW_READ above as well.
##
##  You must set this to something else before Condor will run.
##  This most simple option is:
##    HOSTALLOW_WRITE = *
##  but note that this will allow anyone to submit jobs or add
##  machines to your pool and is serious security risk.
HOSTALLOW_WRITE = *
#HOSTALLOW_WRITE = *.your.domain, your-friend's-machine.other.domain
#HOSTDENY_WRITE = bad-machine.your.domain

##  Negotiator access.  Machines listed here are trusted central
##  managers.  You should normally not have to change this.
HOSTALLOW_NEGOTIATOR = $(CONDOR_HOST)
##  Now, with flocking we need to let the SCHEDD trust the other 
##  negotiators we are flocking with as well.  You should normally 
##  not have to change this either.
HOSTALLOW_NEGOTIATOR_SCHEDD = $(CONDOR_HOST), $(FLOCK_NEGOTIATOR_HOSTS)

##  Config access.  Machines listed here can use the condor_config_val
##  tool to modify all daemon configurations except those specified in
##  the condor_config.root file.  This level of host-wide access
##  should only be granted with extreme caution.  By default, config
##  access is denied from all hosts.
#HOSTALLOW_CONFIG = trusted-host.your.domain

##  Flocking Configs.  These are the real things that Condor looks at,
##  but we set them from the FLOCK_FROM/TO macros above.  It is safe
##  to leave these unchanged.
HOSTALLOW_WRITE_COLLECTOR = $(HOSTALLOW_WRITE), $(FLOCK_FROM)
HOSTALLOW_WRITE_STARTD    = $(HOSTALLOW_WRITE), $(FLOCK_FROM)
HOSTALLOW_READ_COLLECTOR  = $(HOSTALLOW_READ), $(FLOCK_FROM)
HOSTALLOW_READ_STARTD     = $(HOSTALLOW_READ), $(FLOCK_FROM)


##--------------------------------------------------------------------
##  Security parameters for setting configuration values remotely:
##--------------------------------------------------------------------
##  These parameters define the list of attributes that can be set
##  remotely with condor_config_val for the security access levels
##  defined above (for example, WRITE, ADMINISTRATOR, CONFIG, etc).
##  Please see the administrator's manual for futher details on these
##  settings, what they're for, and how to use them.  There are no
##  default values for any of these settings.  If they are not
##  defined, no attributes can be set with condor_config_val.

## Do you want to allow condor_config_val -rset to work at all?
## This feature is disabled by default, so to enable, you must
## uncomment the following setting and change the value to "True". 
## Note: changing this requires a restart not just a reconfig.
#ENABLE_RUNTIME_CONFIG = False

## Do you want to allow condor_config_val -set to work at all?
## This feature is disabled by default, so to enable, you must
## uncomment the following setting and change the value to "True". 
## Note: changing this requires a restart not just a reconfig.
#ENABLE_PERSISTENT_CONFIG = False

## Directory where daemons should write persistent config files (used
## to support condor_config_val -set).  This directory should *ONLY*
## be writable by root (or the user the Condor daemons are running as
## if non-root).  There is no default, administrators must define this.
## Note: changing this requires a restart not just a reconfig.
#PERSISTENT_CONFIG_DIR = /full/path/to/root-only/local/directory

##  Attributes that can be set by hosts with "CONFIG" permission (as
##  defined with HOSTALLOW_CONFIG and HOSTDENY_CONFIG above).
##  The commented-out value here was the default behavior of Condor
##  prior to version 6.3.3.  If you don't need this behavior, you
##  should leave this commented out.
#SETTABLE_ATTRS_CONFIG = *

##  Attributes that can be set by hosts with "ADMINISTRATOR"
##  permission (as defined above)
#SETTABLE_ATTRS_ADMINISTRATOR = *_DEBUG, MAX_*_LOG

##  Attributes that can be set by hosts with "OWNER" permission (as
##  defined above) NOTE: any Condor job running on a given host will
##  have OWNER permission on that host by default.  If you grant this
##  kind of access, Condor jobs will be able to modify any attributes
##  you list below on the machine where they are running.  This has
##  obvious security implications, so only grant this kind of
##  permission for custom attributes that you define for your own use
##  at your pool (custom attributes about your machines that are
##  published with the STARTD_EXPRS setting, for example).
#SETTABLE_ATTRS_OWNER = your_custom_attribute, another_custom_attr

##  You can also define daemon-specific versions of each of these
##  settings.  For example, to define settings that can only be
##  changed in the condor_startd's configuration by hosts with OWNER
##  permission, you would use:
#STARTD_SETTABLE_ATTRS_OWNER = your_custom_attribute_name


##--------------------------------------------------------------------
##  Network filesystem parameters:
##--------------------------------------------------------------------
##  Do you want to use NFS for file access instead of remote system
##  calls?
#USE_NFS		= False

##  Do you want to use AFS for file access instead of remote system
##  calls?
#USE_AFS		= False

##--------------------------------------------------------------------
##  Checkpoint server:
##--------------------------------------------------------------------
##  Do you want to use a checkpoint server if one is available?  If a
##  checkpoint server isn't available or USE_CKPT_SERVER is set to
##  False, checkpoints will be written to the local SPOOL directory on
##  the submission machine.
#USE_CKPT_SERVER	= True

##  What's the hostname of this machine's nearest checkpoint server?
#CKPT_SERVER_HOST	= checkpoint-server-hostname.your.domain

##  Do you want the starter on the execute machine to choose the
##  checkpoint server?  If False, the CKPT_SERVER_HOST set on
##  the submit machine is used.  Otherwise, the CKPT_SERVER_HOST set
##  on the execute machine is used.  The default is true.
#STARTER_CHOOSES_CKPT_SERVER = True

##--------------------------------------------------------------------
##  Miscellaneous:
##--------------------------------------------------------------------
##  Try to save this much swap space by not starting new shadows.  
##  Specified in megabytes.
#RESERVED_SWAP		= 5

##  What's the maximum number of jobs you want a single submit machine
##  to spawn shadows for?
MAX_JOBS_RUNNING	= 5000

##  Condor needs to create a few lock files to synchronize access to
##  various log files.  Because of problems we've had with network
##  filesystems and file locking over the years, we HIGHLY recommend
##  that you put these lock files on a local partition on each
##  machine.  If you don't have your LOCAL_DIR on a local partition,
##  be sure to change this entry.  Whatever user (or group) condor is
##  running as needs to have write access to this directory.  If
##  you're not running as root, this is whatever user you started up
##  the condor_master as.  If you are running as root, and there's a
##  condor account, it's probably condor.  Otherwise, it's whatever
##  you've set in the CONDOR_IDS environment variable.  See the Admin
##  manual for details on this.
LOCK		= $(LOG)

##  If you don't use a fully qualified name in your /etc/hosts file
##  (or NIS, etc.) for either your official hostname or as an alias,
##  Condor wouldn't normally be able to use fully qualified names in
##  places that it'd like to.  You can set this parameter to the
##  domain you'd like appended to your hostname, if changing your host
##  information isn't a good option.  This parameter must be set in
##  the global config file (not the LOCAL_CONFIG_FILE from above). 
DEFAULT_DOMAIN_NAME = orsay.grid5000.fr

##  If you don't have DNS set up, Condor will normally fail in many
##  places because it can't resolve hostnames to IP addresses and
##  vice-versa. If you enable this option, Condor will use
##  pseudo-hostnames constructed from a machine's IP address and the
##  DEFAULT_DOMAIN_NAME. Both NO_DNS and DEFAULT_DOMAIN must set in
##  your top-level config file for this mode of operation to work
##  properly.
#NO_DNS = True

##  Condor can be told whether or not you want the Condor daemons to
##  create a core file if something really bad happens.  This just
##  sets the resource limit for the size of a core file.  By default,
##  we don't do anything, and leave in place whatever limit was in
##  effect when you started the Condor daemons.  If this parameter is
##  set and "True", we increase the limit to as large as it gets.  If
##  it's set to "False", we set the limit at 0 (which means that no
##  core files are even created).  Core files greatly help the Condor
##  developers debug any problems you might be having.
#CREATE_CORE_FILES	= True

##  Condor Glidein downloads binaries from a remote server for the
##  machines into which you're gliding. This saves you from manually
##  downloading and installing binaries for every architecture you
##  might want to glidein to. The default server is one maintained at
##  The University of Wisconsin. If you don't want to use the UW
##  server, you can set up your own and change the following values to
##  point to it, instead.
GLIDEIN_SERVER_URLS = \
  http://www.cs.wisc.edu/condor/glidein/binaries \
  gsiftp://gridftp.cs.wisc.edu/p/condor/public/binaries/glidein

## List the sites you want to GlideIn to on the GLIDEIN_SITES. For example, 
## if you'd like to GlideIn to some Alliance GiB resources, 
## uncomment the line below.
## Make sure that $(GLIDEIN_SITES) is included in HOSTALLOW_READ and
## HOSTALLW_WRITE, or else your GlideIns won't be able to join your pool.
#GLIDEIN_SITES = *.ncsa.uiuc.edu, *.cs.wisc.edu, *.mcs.anl.gov 
GLIDEIN_SITES = 

##  If your site needs to use UID_DOMAIN settings (defined above) that
##  are not real Internet domains that match the hostnames, you can
##  tell Condor to trust whatever UID_DOMAIN a submit machine gives to
##  the execute machine and just make sure the two strings match.  The
##  default for this setting is False, since it is more secure this
##  way.
#TRUST_UID_DOMAIN = False

## If you would like to be informed in near real-time via condor_q when
## a vanilla/standard/java job is in a suspension state, set this attribute to
## TRUE. However, this real-time update of the condor_schedd by the shadows 
## could cause performance issues if there are thousands of concurrently
## running vanilla/standard/java jobs under a single condor_schedd and they are 
## allowed to suspend and resume.
#REAL_TIME_JOB_SUSPEND_UPDATES = False

## A standard universe job can perform arbitrary shell calls via the
## libc 'system()' function. This function call is routed back to the shadow
## which performs the actual system() invocation in the initialdir of the
## running program and as the user who submitted the job. However, since the
## user job can request ARBITRARY shell commands to be run by the shadow, this
## is a generally unsafe practice. This should only be made available if it is
## actually needed. If this attribute is not defined, then it is the same as
## it being defined to False. Set it to True to allow the shadow to execute
## arbitrary shell code from the user job.
#SHADOW_ALLOW_UNSAFE_REMOTE_EXEC = False

## KEEP_OUTPUT_SANDBOX is an optional feature to tell Condor-G to not
## remove the job spool when the job leaves the queue.  To use, just
## set to TRUE.  Since you will be operating Condor-G in this manner,
## you may want to put leave_in_queue = false in your job submit
## description files, to tell Condor-G to simply remove the job from
## the queue immediately when the job completes (since the output files
## will stick around no matter what).
#KEEP_OUTPUT_SANDBOX = False

## This setting tells the negotiator to ignore user priorities.  This
## avoids problems where jobs from different users won't run when using
## condor_advertise instead of a full-blown startd (some of the user
## priority system in Condor relies on information from the startd --
## we will remove this reliance when we support the user priority
## system for grid sites in the negotiator; for now, this setting will
## just disable it).
#NEGOTIATOR_IGNORE_USER_PRIORITIES = False

## These are the directories used to locate classad plug-in functions
#CLASSAD_SCRIPT_DIRECTORY =
#CLASSAD_LIB_PATH =

## This setting tells Condor whether to delegate or copy GSI X509
## credentials when sending them over the wire between daemons.
## Delegation can take up to a second, which is very slow when
## submitting a large number of jobs. Copying exposes the credential
## to third parties if Condor isn't set to encrypt communications.
## By default, Condor will delegate rather than copy.
DELEGATE_JOB_GSI_CREDENTIALS = True

##--------------------------------------------------------------------
##  Settings that control the daemon's debugging output:
##--------------------------------------------------------------------

##
## The flags given in ALL_DEBUG are shared between all daemons.
##

ALL_DEBUG               =

MAX_COLLECTOR_LOG	= 1000000
COLLECTOR_DEBUG		=

MAX_KBDD_LOG		= 1000000
KBDD_DEBUG		=

MAX_NEGOTIATOR_LOG	= 1000000
NEGOTIATOR_DEBUG	= D_MATCH
MAX_NEGOTIATOR_MATCH_LOG = 1000000

MAX_SCHEDD_LOG		= 1000000
SCHEDD_DEBUG		= D_COMMAND D_PID

MAX_SHADOW_LOG		= 1000000
SHADOW_DEBUG		=

MAX_STARTD_LOG		= 1000000
STARTD_DEBUG		= D_COMMAND

MAX_STARTER_LOG		= 1000000
STARTER_DEBUG		= D_NODATE

MAX_MASTER_LOG		= 1000000
MASTER_DEBUG		= D_COMMAND
##  When the master starts up, should it truncate it's log file?
#TRUNC_MASTER_LOG_ON_OPEN        = False

## The daemons touch their log file periodically, even when they have
## nothing to write. When a daemon starts up, it prints the last time
## the log file was modified. This lets you estimate when a previous
## instance of a daemon stopped running. This paramete controls often
## the daemons touch the file (in seconds).
TOUCH_LOG_INTERVAL = 60

######################################################################
######################################################################
##  
##  ######                                   #####
##  #     #    ##    #####    #####         #     #
##  #     #   #  #   #    #     #                 #
##  ######   #    #  #    #     #            #####
##  #        ######  #####      #                 #
##  #        #    #  #   #      #           #     #
##  #        #    #  #    #     #            #####
##  
##  Part 3:  Settings control the policy for running, stopping, and
##  periodically checkpointing condor jobs:
######################################################################
######################################################################

##  This section contains macros are here to help write legible
##  expressions:
MINUTE		= 60
HOUR		= (60 * $(MINUTE))
StateTimer	= (CurrentTime - EnteredCurrentState)
ActivityTimer	= (CurrentTime - EnteredCurrentActivity)
ActivationTimer = (CurrentTime - JobStart)
LastCkpt	= (CurrentTime - LastPeriodicCheckpoint)

##  The JobUniverse attribute is just an int.  These macros can be
##  used to specify the universe in a human-readable way:
STANDARD	= 1
PVM		= 4
VANILLA		= 5
MPI		= 8
IsPVM           = (TARGET.JobUniverse == $(PVM))
IsMPI           = (TARGET.JobUniverse == $(MPI))
IsVanilla       = (TARGET.JobUniverse == $(VANILLA))
IsStandard      = (TARGET.JobUniverse == $(STANDARD))

NonCondorLoadAvg	= (LoadAvg - CondorLoadAvg)
BackgroundLoad		= 0.3
HighLoad		= 0.5
StartIdleTime		= 15 * $(MINUTE)
ContinueIdleTime	=  5 * $(MINUTE)
MaxSuspendTime		= 10 * $(MINUTE)
MaxVacateTime		= 10 * $(MINUTE)

KeyboardBusy		= (KeyboardIdle < $(MINUTE))
ConsoleBusy		= (ConsoleIdle  < $(MINUTE))
CPUIdle			= ($(NonCondorLoadAvg) <= $(BackgroundLoad))
CPUBusy			= ($(NonCondorLoadAvg) >= $(HighLoad))
KeyboardNotBusy		= ($(KeyboardBusy) == False)

BigJob		= (TARGET.ImageSize >= (50 * 1024))
MediumJob	= (TARGET.ImageSize >= (15 * 1024) && TARGET.ImageSize < (50 * 1024))
SmallJob	= (TARGET.ImageSize <  (15 * 1024))

JustCPU			= ($(CPUBusy) && ($(KeyboardBusy) == False))
MachineBusy		= ($(CPUBusy) || $(KeyboardBusy))


WANT_SUSPEND        = False
WANT_VACATE         = False
START                       = True
SUSPEND                     = False
CONTINUE            = True
PREEMPT                     = False
KILL                        = False
PERIODIC_CHECKPOINT = False
PREEMPTION_REQUIREMENTS = False
PREEMPTION_RANK = 0


######################################################################
######################################################################
##  
##  ######                                  #
##  #     #    ##    #####    #####         #    #
##  #     #   #  #   #    #     #           #    #
##  ######   #    #  #    #     #           #    #
##  #        ######  #####      #           #######
##  #        #    #  #   #      #                #
##  #        #    #  #    #     #                #
##  
##  Part 4:  Settings you should probably leave alone:
##  (unless you know what you're doing)
######################################################################
######################################################################

######################################################################
##  Daemon-wide settings:
######################################################################

##  Pathnames
LOG		= $(LOCAL_DIR)/log
SPOOL		= /tmp/condor/spool
EXECUTE		= /tmp/condor/execute
BIN		= $(RELEASE_DIR)/bin
LIB		= $(RELEASE_DIR)/lib
INCLUDE		= $(RELEASE_DIR)/include
SBIN		= $(RELEASE_DIR)/sbin
LIBEXEC		= $(RELEASE_DIR)/libexec

## If you leave HISTORY undefined (comment it out), no history file
## will be created. 
HISTORY		= $(SPOOL)/history

##  Log files
COLLECTOR_LOG	= $(LOG)/CollectorLog
KBDD_LOG	= $(LOG)/KbdLog
MASTER_LOG	= $(LOG)/MasterLog
NEGOTIATOR_LOG	= $(LOG)/NegotiatorLog
NEGOTIATOR_MATCH_LOG = $(LOG)/MatchLog
SCHEDD_LOG	= $(LOG)/SchedLog
SHADOW_LOG	= $(LOG)/ShadowLog
STARTD_LOG	= $(LOG)/StartLog
STARTER_LOG	= $(LOG)/StarterLog

##  Lock files
SHADOW_LOCK	= $(LOCK)/ShadowLock

##  This setting primarily allows you to change the port that the
##  collector is listening on.  By default, the collector uses port
##  9618, but you can set the port with a ":port", such as:
##  COLLECTOR_HOST = $(CONDOR_HOST):1234
COLLECTOR_HOST  = $(CONDOR_HOST)

## The NEGOTIATOR_HOST parameter has been deprecated.  The port where
## the negotiator is listening is now dynamically allocated and the IP
## and port are now obtained from the collector, just like all the
## other daemons.  However, if your pool contains any machines that
## are running version 6.7.3 or earlier, you can uncomment this
## setting to go back to the old fixed-port (9614) for the negotiator.
#NEGOTIATOR_HOST = $(CONDOR_HOST)

##  How long are you willing to let daemons try their graceful
##  shutdown methods before they do a hard shutdown? (30 minutes)
#SHUTDOWN_GRACEFUL_TIMEOUT	= 1800

##  How much disk space would you like reserved from Condor?  In
##  places where Condor is computing the free disk space on various
##  partitions, it subtracts the amount it really finds by this
##  many megabytes.  (If undefined, defaults to 0).
RESERVED_DISK		= 5

##  If your machine is running AFS and the AFS cache lives on the same
##  partition as the other Condor directories, and you want Condor to
##  reserve the space that your AFS cache is configured to use, set
##  this to true.
#RESERVE_AFS_CACHE	= False

##  By default, if a user does not specify "notify_user" in the submit
##  description file, any email Condor sends about that job will go to
##  "username@UID_DOMAIN".  If your machines all share a common UID
##  domain (so that you would set UID_DOMAIN to be the same across all
##  machines in your pool), *BUT* email to user@UID_DOMAIN is *NOT*
##  the right place for Condor to send email for your site, you can
##  define the default domain to use for email.  A common example
##  would be to set EMAIL_DOMAIN to the fully qualified hostname of
##  each machine in your pool, so users submitting jobs from a
##  specific machine would get email sent to user@xxxxxxxxxxxxxxxxxxx,
##  instead of user@xxxxxxxxxxxx  In general, you should leave this
##  setting commented out unless two things are true: 1) UID_DOMAIN is
##  set to your domain, not $(FULL_HOSTNAME), and 2) email to
##  user@UID_DOMAIN won't work.
#EMAIL_DOMAIN = $(FULL_HOSTNAME)

##  If your site needs to use TCP updates to the collector, instead of
##  UDP, you can enable this feature.  HOWEVER, WE DO NOT RECOMMEND
##  THIS FOR MOST SITES!  In general, the only sites that might want
##  this feature are pools made up of machines connected via a
##  wide-area network where UDP packets are frequently or always
##  dropped.  If you enable this feature, you *MUST* turn on the
##  COLLECTOR_SOCKET_CACHE_SIZE setting at your collector, and each
##  entry in the socket cache uses another file descriptor.  If not
##  defined, this feature is disabled by default.
#UPDATE_COLLECTOR_WITH_TCP = True

## HIGHPORT and LOWPORT let you set the range of ports that Condor
## will use. This may be useful if you are behind a firewall. By
## default, Condor uses port 9618 for the collector, 9614 for the
## negotiator, and system-assigned (apparently random) ports for
## everything else. HIGHPORT and LOWPORT only affect these
## system-assigned ports, but will restrict them to the range you
## specify here. If you want to change the well-known ports for the
## collector or negotiator, see COLLECTOR_HOST or NEGOTIATOR_HOST.
## Note that both LOWPORT and HIGHPORT must be at least 1024 if you
## are not starting your daemons as root.  You may also specify
## different port ranges for incoming and outgoing connections by
## using IN_HIGHPORT/IN_LOWPORT and OUT_HIGHPORT/OUT_LOWPORT.
#HIGHPORT = 9700 
#LOWPORT = 9600

######################################################################
##  Daemon-specific settings:
######################################################################

##--------------------------------------------------------------------
##  condor_master
##--------------------------------------------------------------------
##  Daemons you want the master to keep running for you:
DAEMON_LIST			= MASTER, STARTD, SCHEDD

##  Which daemons use the Condor DaemonCore library (i.e., not the
##  checkpoint server or custom user daemons)?
##  Note: Daemons in this list cannot use a static command port.
#DC_DAEMON_LIST = \
#MASTER, STARTD, SCHEDD, KBDD, COLLECTOR, NEGOTIATOR, EVENTD, \
#VIEW_SERVER, CONDOR_VIEW, VIEW_COLLECTOR, HAWKEYE, CREDD, HAD, \
#QUILL


##  Where are the binaries for these daemons?
MASTER				= $(SBIN)/condor_master
STARTD				= $(SBIN)/condor_startd
SCHEDD				= $(SBIN)/condor_schedd
KBDD				= $(SBIN)/condor_kbdd
NEGOTIATOR			= $(SBIN)/condor_negotiator
COLLECTOR			= $(SBIN)/condor_collector
STARTER_LOCAL			= $(SBIN)/condor_starter

##  When the master starts up, it can place it's address (IP and port)
##  into a file.  This way, tools running on the local machine don't
##  need to query the central manager to find the master.  This
##  feature can be turned off by commenting out this setting.
MASTER_ADDRESS_FILE = $(LOG)/.master_address

##  Where should the master find the condor_preen binary? If you don't
##  want preen to run at all, just comment out this setting.
PREEN				= $(SBIN)/condor_preen

##  How do you want preen to behave?  The "-m" means you want email
##  about files preen finds that it thinks it should remove.  The "-r"
##  means you want preen to actually remove these files.  If you don't
##  want either of those things to happen, just remove the appropriate
##  one from this setting.
PREEN_ARGS			= -m -r

##  How often should the master start up condor_preen? (once a day)
#PREEN_INTERVAL			= 86400

##  If a daemon dies an unnatural death, do you want email about it?
#PUBLISH_OBITUARIES		= True

##  If you're getting obituaries, how many lines of the end of that
##  daemon's log file do you want included in the obituary?
#OBITUARY_LOG_LENGTH		= 20

##  Should the master run?
#START_MASTER			= True

##  Should the master start up the daemons you want it to?
#START_DAEMONS			= True

##  How often do you want the master to send an update to the central
##  manager? 
MASTER_UPDATE_INTERVAL		= 30

##  How often do you want the master to check the timestamps of the
##  daemons it's running?  If any daemons have been modified, the
##  master restarts them.
MASTER_CHECK_NEW_EXEC_INTERVAL	= 30

##  Once you notice new binaries, how long should you wait before you
##  try to execute them?
MASTER_NEW_BINARY_DELAY	= 15

##  What's the maximum amount of time you're willing to give the
##  daemons to quickly shutdown before you just kill them outright?
SHUTDOWN_FAST_TIMEOUT		= 20

######
##  Exponential backoff settings:
######
##  When a daemon keeps crashing, we use "exponential backoff" so we
##  wait longer and longer before restarting it.  This is the base of
##  the exponent used to determine how long to wait before starting
##  the daemon again:
#MASTER_BACKOFF_FACTOR		= 2.0

##  What's the maximum amount of time you want the master to wait
##  between attempts to start a given daemon?  (With 2.0 as the
##  MASTER_BACKOFF_FACTOR, you'd hit 1 hour in 12 restarts...)
#MASTER_BACKOFF_CEILING		= 3600

##  How long should a daemon run without crashing before we consider
##  it "recovered".  Once a daemon has recovered, we reset the number
##  of restarts so the exponential backoff stuff goes back to normal. 
#MASTER_RECOVER_FACTOR		= 300


##--------------------------------------------------------------------
##  condor_startd
##--------------------------------------------------------------------
##  Where are the various condor_starter binaries installed?
STARTER_LIST = STARTER, STARTER_PVM, STARTER_STANDARD
STARTER			= $(SBIN)/condor_starter
STARTER_PVM		= $(SBIN)/condor_starter.pvm
STARTER_STANDARD	= $(SBIN)/condor_starter.std
STARTER_LOCAL		= $(SBIN)/condor_starter

##  When the startd starts up, it can place it's address (IP and port)
##  into a file.  This way, tools running on the local machine don't
##  need to query the central manager to find the startd.  This
##  feature can be turned off by commenting out this setting.
STARTD_ADDRESS_FILE	= $(LOG)/.startd_address

##  When a machine is claimed, how often should we poll the state of
##  the machine to see if we need to evict/suspend the job, etc?
#POLLING_INTERVAL        = 5

##  How often should the startd send updates to the central manager? 
UPDATE_INTERVAL         = 30

##  How long is the startd willing to stay in the "matched" state?
MATCH_TIMEOUT		= 30

##  How long is the startd willing to stay in the preempting/killing
##  state before it just kills the starter directly?
#KILLING_TIMEOUT	= 30

##  When a machine unclaimed, when should it run benchmarks?
##  LastBenchmark is initialized to 0, so this expression says as soon
##  as we're unclaimed, run the benchmarks.  Thereafter, if we're
##  unclaimed and it's been at least 4 hours since we ran the last
##  benchmarks, run them again.  The startd keeps a weighted average
##  of the benchmark results to provide more accurate values.
##  Note, if you don't want any benchmarks run at all, either comment
##  RunBenchmarks out, or set it to "False".
BenchmarkTimer = (CurrentTime - LastBenchmark)
RunBenchmarks : (LastBenchmark == 0 ) || ($(BenchmarkTimer) >= (4 * $(HOUR)))
#RunBenchmarks : False

##  Normally, when the startd is computing the idle time of all the
##  users of the machine (both local and remote), it checks the utmp
##  file to find all the currently active ttys, and only checks access
##  time of the devices associated with active logins.  Unfortunately,
##  on some systems, utmp is unreliable, and the startd might miss
##  keyboard activity by doing this.  So, if your utmp is unreliable,
##  set this setting to True and the startd will check the access time
##  on all tty and pty devices.
#STARTD_HAS_BAD_UTMP = False

##  This entry allows the startd to monitor console (keyboard and
##  mouse) activity by checking the access times on special files in
##  /dev.  Activity on these files shows up as "ConsoleIdle" time in
##  the startd's ClassAd.  Just give a comma-separated list of the
##  names of devices you want considered the console, without the
##  "/dev/" portion of the pathname.
CONSOLE_DEVICES	= mouse, console

##  The STARTD_EXPRS entry allows you to have the startd advertise
##  arbitrary expressions from the config file in its ClassAd.  Give
##  the comma-separated list of entries from the config file you want
##  in the startd ClassAd.
##  Note: because of the different syntax of the config file and
##  ClassAds, you might have to do a little extra work to get a given
##  entry into the ClassAd.  In particular, ClassAds require "'s
##  around your strings.  Numeric values can go in directly, as can
##  boolean expressions.  For example, if you wanted the startd to
##  advertise its list of console devices, when it's configured to run
##  benchmarks, and how often it sends updates to the central manager,
##  you'd have to define the following helper macro:
#MY_CONSOLE_DEVICES = "$(CONSOLE_DEVICES)"
##  Note: this must come before you define STARTD_EXPRS because macros
##  must be defined before you use them in other macros or
##  expressions.
##  Then, you'd set the STARTD_EXPRS setting to this:
#STARTD_EXPRS = MY_CONSOLE_DEVICES, RunBenchmarks, UPDATE_INTERVAL
##
## STARTD_EXRS and STARTD_ATTRS can be defined on a per-VM basis
## The startd builds the list of things to advertise by combining
## the the lists in this order: STARTD_EXPRS, VMx_STARTD_EXPRS, 
## STARTD_ATTRS, VMx_STARTD_ATTRS. In the below example, the startd
## ad for VM1 will have the value for favorite_color, favorite_season,
## and favorite_movie, and VM2 will have favorite_color, favorite_season,
## and favorite_song
##
#STARTD_EXPRS = favorite_color, favorite_season
#VM1_STARTD_EXRS = favorite_movie
#VM2_STARTD_EXPRS = favorite_song
##
## Attributes themselves in the STARTD_EXPRS and STARTD_ATTRS list can 
## also be on a per-VM basis.  In the below example, the startd ads will be:
## VM1 - favorite_color = "blue"; favorite_season = "spring"
## VM2 - favorite_color = "green"; favorite_season = "spring"
## VM3 - favorite_color = "blue"; favorite_season = "summer"
##
#favorite_color = "blue"
#favorite_season = "spring"
#STARTD_EXPRS = favorite_color, favorite_season
#VM2_favorite_color = "green"
#VM3_favorite_season = "summer"

#
COLLECTOR_HOST_STRING = "$(COLLECTOR_HOST)"
STARTD_EXPRS = COLLECTOR_HOST_STRING

##  When the startd is claimed by a remote user, it can also advertise
##  arbitrary attributes from the ClassAd of the job its working on.
##  Just list the attribute names you want advertised.  
##  Note: since this is already a ClassAd, you don't have to do
##  anything funny with strings, etc.  This feature can be turned off
##  by commenting out this setting (there is no default).
STARTD_JOB_EXPRS = ImageSize, ExecutableSize, JobUniverse, NiceUser

##  If you want to "lie" to Condor about how many CPUs your machine
##  has, you can use this setting to override Condor's automatic
##  computation.  If you modify this, you must restart the startd for
##  the change to take effect (a simple condor_reconfig will not do).
##  Please read the section on "condor_startd Configuration File
##  Macros" in the Condor Administrators Manual for a further
##  discussion of this setting.  Its use is not recommended.  This
##  must be an integer ("N" isn't a valid setting, that's just used to
##  represent the default).
#NUM_CPUS = N

##  If you never want Condor to detect more the "N" CPUs, uncomment this
##  line out. You must restart the startd for this setting to take 
##  effect. If set to 0 or a negative number, it is ignored. 
##  By default, it is ignored. Otherwise, it must be a positive  
##  integer ("N" isn't a valid setting, that's just used to
##  represent the default).
#MAX_NUM_CPUS = N

##  Normally, Condor will automatically detect the amount of physical
##  memory available on your machine.  Define MEMORY to tell Condor
##  how much physical memory (in MB) your machine has, overriding the
##  value Condor computes automatically.  For example:
#MEMORY = 128

##  How much memory would you like reserved from Condor?  By default,
##  Condor considers all the physical memory of your machine as
##  available to be used by Condor jobs.  If RESERVED_MEMORY is
##  defined, Condor subtracts it from the amount of memory it
##  advertises as available.
#RESERVED_MEMORY = 0

######
##  SMP startd settings
##
##  By default, Condor will evenly divide the resources in an SMP
##  machine (such as RAM, swap space and disk space) among all the
##  CPUs, and advertise each CPU as its own "virtual machine" with an
##  even share of the system resources.  If you want something other
##  than this, there are a few options available to you.  Please read
##  the section on "Configuring The Startd for SMP Machines" in the
##  Condor Administrator's Manual for full details.  The various
##  settings are only briefly listed and described here.
######

##  The maximum number of different virtual machine types.
#MAX_VIRTUAL_MACHINE_TYPES = 10

##  Use this setting to define your own virtual machine types.  This
##  allows you to divide system resources unevenly among your CPUs.
##  You must use a different setting for each different type you
##  define.  The "<N>" in the name of the macro listed below must be
##  an integer from 1 to MAX_VIRTUAL_MACHINE_TYPES (defined above),
##  and you use this number to refer to your type.  There are many
##  different formats these settings can take, so be sure to refer to
##  the section on "Configuring The Startd for SMP Machines" in the
##  Condor Administrator's Manual for full details.  In particular,
##  read the section titled "Defining Virtual Machine Types" to help
##  understand this setting.  If you modify any of these settings, you
##  must restart the condor_start for the change to take effect.
#VIRTUAL_MACHINE_TYPE_<N> = 1/4
#VIRTUAL_MACHINE_TYPE_<N> = cpus=1, ram=25%, swap=1/4, disk=1/4
#  For example:
#VIRTUAL_MACHINE_TYPE_1 = 1/8
#VIRTUAL_MACHINE_TYPE_2 = 1/4

##  If you define your own virtual machine types, you must specify how
##  many virtual machines of each type you wish to advertise.  You do
##  this with the setting below, replacing the "<N>" with the
##  corresponding integer you used to define the type above.  You can
##  change the number of a given type being advertised at run-time,
##  with a simple condor_reconfig.  
#NUM_VIRTUAL_MACHINES_TYPE_<N> = M
#  For example:
#NUM_VIRTUAL_MACHINES_TYPE_1 = 6
#NUM_VIRTUAL_MACHINES_TYPE_2 = 1

##  The number of evenly-divided virtual machines you want Condor to
##  report to your pool (if less than the total number of CPUs).  This
##  setting is only considered if the "type" settings described above
##  are not in use.  By default, all CPUs are reported.  This setting
##  must be an integer ("N" isn't a valid setting, that's just used to
##  represent the default).
#NUM_VIRTUAL_MACHINES = N

##  How many of the virtual machines the startd is representing should
##  be "connected" to the console (in other words, notice when there's
##  console activity)?  This defaults to all virtual machines (N in a
##  machine with N CPUs).  This must be an integer ("N" isn't a valid
##  setting, that's just used to represent the default).
#VIRTUAL_MACHINES_CONNECTED_TO_CONSOLE = N

##  How many of the virtual machines the startd is representing should
##  be "connected" to the keyboard (for remote tty activity, as well
##  as console activity).  Defaults to 1.
#VIRTUAL_MACHINES_CONNECTED_TO_KEYBOARD = 1

##  If there are virtual machines that aren't connected to the
##  keyboard or the console (see the above two settings), the
##  corresponding idle time reported will be the time since the startd
##  was spawned, plus the value of this parameter.  It defaults to 20
##  minutes.  We do this because, if the virtual machine is configured
##  not to care about keyboard activity, we want it to be available to
##  Condor jobs as soon as the startd starts up, instead of having to
##  wait for 15 minutes or more (which is the default time a machine
##  must be idle before Condor will start a job).  If you don't want
##  this boost, just set the value to 0.  If you change your START
##  expression to require more than 15 minutes before a job starts,
##  but you still want jobs to start right away on some of your SMP
##  nodes, just increase this parameter.
#DISCONNECTED_KEYBOARD_IDLE_BOOST = 1200

######
##  Settings for computing optional resource availability statistics:
######
##  If STARTD_COMPUTE_AVAIL_STATS = True, the startd will compute
##  statistics about resource availability to be included in the
##  classad(s) sent to the collector describing the resource(s) the
##  startd manages.  The following attributes will always be included
##  in the resource classad(s) if STARTD_COMPUTE_AVAIL_STATS = True:
##    AvailTime = What proportion of the time (between 0.0 and 1.0)
##      has this resource been in a state other than "Owner"?
##    LastAvailInterval = What was the duration (in seconds) of the
##      last period between "Owner" states?
##  The following attributes will also be included if the resource is
##  not in the "Owner" state:
##    AvailSince = At what time did the resource last leave the
##      "Owner" state?  Measured in the number of seconds since the
##      epoch (00:00:00 UTC, Jan 1, 1970).
##    AvailTimeEstimate = Based on past history, this is an estimate
##      of how long the current period between "Owner" states will
##      last.
#STARTD_COMPUTE_AVAIL_STATS = False

##  If STARTD_COMPUTE_AVAIL_STATS = True, STARTD_AVAIL_CONFIDENCE sets
##  the confidence level of the AvailTimeEstimate.  By default, the
##  estimate is based on the 80th percentile of past values.
#STARTD_AVAIL_CONFIDENCE = 0.8

##  STARTD_MAX_AVAIL_PERIOD_SAMPLES limits the number of samples of
##  past available intervals stored by the startd to limit memory and
##  disk consumption.  Each sample requires 4 bytes of memory and
##  approximately 10 bytes of disk space.
#STARTD_MAX_AVAIL_PERIOD_SAMPLES = 100

##--------------------------------------------------------------------
##  condor_schedd
##--------------------------------------------------------------------
##  Where are the various shadow binaries installed?
SHADOW_LIST = SHADOW, SHADOW_PVM, SHADOW_STANDARD
SHADOW			= $(SBIN)/condor_shadow
SHADOW_PVM		= $(SBIN)/condor_shadow.pvm
SHADOW_STANDARD		= $(SBIN)/condor_shadow.std

##  When the schedd starts up, it can place it's address (IP and port)
##  into a file.  This way, tools running on the local machine don't
##  need to query the central manager to find the schedd.  This
##  feature can be turned off by commenting out this setting.
SCHEDD_ADDRESS_FILE	= $(LOG)/.schedd_address

##  How often should the schedd send an update to the central manager?
SCHEDD_INTERVAL	= 15

##  How long should the schedd wait between spawning each shadow?
JOB_START_DELAY	= 1
JOB_START_COUNT = 5

NEGOTIATOR_INTERVAL=30

##  How often should the schedd send a keep alive message to any
##  startds it has claimed?  (5 minutes)
ALIVE_INTERVAL		= 30

##  This setting controls the maximum number of times that a
##  condor_shadow processes can have a fatal error (exception) before
##  the condor_schedd will simply relinquish the match associated with
##  the dying shadow.
#MAX_SHADOW_EXCEPTIONS	= 5

##  Estimated virtual memory size of each condor_shadow process. 
##  Specified in kilobytes.
SHADOW_SIZE_ESTIMATE	= 1800

##  The condor_schedd can renice the condor_shadow processes on your
##  submit machines.  How how "nice" do you want the shadows? (1-19).
##  The higher the number, the lower priority the shadows have.
##  This feature can be disabled entirely by commenting it out.
SHADOW_RENICE_INCREMENT	= 10

##  By default, when the schedd fails to start an idle job, it will
##  not try to start any other idle jobs in the same cluster during
##  that negotiation cycle.  This makes negotiation much more
##  efficient for large job clusters.  However, in some cases other
##  jobs in the cluster can be started even though an earlier job
##  can't.  For example, the jobs' requirements may differ, because of
##  different disk space, memory, or operating system requirements.
##  Or, machines may be willing to run only some jobs in the cluster,
##  because their requirements reference the jobs' virtual memory size
##  or other attribute.  Setting NEGOTIATE_ALL_JOBS_IN_CLUSTER to True
##  will force the schedd to try to start all idle jobs in each
##  negotiation cycle.  This will make negotiation cycles last longer,
##  but it will ensure that all jobs that can be started will be
##  started.
NEGOTIATE_ALL_JOBS_IN_CLUSTER = True

## This setting controls how often, in seconds, the schedd considers
## periodic job actions given by the user in the submit file.
## (Currently, these are periodic_hold, periodic_release, and periodic_remove.)
PERIODIC_EXPR_INTERVAL = 60

######
## Queue management settings:
######
##  How often should the schedd truncate it's job queue transaction
##  log?  (Specified in seconds, once a day is the default.)
#QUEUE_CLEAN_INTERVAL	= 86400

##  How often should the schedd commit "wall clock" run time for jobs
##  to the queue, so run time statistics remain accurate when the
##  schedd crashes?  (Specified in seconds, once per hour is the
##  default.  Set to 0 to disable.)
#WALL_CLOCK_CKPT_INTERVAL = 3600

##  What users do you want to grant super user access to this job
##  queue?  (These users will be able to remove other user's jobs). 
##  By default, this only includes root.
QUEUE_SUPER_USERS	= root, condor


##--------------------------------------------------------------------
##  condor_shadow
##--------------------------------------------------------------------
##  If the shadow is unable to read a checkpoint file from the
##  checkpoint server, it keeps trying only if the job has accumulated
##  more than MAX_DISCARDED_RUN_TIME seconds of CPU usage.  Otherwise,
##  the job is started from scratch.  Defaults to 1 hour.  This
##  setting is only used if USE_CKPT_SERVER (from above) is True.
#MAX_DISCARDED_RUN_TIME = 3600 

##  Should periodic checkpoints be compressed?
#COMPRESS_PERIODIC_CKPT = False

##  Should vacate checkpoints be compressed?
#COMPRESS_VACATE_CKPT = False

##  Should we commit the application's dirty memory pages to swap
##  space during a periodic checkpoint?
#PERIODIC_MEMORY_SYNC = False

##  Should we write vacate checkpoints slowly?  If nonzero, this
##  parameter specifies the speed at which vacate checkpoints should
##  be written, in kilobytes per second.
#SLOW_CKPT_SPEED = 0


##--------------------------------------------------------------------
##  condor_shadow.pvm
##--------------------------------------------------------------------
##  Where is the condor pvm daemon installed?
PVMD			= $(SBIN)/condor_pvmd

##  Where is the condor pvm group server daemon installed?
PVMGS			= $(SBIN)/condor_pvmgs


##--------------------------------------------------------------------
##  condor_starter
##--------------------------------------------------------------------
##  The condor_starter can renice the processes from remote Condor
##  jobs on your execute machines.  If you want this, uncomment the
##  following entry and set it to how "nice" do you want the user
##  jobs. (1-19)  The larger the number, the lower priority the
##  process gets on your machines.
##  Note on Win32 platforms, this number needs to be greater than
##  zero (i.e. the job must be reniced) or the mechanism that 
##  monitors CPU load on Win32 systems will give erratic results.
#JOB_RENICE_INCREMENT	= 10

##  Should the starter do local logging to its own log file, or send
##  debug information back to the condor_shadow where it will end up
##  in the ShadowLog? 
#STARTER_LOCAL_LOGGING	= TRUE

##  If the UID_DOMAIN settings match on both the execute and submit
##  machines, but the UID of the user who submitted the job isn't in
##  the passwd file of the execute machine, the starter will normally
##  exit with an error.  Do you want the starter to just start up the
##  job with the specified UID, even if it's not in the passwd file?
#SOFT_UID_DOMAIN	= FALSE


##--------------------------------------------------------------------
##  condor_submit
##--------------------------------------------------------------------
##  If you want condor_submit to automatically append an expression to
##  the Requirements expression or Rank expression of jobs at your
##  site, uncomment these entries.
#APPEND_REQUIREMENTS	= (expression to append job requirements)
#APPEND_RANK		= (expression to append job rank)

##  If you want expressions only appended for either standard or
##  vanilla universe jobs, you can uncomment these entries.  If any of
##  them are defined, they are used for the given universe, instead of
##  the generic entries above.
#APPEND_REQ_VANILLA	= (expression to append to vanilla job requirements)
#APPEND_REQ_STANDARD	= (expression to append to standard job requirements)
#APPEND_RANK_STANDARD	= (expression to append to vanilla job rank)
#APPEND_RANK_VANILLA	= (expression to append to standard job rank)

##  This can be used to define a default value for the rank expression
##  if one is not specified in the submit file.
#DEFAULT_RANK	        = (default rank expression for all jobs)

##  If you want universe-specific defaults, you can use the following
##  entries:
#DEFAULT_RANK_VANILLA	= (default rank expression for vanilla jobs)
#DEFAULT_RANK_STANDARD	= (default rank expression for standard jobs)

##  If you want condor_submit to automatically append expressions to
##  the job ClassAds it creates, you can uncomment and define the
##  SUBMIT_EXPRS setting.  It works just like the STARTD_EXPRS
##  described above with respect to ClassAd vs. config file syntax,
##  strings, etc.  One common use would be to have the full hostname
##  of the machine where a job was submitted placed in the job
##  ClassAd.  You would do this by uncommenting the following lines: 
#MACHINE = "$(FULL_HOSTNAME)"
#SUBMIT_EXPRS = MACHINE

## Condor keeps a buffer of recently-used data for each file an
## application opens.  This macro specifies the default maximum number
## of bytes to be buffered for each open file at the executing
## machine.
#DEFAULT_IO_BUFFER_SIZE = 524288

## Condor will attempt to consolidate small read and write operations
## into large blocks.  This macro specifies the default block size
## Condor will use.
#DEFAULT_IO_BUFFER_BLOCK_SIZE = 32768

##--------------------------------------------------------------------
##  condor_preen 
##--------------------------------------------------------------------
##  Who should condor_preen send email to?
#PREEN_ADMIN		= $(CONDOR_ADMIN)

##  What files should condor_preen leave in the spool directory?
VALID_SPOOL_FILES	= job_queue.log, job_queue.log.tmp, history, \
                          Accountant.log, Accountantnew.log, \
                          local_univ_execute, .quillwritepassword

##  What files should condor_preen remove from the log directory?
INVALID_LOG_FILES	= core

##--------------------------------------------------------------------
##  Java parameters:
##--------------------------------------------------------------------
##  If you would like this machine to be able to run Java jobs,
##  then set JAVA to the path of your JVM binary.  If you are not
##  interested in Java, there is no harm in leaving this entry
##  empty or incorrect.

JAVA	= 

##  Some JVMs need to be told the maximum amount of heap memory
##  to offer to the process.  If your JVM supports this, give
##  the argument here, and Condor will fill in the memory amount.
##  If left blank, your JVM will choose some default value,
##  typically 64 MB.  The default (-Xmx) works with the Sun JVM.

JAVA_MAXHEAP_ARGUMENT	= 

## JAVA_CLASSPATH_DEFAULT gives the default set of paths in which
## Java classes are to be found.  Each path is separated by spaces.
## If your JVM needs to be informed of additional directories, add
## them here.  However, do not remove the existing entries, as Condor
## needs them.

JAVA_CLASSPATH_DEFAULT = $(LIB) $(LIB)/scimark2lib.jar .

##  JAVA_CLASSPATH_ARGUMENT describes the command-line parameter
##  used to introduce a new classpath:

JAVA_CLASSPATH_ARGUMENT = -classpath

##  JAVA_CLASSPATH_SEPARATOR describes the character used to mark
##  one path element from another:

JAVA_CLASSPATH_SEPARATOR = :

##  JAVA_BENCHMARK_TIME describes the number of seconds for which
##  to run Java benchmarks.  A longer time yields a more accurate
##  benchmark, but consumes more otherwise useful CPU time.
##  If this time is zero or undefined, no Java benchmarks will be run.

JAVA_BENCHMARK_TIME = 2

##  If your JVM requires any special arguments not mentioned in
##  the options above, then give them here.

JAVA_EXTRA_ARGUMENTS =

##
##--------------------------------------------------------------------
##  Condor-G settings
##--------------------------------------------------------------------
##  Where is the GridManager binary installed?

GRIDMANAGER			= $(SBIN)/condor_gridmanager
GT2_GAHP			= $(SBIN)/gahp_server
GRID_MONITOR			= $(SBIN)/grid_monitor.sh

##--------------------------------------------------------------------
##  Settings that control the daemon's debugging output:
##--------------------------------------------------------------------
##
## Note that the Gridmanager runs as the User, not a Condor daemon, so 
## all users must have write permssion to the directory that the 
## Gridmanager will use for it's logfile. Our suggestion is to create a
## directory called GridLogs in $(LOG) with UNIX permissions 1777 
## (just like /tmp )
##  Another option is to use /tmp as the location of the GridManager log.
## 

MAX_GRIDMANAGER_LOG	= 1000000
GRIDMANAGER_DEBUG	= D_COMMAND

#GRIDMANAGER_LOG = $(LOG)/GridLogs/GridmanagerLog.$(USERNAME)
GRIDMANAGER_LOG = /tmp/GridmanagerLog.$(USERNAME)

##--------------------------------------------------------------------
##  Various other settings that the Condor-G can use. 
##--------------------------------------------------------------------

## For grid-type gt2 jobs (pre-WS GRAM), limit the number of jobmanager
## processes the gridmanager will let run on the headnode. Letting too
## many jobmanagers run causes severe load on the headnode.
GRIDMANAGER_MAX_JOBMANAGERS_PER_RESOURCE = 10

## If we're talking to a Globus 2.0 resource, Condor-G will use the new
## version of the GRAM protocol. The first option is how often to check the
## proxy on the submit site of things. If the GridManager discovers a new
## proxy, it will restart itself and use the new proxy for all future 
## jobs launched. In seconds,  and defaults to 10 minutes
#GRIDMANAGER_CHECKPROXY_INTERVAL = 600

## The GridManager will shut things down 3 minutes before loosing Contact
## because of an expired proxy. 
## In seconds, and defaults to 3 minutes
#GRDIMANAGER_MINIMUM_PROXY_TIME  = 180

## Condor requires that each submitted job be designated to run under a
## particular "universe". Condor-G is active when jobs are as marked as
## "GLOBUS" universe jobs. The universe of a job is set in the submit file
## with the 'universe = GLOBUS' line. 
##
## If no universe is specificed in the submit file, Condor must pick one
## for the job to use. By default, it chooses the "standard" universe. 
## The default can be overridden in the config file with the DEFAULT_UNIVERSE
## setting, which is a string to insert into a job submit description if the
## job does not try and define it's own universe
##
#DEFAULT_UNIVERSE = grid

#
# The Cred_min_time_left is the first-pass at making sure that Condor-G
# does not submit your job without it having enough time left for the 
# job to finish. For example, if you have a job that runs for 20 minutes, and
# you might spend 40 minutes in the queue, it's a bad idea to submit with less
# than an hour left before your proxy expires.
# 2 hours seemed like a reasonable default.
#
CRED_MIN_TIME_LEFT		= 120 


## 
## The GridMonitor allows you to submit many more jobs to a GT2 GRAM server
## than is normally possible.
ENABLE_GRID_MONITOR = TRUE

##
## The location of the wrapper for invoking
## Condor GAHP server
##
CONDOR_GAHP = $(SBIN)/condor_c-gahp
CONDOR_GAHP_WORKER = $(SBIN)/condor_c-gahp_worker_thread

##
## The Condor GAHP server has it's own log.  Like the Gridmanager, the
## GAHP server is run as the User, not a Condor daemon, so all users must 
## have write permssion to the directory used for the logfile. Our 
## suggestion is to create a directory called GridLogs in $(LOG) with 
## UNIX permissions 1777 (just like /tmp )
## Another option is to use /tmp as the location of the CGAHP log.
## 
MAX_C_GAHP_LOG	= 1000000

#C_GAHP_LOG = $(LOG)/GridLogs/CGAHPLog.$(USERNAME)
C_GAHP_LOG = /tmp/CGAHPLog.$(USERNAME)
C_GAHP_WORKER_THREAD_LOG = /tmp/CGAHPWorkerLog.$(USERNAME)

##
## The location of the wrapper for invoking
## GT3 GAHP server
##
GT3_GAHP = $(SBIN)/gt3_gahp

##
## The location of GT3 files. This should normally be lib/gt3
##
GT3_LOCATION = $(LIB)/gt3

##
## The location of the wrapper for invoking
## GT4 GAHP server
##
GT4_GAHP = $(SBIN)/gt4_gahp

##
## The location of GT4 files. This should normally be lib/gt4
##
GT4_LOCATION = $(LIB)/gt4

##
## gt4 gram requires a gridftp server to perform file transfers.
## If GRIDFTP_URL_BASE is set, then Condor assumes there is a gridftp
## server set up at that URL suitable for its use. Otherwise, Condor
## will start its own gridftp servers as needed, using the binary
## pointed at by GRIDFTP_SERVER. GRIDFTP_SERVER_WRAPPER points to a
## wrapper script needed to properly set the path to the gridmap file.
##
#GRIDFTP_URL_BASE = gsiftp://$(FULL_HOSTNAME)
GRIDFTP_SERVER = $(LIBEXEC)/globus-gridftp-server
GRIDFTP_SERVER_WRAPPER = $(LIBEXEC)/gridftp_wrapper.sh

##
## Location of the PBS/LSF gahp and its associated binaries
##
GLITE_LOCATION = $(LIB)/glite
PBS_GAHP = $(GLITE_LOCATION)/bin/batch_gahp
LSF_GAHP = $(GLITE_LOCATION)/bin/batch_gahp

##
## The location of the wrapper for invoking the Unicore GAHP server
##
UNICORE_GAHP = $(SBIN)/unicore_gahp

##
## The location of the wrapper for invoking the NorduGrid GAHP server
##
NORDUGRID_GAHP = $(SBIN)/nordugrid_gahp

## Condor-G and CredD can use MyProxy to refresh GSI proxies which are
## about to expire.
#MYPROXY_GET_DELEGATION = /path/to/myproxy-get-delegation

##
##--------------------------------------------------------------------
##  condor_credd credential managment daemon
##--------------------------------------------------------------------
##  Where is the CredD binary installed?
CREDD				= $(SBIN)/condor_credd

##  When the credd starts up, it can place it's address (IP and port)
##  into a file.  This way, tools running on the local machine don't
##  need an additional "-n host:port" command line option.  This
##  feature can be turned off by commenting out this setting.
CREDD_ADDRESS_FILE	= $(LOG)/.credd_address

##  Specify a remote credd server here,
#CREDD_HOST  = $(CONDOR_HOST):$(CREDD_PORT)

## CredD startup arguments
## Start the CredD on a well-known port.  Uncomment to to simplify
## connecting to a remote CredD.  Note: that this interface may change
## in a future release.
CREDD_PORT			= 9620
CREDD_ARGS			= -p $(CREDD_PORT) -f

## CredD daemon debugging log
CREDD_LOG			= $(LOG)/CredLog
CREDD_DEBUG			= D_FULLDEBUG
MAX_CREDD_LOG		= 4000000

## The credential owner submits the credential.  This list specififies
## other user who are also permitted to see all credentials.  Defaults
## to root on Unix systems, and Administrator on Windows systems.
#CRED_SUPER_USERS = 

## Credential storage location.  This directory must exist
## prior to starting condor_credd.  It is highly recommended to
## restrict access permissions to _only_ the directory owner.
CRED_STORE_DIR = $(LOCAL_DIR)/cred_dir

## Index file path of saved credentials.
## This file will be automatically created if it does not exist.
#CRED_INDEX_FILE = $(CRED_STORE_DIR/cred-index

## condor_credd  will attempt to refresh credentials when their
## remaining lifespan is less than this value.  Units = seconds.
#DEFAULT_CRED_EXPIRE_THRESHOLD = 3600

## condor-credd periodically checks remaining lifespan of stored
## credentials, at this interval.
#CRED_CHECK_INTERVAL = 60

##
##--------------------------------------------------------------------
##  Stork data placment server
##--------------------------------------------------------------------
##  Where is the Stork binary installed?
STORK				= $(SBIN)/stork_server

##  When Stork starts up, it can place it's address (IP and port)
##  into a file.  This way, tools running on the local machine don't
##  need an additional "-n host:port" command line option.  This
##  feature can be turned off by commenting out this setting.
STORK_ADDRESS_FILE = $(LOG)/.stork_address

##  Specify a remote Stork server here,
#STORK_HOST  = $(CONDOR_HOST):$(STORK_PORT)

## STORK_LOG_BASE specifies the basename for heritage Stork log files.
## Stork uses this macro to create the following output log files:
## $(STORK_LOG_BASE): Stork server job queue classad collection
## journal file.
## $(STORK_LOG_BASE).history: Used to track completed jobs.
## $(STORK_LOG_BASE).user_log: User level log, also used by DAGMan.
STORK_LOG_BASE		= $(LOG)/Stork

## Modern Condor DaemonCore logging feature.
STORK_LOG = $(LOG)/StorkLog
STORK_DEBUG = D_FULLDEBUG
MAX_STORK_LOG = 4000000

## Stork startup arguments
## Start Stork on a well-known port.  Uncomment to to simplify
## connecting to a remote Stork.  Note: that this interface may change
## in a future release.
#STORK_PORT			= 34048
STORK_PORT			= 9621
STORK_ARGS = -p $(STORK_PORT) -f -Serverlog $(STORK_LOG_BASE)

## Stork environment.  Stork modules may require external programs and
## shared object libraries.  These are located using the PATH and
## LD_LIBRARY_PATH environments.  Further, some modules may require
## further specific environments.  By default, Stork inherits a full
## environment when invoked from condor_master or the shell.  If the
## default environment is not adequate for all Stork modules, specify
## a replacement environment here.  This environment will be set by
## condor_master before starting Stork, but does not apply if Stork is
## started directly from the command line.
#STORK_ENVIRONMENT = TMP=/tmp;CONDOR_CONFIG=/special/config;PATH=/lib

## Limits the number of concurrent data placements handled by Stork.
#STORK_MAX_NUM_JOBS = 5

## Limits the number of retries for a failed data placement.
#STORK_MAX_RETRY = 5

## Limits the run time for a data placement job, after which the
## placement is considered failed.
#STORK_MAXDELAY_INMINUTES = 10

## Temporary credential storage directory used by Stork.
#STORK_TMP_CRED_DIR = /tmp

## Directory containing Stork modules.
#STORK_MODULE_DIR = $(LIBEXEC)

##
##--------------------------------------------------------------------
##  Quill Job Queue Mirroring Server
##--------------------------------------------------------------------
##  Where is the Quill binary installed and what arguments should be passed?
QUILL = $(SBIN)/condor_quill
#QUILL_ARGS =

# Where is the log file for the quill daemon?
QUILL_LOG = $(LOG)/QuillLog

# The identification and location of the quill daemon for local clients.
QUILL_ADDRESS_FILE = $(LOG)/.quill_address

# If this is set to true, then the rest of the QUILL arguments must be defined
# for quill to function. If it is Fase or left undefined, then quill will not
# be consulted by either the scheduler or the tools, but in the case of a 
# remote quill query where the local client has quill turned off, but the
# remote client has quill turned on, things will still function normally.
#QUILL_ENABLED = TRUE

# This will be the name of a quill daemon using this config file. This name
# should not conflict with any other quill name--or schedd name. 
#QUILL_NAME = quill@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx

# The Postgreql server requires usernames that can manipulate tables. This will
# be the username associated with this instance of the quill daemon mirroring
# a schedd's job queue. Each quill daemon must have a unique username 
# associated with it otherwise multiple quill daemons will corrupt the data
# held under an indentical user name.
#QUILL_DB_NAME = name_of_db

# The required password for the DB user which quill will use to read 
# information from the database about the queue.
#QUILL_DB_QUERY_PASSWORD = foobar

# The machine and port of the postgres server.
#QUILL_DB_IP_ADDR = machine.domain.com:5432

# Polling period, in seconds, for when quill reads transactions out of the
# schedd's job queue log file and puts them into the database.
#QUILL_POLLING_PERIOD = 10

# Number of days that historical information about previous jobs will be kept.
# It defaults to 180 days
#QUILL_HISTORY_DURATION  = 180

# Number of hours between scans of QUILL_HISTORY_DURATION.
#QUILL_HISTORY_CLEANING_INTERVAL = 24

# Allows or disallows a remote query to the quill daemon and database
# which is reading this log file. Defaults to true.
#QUILL_IS_REMOTELY_QUERYABLE = TRUE

# Add debugging flags to here if you need to debug quill for some reason.
#QUILL_DEBUG = D_FULLDEBUG
CONDOR_HOST=gdx-184.orsay.grid5000.fr
CONDOR_HOST=pastel-72.toulouse.grid5000.fr