Re: [Condor-users] Condor View Help

[rnayar@xxxxxxxx]

Junwei I actually used that page to install it. Can you please look at what I 
did to see if I did anything stupid?

thanks

Danny


Quoting Junwei Cao <jcao@xxxxxxxxxxxx>:

> I wrote a page:
> 
> http://www.lsc-group.phys.uwm.edu/lscdatagrid/doc/condorview.html
> 
> of instructions when I deployed the CondorView for my Condor pool. Some
> tips:
> 
> 1. make sure you fully restart Condor so new configurations are applied.
> 2. check the pool history dir and files in it should not be empty
> 3. check error messages in the Condor collector log files of both main and
> CondorView server hosts
> 
> --Junwei
> ------------------------------------------
> Junwei Cao | Research Scientist | MIT-LIGO
> ------------------------------------------
> 
> On Thu, 23 Feb 2006 rnayar@xxxxxxxx wrote:
> 
> > Hello all I'm having a slight difficulty setting up the Condor view Module
> if
> > anyone can help me out it would be great. So far here is my set up.
> >
> > I have two machines
> > Manager - panndaa
> > Node1 - gutti
> >
> > Since I only have two nodes and the Manager cannot be the Condor View
> server I
> > decided to make gutti the Server and people will be able to view web stats
> from
> > this node as well.
> >
> > I edited gutti's local config file and included the following:
> >
> > POOL_HISTORY_DIR =/home/condor/history
> > KEEP_POOL_HISTORY = True
> > VIEW_SERVER = /home/condor/condor/sbin/condor_collector
> > DAEMON_LIST = MASTER, STARTD, SCHEDD, VIEW_SERVER
> >
> > Now gutti will have a collector daemon running in the background as well
> >
> > Next I edited the global config file that they both use and included the
> following:
> >
> > CONDOR_VIEW_HOST = gutti.nmsu.edu
> >
> > I then downloaded the module and unpacked it into gutti's /var/www/html
> directory
> >
> > Next I edited the make_stats file and adjusted the parameters as follows:
> >
> > ORGNAME="Meow Mix INC"
> > CONDORADMIN="condor@xxxxxxxxxxxxxxxx"
> > POOL="gutti.nmsu.edu"
> > VIEWDIR="/var/www/html/"
> > STATSDIR="/home/condor/condor/bin"
> > PATH=/bin:/usr/bin:$STATSDIR:/s/std/bin
> >
> > Now when I run the command ./make_stats setup it doesn't do anything. I've
> been
> >  racking my brain at this for quite some time so if anyone sees what i did
> wrong
> > please let me know thanks!
> >
> > Danny
> > _______________________________________________
> > Condor-users mailing list
> > Condor-users@xxxxxxxxxxx
> > https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> >
> _______________________________________________
> Condor-users mailing list
> Condor-users@xxxxxxxxxxx
> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
>