Mailing List Archives
Authenticated access
|
|
|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Condor-users] condor 7.0.3 or 7.1.0 STARTD and/or COLLECTOR die with signal 8 (Floating point exception)
- Date: Fri, 27 Jun 2008 14:45:35 +0200
- From: Alexandru Munteanu <munteanu@xxxxxxxxxxxxxxxx>
- Subject: Re: [Condor-users] condor 7.0.3 or 7.1.0 STARTD and/or COLLECTOR die with signal 8 (Floating point exception)
On 13:40 Fri 27 Jun , Simon Hammond wrote:
> Have you selected the same distribution file for each O/S? We had a similar
> problem when we tried to use Condor RedHat Ent. 4 on a RedHat Ent 3 box.
Thank you for the quick reply.
I have just downloaded 'condor-7.1.0-linux-x86-debian40.tar.gz',
which was one of the 'closest' binaries for the debian-based distributions
(though it also worked on gentoo).
I will try to compile the source and see if it works.
--
Alex
> Si Hammond
> High Performance Systems Group
> University of Warwick
>
> 2008/6/27 Alexandru Munteanu <munteanu@xxxxxxxxxxxxxxxx>:
>
> > Hello,
> >
> > I set up the debian static condor version 7.0.3 x86 on 4 machines having
> > the
> > following GNU/Linux distributions installed :
> >
> > 1) gentoo x86_64
> > 2) current debian testing x86_64
> > 3) sidux x86_64 (a debian-based distribution)
> > 4) ubuntu gutsy x86_64
> >
> > As far as I know, machine 3) and 4) have almost the same hardware.
> >
> > Condor works very well with machines 1, 2 and 3, but when I test it on
> > machine 4), I get 'Floating point exception's on the COLLECTOR and STARTD.
> >
> > Here is the error I have on STARTD :
> >
> > ==> local.micheline/log/MasterLog <==
> > 6/27 14:00:59 The STARTD (pid 3163) died due to signal 8 (Floating point
> > exception)
> > 6/27 14:00:59 Sending obituary for
> > "/home/condor/condor-7.1.0/sbin/condor_startd"
> > 6/27 14:00:59 restarting /home/condor/condor-7.1.0/sbin/condor_startd in
> > 11 seconds
> > 6/27 14:01:10 Started DaemonCore process
> > "/home/condor/condor-7.1.0/sbin/condor_startd", pid and pgroup = 3189
> >
> > I have also tried with version 7.1.0 and I get the same error.
> >
> > Any idea why I get this error ?
> >
> > Please tell me what do you need as extra information or how to debug it.
> >
> > Thank you.
> >
> > Best regards,
> > --
> > Alexandru Munteanu
> >
> > _______________________________________________
> > Condor-users mailing list
> > To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a
> > subject: Unsubscribe
> > You can also unsubscribe by visiting
> > https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> >
> > The archives can be found at:
> > https://lists.cs.wisc.edu/archive/condor-users/
> >
> _______________________________________________
> Condor-users mailing list
> To unsubscribe, send a message to condor-users-request@xxxxxxxxxxx with a
> subject: Unsubscribe
> You can also unsubscribe by visiting
> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
>
> The archives can be found at:
> https://lists.cs.wisc.edu/archive/condor-users/
--
Alexandru Munteanu