Re: [Condor-users] [Globus-discuss] Problem in Job Submission to Condor through GT4

[Peter G Lane <lane@xxxxxxxxxxx>]

Senthil,

Thanks for your participation in working the bugs out of the update
packages.  I'm glad it's working now.

Peter

On Tue, 2005-10-18 at 11:16 -0400, Natarajan, Senthil wrote:
> Peter,
> Now the problem has been solved.
> Thanks lot for your help and I would really appreciate your time and
> effort.
> 
> All your packages and patches helped globus to submit the correct job
> description to the condor. Dan helped me in debugging condor and he also
> suggested not using transfer_output_files tag. From the log I found XML
> Job description is pointing to a directory, which condor doesn't like it
> for some reason.  I fixed that and removed the transfer_output_file tag
> now it is working fine.
> 
> I am also attaching the working XML Job description.
> 
> Once again thanks lot Peter and Dan.
> 
> Thanks,
> Senthil
> 
> -----Original Message-----
> From: Peter G Lane [mailto:lane@xxxxxxxxxxx] 
> Sent: Thursday, October 13, 2005 7:39 PM
> To: Natarajan, Senthil
> Cc: discuss@xxxxxxxxxx; Dan Bradley; condor-users@xxxxxxxxxxx
> Subject: RE: [Globus-discuss] Problem in Job Submission to Condor
> through GT4
> 
> On Thu, 2005-10-13 at 19:23 -0400, Natarajan, Senthil wrote:
> > Peter,
> > 
> > Actually even I read about this long back, and thought about it and I
> did tried to submit the job by removing (commenting) the
> "transfer_output_file" tags, in the morning before sending you mail but
> no luck.
> > 
> 
> I'm out of ideas, then.  If the correct directives are making it into
> the Condor job description, then I'm clueless.  I'd need some input from
> one of the Condor guys to know if there's anything else missing in our
> extensions support.
> 
> Peter
> 
> > Thanks,
> > 
> > Senthil
> > 
> > ________________________________
> > 
> > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > Sent: Thu 10/13/2005 5:18 PM
> > To: Natarajan, Senthil
> > Cc: discuss@xxxxxxxxxx; Dan Bradley; condor-users@xxxxxxxxxxx
> > Subject: RE: [Globus-discuss] Problem in Job Submission to Condor
> through GT4
> > 
> > 
> > 
> > On Thu, 2005-10-13 at 11:49 -0400, Natarajan, Senthil wrote:
> > > Peter,
> > > I applied the patch and corrected the XML Job description to
> > > "transfer_output_files" and changed to absolute path. Then I
> submitted
> > > the Job.
> > > Here is what's happening.
> > > 1) It is just a simple shell script job as I attached in the
> previous
> > > mail, suppose to take  only 30 sec since my argument is 30.
> > > 2) But it is running continuously, meaning condor runs this job for
> ~ 3
> > > mins then go back to idle after some ~ 2 or 3 mins it runs the job
> until
> > > my grid credential proxy expires then globus destroys the job.
> > > 3) What's happening is, condor execute the job in an execute machine
> in
> > > a temp directory say dir_15264 under execute directory and creates
> the
> > > output file called _condor_stdout_214.0
> > > 4) In the Globus XML Job description we mentioned to copy the file
> > > /home/senthil/ stdout.j3, I guess Globus informs condor that after
> > > finishing the job, copy the output file named
> (/home/senthil/stdout.j3)
> > > and condor assumes this job will produce this file and keep on
> running
> > > the job until it sees the output file globus mentioned. So I believe
> > > here the problem is the communication gap between Globus and condor.
> > > Globus doesn't know what file condor creates, (if we know that we
> can
> > > specify that file in the job description. ) and condor is not
> informing
> > > the Globus what file it created.
> > > 5) If the job directly submitted to the condor, it know what file it
> > > creates and copies that file back to the job submitted machine.
> > > Here I am CC this mail to our friend Dan Bradely from Wisconsin
> (Condor
> > > person) also, hope if he know something he will help us.
> > 
> > A Google search on "condor transfer_output_files" turned this up:
> > 
> > "WARNING: Do not specify transfer_output_file in the submit
> description
> > file unless there is a really good reason - it is best to let Condor
> > figure things out by itself based upon what the job."
> > 
> > This is from the following URL:
> > 
> > http://www.caenn.wisc.edu/manuals/condor6/5_2Release_Notes.html
> > 
> > Does it work if you simply remove the transfer_output_files elements?
> > 
> > Peter
> > 
> > P.S. to any Condor guys reading this, it looks like there's a typo
> > ("transfer_output_file" should be "transfer_output_file"?).
> > 
> > >
> > > Thanks,
> > > Senthil
> > >
> > >
> > > Note:
> > > Here I am also attaching the condor.pm and the logfile dump.
> > >
> > >
> > > -----Original Message-----
> > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > Sent: Wednesday, October 12, 2005 3:26 PM
> > > To: Natarajan, Senthil
> > > Cc: discuss@xxxxxxxxxx; condor-users@xxxxxxxxxxx
> > > Subject: RE: [Globus-discuss] Problem in Job Submission to Condor
> > > through GT4
> > >
> > > Attached is a patch for your condor.pm.  There is also a new update
> > > package for anyone else who's following along.  You should change
> > > "transfer_output_file" to "transfer_output_files" in your XML job
> > > description.  Also, mine hung on Pending (condor_q listed the two
> jobs
> > > with status 'I') unless I made the transfer_output_files values
> absolute
> > > paths.
> > >
> > > Peter
> > >
> > > On Wed, 2005-10-12 at 12:37 -0600, Peter G Lane wrote:
> > > > On Wed, 2005-10-12 at 10:20 -0400, Natarajan, Senthil wrote:
> > > > > Peter,
> > > > > I ran ./setup-globus-job-manager-condor, it updated the
> condor.pm.
> > > > > But still the output file is not copied back to the submitted
> > > machine.
> > > >
> > > > The directives are definitely making it into your condor job
> > > > description.  I even dumped the condor job description myself
> right
> > > > before it's submitted and verified this.
> > > >
> > > > Now then, I went back and read the condor documentation and it
> looks
> > > > like there is a typo in what I was given for one of the directive
> > > names:
> > > >
> > > > http://bugzilla.globus.org/bugzilla/show_bug.cgi?id=3773#c1
> > > >
> > > > It looks like it should be "transfer_output_files" not
> > > > "transfer_output_file".  I'm not sure why Condor doesn't complain
> > > about
> > > > this, though.  It seems like it'd be a good idea.  Anyway, I'll
> fix
> > > this
> > > > and give you a patch rather than making you download a new update
> > > > package (although I'll obviously make one).
> > > >
> > > > >
> > > > > I was wondering is this problem is happening only with GT4, or
> even
> > > the
> > > > > older version of Globus has it.
> > > >
> > > > Considering these are the exact same Perl modules sans GT4
> updates,
> > > GT2
> > > > shouldn't have been able to do this without hacking the condor.pm
> > > > either.
> > > >
> > > > >  Then how the people are really
> > > > > submitting the Jobs to Globus to run on Condor pool?
> > > >
> > > > Either they aren't staging anything or the nodes of the pool share
> a
> > > > file system with the node that GRAM is installed on.
> > > >
> > > > > Is that I am the only person having this problem?
> > > >
> > > > No, but others have opted for just hacking the condor.pm like you
> did.
> > > >
> > > > > Is there any way we can get this done, all I am trying is I have
> a
> > > > > simple shell script it sleeps and prints counter value in the
> output
> > > > > file. I want that output file copied back, from the executing
> > > machine to
> > > > > job submitted machine.(condor does this if I directly submit to
> > > condor
> > > > > pool but not through Globus)
> > > >
> > > > I apologize that this is taking so long.  I hope I made it clear
> that
> > > > this is development code.  I think we're one step away from
> getting
> > > this
> > > > to work, though.  I appreciate you hanging in there.
> Unfortunately
> > > all
> > > > our Condor installations have shared file systems, so it's hard
> for us
> > > > to test this sort of thing without wonderful people like you. :)
> > > >
> > > > >
> > > > > Here I am attaching the
> > > > > 1) condor.pm.
> > > > > 2) Shell Script (My test job)
> > > > > 3) XML Job description
> > > > > 4) logfile dump
> > > > > 5) condor job description file (analogous to the Globus XML Job
> > > > > description)
> > > > > 6) output file got when I ran the same job by directly
> submitting to
> > > the
> > > > > condor pool.
> > > > >
> > > > > Could any one please help me on this.
> > > > > Thanks,
> > > > > Senthil
> > > > >
> > > > >
> > > > > -----Original Message-----
> > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > Sent: Tuesday, October 11, 2005 6:13 PM
> > > > > To: Natarajan, Senthil
> > > > > Cc: discuss@xxxxxxxxxx
> > > > > Subject: RE: [Globus-discuss] Problem in Job Submission to
> Condor
> > > > > through GT4
> > > > >
> > > > > On Tue, 2005-10-11 at 17:18 -0400, Natarajan, Senthil wrote:
> > > > > > Peter,
> > > > > > Any way I rebuild all the 4 packages with the force option but
> > > still
> > > > > > having the same problem. I noticed (update time) the
> > > > > > $GLOBUS_LOCATION/lib/perl/Globus/GRAM/JobManager/condor.pm was
> not
> > > > > > modified by any of these package rebuild still showing the old
> > > date
> > > > > and
> > > > > > time.
> > > > >
> > > > > I looked over the post install instructions that I gave you and
> > > noticed
> > > > > I block copied the wrong setup script from my directory listing,
> > > sorry
> > > > > about that.  It should have been
> setup-globus-job-manager-condor.
> > > > > Here's a dump of what I just did to verify that the condor.pm
> was
> > > being
> > > > > updated:
> > > > >
> > > > > % ls -l
> $GLOBUS_LOCATION/lib/perl/Globus/GRAM/JobManager/condor.pm
> > > > > -rw-r--r--  1 lane lane 17K Oct 10
> > > > > 12:05
> > > > >
> > >
> /usr/local/globus/globus-4.0.1/lib/perl/Globus/GRAM/JobManager/condor.pm
> > > > > % cd $GLOBUS_LOCATION/setup/globus/
> > > > > % ./setup-globus-job-manager-condor
> > > > > checking for condor_submit...
> /opt/condor-6.7.6/bin/condor_submit
> > > > > checking for condor_rm... /opt/condor-6.7.6/bin/condor_rm
> > > > > find-condor-tools: creating ./config.status
> > > > > config.status: creating condor.pm
> > > > > config.status: creating globus-condor-print-config
> > > > > % ls -l
> $GLOBUS_LOCATION/lib/perl/Globus/GRAM/JobManager/condor.pm
> > > > > -rw-r--r--  1 lane lane 17K Oct 11
> > > > > 16:06
> > > > >
> > >
> /usr/local/globus/globus-4.0.1/lib/perl/Globus/GRAM/JobManager/condor.pm
> > > > >
> > > > > Peter
> > > > >
> > > > > >
> > > > > > Please find the attached condor.pm (after all 4 packages
> forceful
> > > > > > rebuild) and the logfile dump.
> > > > > >
> > > > > > Here is package build.
> > > > > >
> > > > > > [globus@gis14 globus-4.0.1]$ gpt-build --force
> > > > > > globus_wsrf_gram_service_java-0.78.tar.gz gcc32dbg
> > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES FOR
> > > > > > globus_wsrf_gram_service_java
> > > > > > gpt-build ====> Changing to
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > a-0.78.0/
> > > > > > gpt-build ====> BUILDING globus_wsrf_gram_service_java
> > > > > > gpt-build ====> Changing to
> > > > > /usr/local/GridComputing/globus-4.0.1/BUILD
> > > > > > gpt-build ====> REMOVING empty package
> > > > > > globus_wsrf_gram_service_java-noflavor-dev
> > > > > > gpt-build ====> REMOVING empty package
> > > > > > globus_wsrf_gram_service_java-noflavor-rtl
> > > > > > [globus@gis14 globus-4.0.1]$ gpt-build --force
> > > > > > globus_scheduler_event_generator-1.0.tar.gz gcc32dbg
> > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES FOR
> > > > > > globus_scheduler_event_generator
> > > > > > gpt-build ====> Changing to
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_scheduler_event_gener
> > > > > > ator-1.0/
> > > > > > gpt-build ====> BUILDING FLAVOR gcc32dbg
> > > > > > gpt-build ====> Changing to
> > > > > /usr/local/GridComputing/globus-4.0.1/BUILD
> > > > > > gpt-build ====> REMOVING empty package
> > > > > > globus_scheduler_event_generator-gcc32dbg-pgm_static
> > > > > > gpt-build ====> REMOVING empty package
> > > > > > globus_scheduler_event_generator-noflavor-data
> > > > > > gpt-build ====> REMOVING empty package
> > > > > > globus_scheduler_event_generator-noflavor-doc
> > > > > > [globus@gis14 globus-4.0.1]$ gpt-build --force
> > > > > > globus_gram_job_manager-7.7.tar.gz gcc32dbg
> > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES FOR
> > > > > globus_gram_job_manager
> > > > > > gpt-build ====> Changing to
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager-7.7/
> > > > > > gpt-build ====> BUILDING FLAVOR gcc32dbg
> > > > > > gpt-build ====> Changing to
> > > > > /usr/local/GridComputing/globus-4.0.1/BUILD
> > > > > > gpt-build ====> REMOVING empty package
> > > > > > globus_gram_job_manager-gcc32dbg-dev
> > > > > > gpt-build ====> REMOVING empty package
> > > > > > globus_gram_job_manager-gcc32dbg-pgm_static
> > > > > > gpt-build ====> REMOVING empty package
> > > > > > globus_gram_job_manager-gcc32dbg-rtl
> > > > > > [globus@gis14 globus-4.0.1]$ gpt-build --force
> > > > > > globus_gram_job_manager_setup_condor-2.9.tar.gz gcc32dbg
> > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES FOR
> > > > > > globus_gram_job_manager_setup_condor
> > > > > > gpt-build ====> Changing to
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > p_condor-2.9/
> > > > > > gpt-build ====> BUILDING globus_gram_job_manager_setup_condor
> > > > > > gpt-build ====> Changing to
> > > > > /usr/local/GridComputing/globus-4.0.1/BUILD
> > > > > > gpt-build ====> REMOVING empty package
> > > > > > globus_gram_job_manager_setup_condor-noflavor-data
> > > > > > gpt-build ====> REMOVING empty package
> > > > > > globus_gram_job_manager_setup_condor-noflavor-dev
> > > > > > gpt-build ====> REMOVING empty package
> > > > > > globus_gram_job_manager_setup_condor-noflavor-doc
> > > > > > gpt-build ====> REMOVING empty package
> > > > > > globus_gram_job_manager_setup_condor-noflavor-pgm_static
> > > > > > gpt-build ====> REMOVING empty package
> > > > > > globus_gram_job_manager_setup_condor-noflavor-rtl
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > -----Original Message-----
> > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > Sent: Tuesday, October 11, 2005 3:34 PM
> > > > > > To: Natarajan, Senthil
> > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > Subject: RE: [Globus-discuss] Problem in Job Submission to
> Condor
> > > > > > through GT4
> > > > > >
> > > > > > I think the other ones are good.  The extension handler seems
> to
> > > > > working
> > > > > > appropriately.  All you need is the
> > > > > > globus_gram_job_manager_setup_condor-2.9 package to interpret
> the
> > > > > values
> > > > > > that the extension handler is setting up for you.
> > > > > >
> > > > > > Peter
> > > > > >
> > > > > > On Tue, 2005-10-11 at 14:39 -0400, Natarajan, Senthil wrote:
> > > > > > > Peter,
> > > > > > > You mean to install those 4 packages only right with the
> --force
> > > > > > option?
> > > > > > > Thanks,
> > > > > > > Senthil
> > > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > Sent: Tuesday, October 11, 2005 2:36 PM
> > > > > > > To: Natarajan, Senthil
> > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > Subject: RE: [Globus-discuss] Problem in Job Submission to
> > > Condor
> > > > > > > through GT4
> > > > > > >
> > > > > > > Yeah, as I expected the code to put those directives in the
> > > condor
> > > > > job
> > > > > > > description are missing.  I also see your custom additions,
> so
> > > you
> > > > > > > probably just need to force a rebuild.  Try gpt-build again
> with
> > > the
> > > > > > > --force option followed by the instructions I gave you last
> time
> > > for
> > > > > > > redoing the post install steps.  If that still doesn't work,
> > > capture
> > > > > > > your session trying to build it and send it back to the
> list.
> > > For
> > > > > > some
> > > > > > > reason that condor update package isn't being installed.
> > > > > > >
> > > > > > > Peter
> > > > > > >
> > > > > > > On Tue, 2005-10-11 at 09:34 -0400, Natarajan, Senthil wrote:
> > > > > > > > Peter,
> > > > > > > > Here I attached the condor.pm.
> > > > > > > > I just followed your instruction to install those 4
> packages
> > > > > > > > (using gpt-build). Please let me know whether it has been
> > > properly
> > > > > > > > installed or what needs to be done.
> > > > > > > > Thanks,
> > > > > > > > Senthil
> > > > > > > >
> > > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > Sent: Monday, October 10, 2005 4:22 PM
> > > > > > > > To: Natarajan, Senthil
> > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > Subject: RE: [Globus-discuss] Problem in Job Submission to
> > > Condor
> > > > > > > > through GT4
> > > > > > > >
> > > > > > > > On Mon, 2005-10-10 at 15:26 -0400, Natarajan, Senthil
> wrote:
> > > > > > > > > Peter,
> > > > > > > > > I ran. /setup-globus-scheduler-provider-condor
> > > > > > > > > Then I corrected the typo WhenToTransferFiles to
> > > > > > > WhenToTransferOutput.
> > > > > > > > > Then I submitted the job, but still it is not copying
> the
> > > output
> > > > > > > file
> > > > > > > > > back to the submitted machine. I guess since condor is
> > > running
> > > > > the
> > > > > > > job
> > > > > > > > > in some tmp execute directory in some other machine,
> globus
> > > > > don't
> > > > > > > know
> > > > > > > > > about that (some kind of communication is missing
> between
> > > condor
> > > > > > and
> > > > > > > > > globus) machine and directory, so it is not copying
> back.
> > > > > > > > >
> > > > > > > > > When you tried did your job ran in your job submitted
> > > machine
> > > > > > itself
> > > > > > > > or
> > > > > > > > > in other machine?
> > > > > > > >
> > > > > > > > I only have a local, single-machine installation of Condor
> > > that I
> > > > > > test
> > > > > > > > with.  All I do is make sure the correct directives are in
> the
> > > > > > Condor
> > > > > > > > job description.  If I can verify that the directives are
> > > being
> > > > > > > appended
> > > > > > > > and it doesn't work, then it's a Condor issue.  I know the
> > > > > > directives
> > > > > > > > are being written because Condor complains if I submit
> your
> > > job
> > > > > > > > description with the typo (i.e. it complains that it has
> > > > > > > > should_transfer_files but not WhenToTransferOutput.
> Fixing
> > > the
> > > > > typo
> > > > > > > > prevents Condor from complaining).
> > > > > > > >
> > > > > > > > >
> > > > > > > > > With out running the
> setup-globus-scheduler-provider-condor
> > > and
> > > > > > > > > modifying WhenToTransferFiles  to WhenToTransferOutput,
> I
> > > ran
> > > > > the
> > > > > > > job
> > > > > > > > on
> > > > > > > > > Friday , It was copying the file back if the job is
> running
> > > in
> > > > > the
> > > > > > > > same
> > > > > > > > > machine as the job submitted machine.
> > > > > > > > >
> > > > > > > > > I was curious did you test on the same machine (job
> > > submission
> > > > > and
> > > > > > > > > execution in the same machine) or you submitted the job
> in
> > > one
> > > > > > > machine
> > > > > > > > > and it ran on different machine?
> > > > > > > > >
> > > > > > > > > Please let me know.
> > > > > > > > > Here I am again attaching the logfile dump and the XML
> Job
> > > > > > > > description.
> > > > > > > > > Thanks,
> > > > > > > > > Senthil
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Note:
> > > > > > > > > In order to run the condor job, I added these lines. In
> > > > > > > > >
> $GLOBUS_LOCATION/lib/perl/Globus/GRAM/JobManager/condor.pm
> > > (in
> > > > > > line
> > > > > > > > > 280)
> > > > > > > > >
> > > > > > > > > print SCRIPT_FILE "should_transfer_files = IF_NEEDED\n";
> > > > > > > > > print SCRIPT_FILE "WhenToTransferOutput = ON_EXIT\n";
> > > > > > > > > print SCRIPT_FILE "transfer_files = ONEXIT\n";
> > > > > > > >
> > > > > > > > Like I said before, this is exactly what I add if the
> updated
> > > > > condor
> > > > > > > > package is installed properly.  Can you send me the
> following
> > > > > file:
> > > > > > > >
> > > > > > > > $GLOBUS_LOCATION/lib/perl/Globus/GRAM/JobManager/condor.pm
> > > > > > > >
> > > > > > > > I really don't think the updated condor.pm got installed.
> > > > > > Everything
> > > > > > > > else looks fine.  I'm just not seeing output from the
> > > condor.pm
> > > > > > module
> > > > > > > > that indicates that it is putting these lines in the
> Condor
> > > job
> > > > > > > > description.  You should be seeing something likes this:
> > > > > > > >
> > > > > > > > Mon Oct 10 12:18:22 2005 JM_SCRIPT: Using jm supplied job
> > > > > > > > dir:
> /home/lane/.globus/3cf6d2c0-39ba-11da-99c3-9071bceca9ea
> > > > > > > > Mon Oct 10 12:18:22 2005 JM_SCRIPT: Adding
> > > "should_transfer_files
> > > > > =
> > > > > > > YES"
> > > > > > > > Mon Oct 10 12:18:22 2005 JM_SCRIPT: Adding
> > > "WhenToTransferOutput =
> > > > > > > > ON_EXIT"
> > > > > > > >  Mon Oct 10 12:18:22 2005 JM_SCRIPT: Adding
> > > "transfer_output_file
> > > > > =
> > > > > > > > stdout.j3, stderr.j3"  Mon Oct 10 12:18:22 2005 JM_SCRIPT:
> > > About
> > > > > to
> > > > > > > > submit condor job
> > > > > > > >
> > > > > > > > That's straight out of my logfile after I installed the
> same
> > > > > package
> > > > > > > > that is on the web site and ran your corrected job
> > > description.
> > > > > > > >
> > > > > > > > Peter
> > > > > > > >
> > > > > > > > >
> > > > > > > > > If I remove these line still the jobs are not
> running.(i.e.
> > > it
> > > > > is
> > > > > > > not
> > > > > > > > > finding the HasTranferFile attribute in the requirement
> > > > > > expression)
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > > Sent: Monday, October 10, 2005 2:21 PM
> > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > Subject: RE: [Globus-discuss] Problem in Job Submission
> to
> > > > > Condor
> > > > > > > > > through GT4
> > > > > > > > >
> > > > > > > > > I think the problem is that I neglected to tell you to
> > > re-run
> > > > > gpt-
> > > > > > > > > postinstall with the --force option.  You should also be
> > > able to
> > > > > > cd
> > > > > > > to
> > > > > > > > > $GLOBUS_LOCATION/setup/globus and run
> > > './setup-globus-scheduler-
> > > > > > > > > provider-condor'.  The later is much quicker.
> > > > > > > > >
> > > > > > > > > Also, WhenToTransferFiles should be
> WhenToTransferOutput.
> > > > > Fixing
> > > > > > > this
> > > > > > > > > typo in your job description and changing it for my
> system
> > > ran
> > > > > > just
> > > > > > > > fine
> > > > > > > > > for me.
> > > > > > > > >
> > > > > > > > > Peter
> > > > > > > > >
> > > > > > > > > On Mon, 2005-10-10 at 13:08 -0400, Natarajan, Senthil
> wrote:
> > > > > > > > > > Peter,
> > > > > > > > > > Here I attached the logfile dump and my XML job
> > > description.
> > > > > > > > > > Still it is not copying the output file back to the
> job
> > > > > > submitted
> > > > > > > > > > machine if the job runs on different machine. But if
> the
> > > job
> > > > > > runs
> > > > > > > on
> > > > > > > > > the
> > > > > > > > > > same machine it copies the output file.
> > > > > > > > > > Please let me know.
> > > > > > > > > >
> > > > > > > > > > Sorry, I couldn't get back to you. Actually I was out
> for
> > > more
> > > > > > > than
> > > > > > > > > > couple of days to attend the Grid Conference in
> Boston; I
> > > did
> > > > > > meet
> > > > > > > > > your
> > > > > > > > > > colleagues.
> > > > > > > > > > Thanks,
> > > > > > > > > > Senthil
> > > > > > > > > >
> > > > > > > > > > 
> > > > > > > > > >
> > > > > > > > > > -----Original Message-----
> > > > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > > > Sent: Thursday, September 29, 2005 3:53 PM
> > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > Subject: RE: [Globus-discuss] Problem in Job
> Submission to
> > > > > > Condor
> > > > > > > > > > through GT4
> > > > > > > > > >
> > > > > > > > > > On Thu, 2005-09-29 at 14:26 -0400, Natarajan, Senthil
> > > wrote:
> > > > > > > > > > > Peter,
> > > > > > > > > > > I changed the
> > > > > > > > > >
> $GLOBUS_LOCATION/lib/perl/Globus/GRAM/ExtensionsHandler.pm
> > > > > > > > > > > file according to your suggestion and I didn't get
> that
> > > > > parser
> > > > > > > > > error.
> > > > > > > > > > I
> > > > > > > > > > > submitted the job the job successfully executed but
> it
> > > > > didn't
> > > > > > > copy
> > > > > > > > > the
> > > > > > > > > > > output file back to the submitted machine (i.e our
> main
> > > > > > problem
> > > > > > > > and
> > > > > > > > > we
> > > > > > > > > > > are working on to solve that).
> > > > > > > > > > >
> > > > > > > > > > > I am pretty sure that what ever we are specifying
> under
> > > the
> > > > > > > > > extensions
> > > > > > > > > > > tag, globus is not recognizing it or it is not doing
> > > > > anything
> > > > > > > with
> > > > > > > > > > that.
> > > > > > > > > > > Because....
> > > > > > > > > > >
> > > > > > > > > > > i) Initially I had problem in executing the job
> itself,
> > > > > (i.e.)
> > > > > > > as
> > > > > > > > > soon
> > > > > > > > > > > as I submitted the job to globus, globus in turn
> submits
> > > the
> > > > > > job
> > > > > > > > to
> > > > > > > > > > the
> > > > > > > > > > > condor pool. And the jobs are idle and not running
> bcos
> > > of
> > > > > the
> > > > > > > job
> > > > > > > > > > > requirement.
> > > > > > > > > > > Requirements = (OpSys == "LINUX" && Arch == "INTEL")
> &&
> > > > > (Disk
> > > > > > >=
> > > > > > > > > > > DiskUsage) && ((Memory * 1024) >= ImageSize) &&
> > > > > > > > > > (TARGET.FileSystemDomain
> > > > > > > > > > > == MY.FileSystemDomain)
> > > > > > > > > > > The problem here is, there is no HasFileTransfer
> option
> > > in
> > > > > the
> > > > > > > > > > > requirement expression. In order to fix this I added
> the
> > > > > > > following
> > > > > > > > > two
> > > > > > > > > > > lines in the file
> > > > > > > > > > >
> > > $GLOBUS_LOCATION/lib/perl/Globus/GRAM/JobManager/condor.pm
> > > > > > > > > > > print SCRIPT_FILE "should_transfer_files =
> IF_NEEDED\n";
> > > > > > > > > > > print SCRIPT_FILE "WhenToTransferOutput =
> ON_EXIT\n";
> > > > > > > > > > > This fixed the job execution problem, but not
> copying
> > > the
> > > > > file
> > > > > > > > back
> > > > > > > > > to
> > > > > > > > > > > the submitted machine.
> > > > > > > > > >
> > > > > > > > > > This is exactly what I added to the Condor job
> description
> > > > > based
> > > > > > > on
> > > > > > > > > the
> > > > > > > > > > extensions.  What you can do is add an extension
> element
> > > > > before
> > > > > > > all
> > > > > > > > > the
> > > > > > > > > > other extension elements to write a log file which
> dumps
> > > some
> > > > > > > useful
> > > > > > > > > > debugging info:
> > > > > > > > > >
> > > > > > > > > > <extensions>
> > > > > > > > > >         <logfile>/home/me/logfile</logfile>
> > > > > > > > > >         . . .
> > > > > > > > > > </extensions>
> > > > > > > > > >
> > > > > > > > > > If the packages are installed properly, you should see
> > > lines
> > > > > > like
> > > > > > > > the
> > > > > > > > > > following in this log file:
> > > > > > > > > >
> > > > > > > > > > Wed Sep 28 13:52:53 2005 JM_SCRIPT: Adding
> > > > > > "should_transfer_files
> > > > > > > =
> > > > > > > > > > ALWAYS"
> > > > > > > > > >
> > > > > > > > > > Wed Sep 28 13:52:53 2005 JM_SCRIPT: Adding
> > > > > "WhenToTransferOutput
> > > > > > =
> > > > > > > > > > ON_EXIT"
> > > > > > > > > >
> > > > > > > > > > Also, I don't see you specifying any
> transfer_input_file
> > > or
> > > > > > > > > > transfer_output_file extension elements.  You need
> those
> > > to
> > > > > > > specify
> > > > > > > > > > which files to transfer to or from the compute node.
> GRAM
> > > > > will
> > > > > > > not
> > > > > > > > > set
> > > > > > > > > > those up for you automatically.
> > > > > > > > > >
> > > > > > > > > > Peter
> > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > ii) I submitted the problem; from here we are
> working to
> > > > > solve
> > > > > > > > this
> > > > > > > > > > > problem.
> > > > > > > > > > >
> > > > > > > > > > > iii) Now I commented out the above two lines which I
> > > added
> > > > > in
> > > > > > > > > > condor.pm.
> > > > > > > > > > > I submitted the XML Job description has the
> extensions
> > > tag
> > > > > > with
> > > > > > > > the
> > > > > > > > > > > options condor:should_transfer_files = YES and
> > > > > > > > > > > condor:WhenToTransferOutput = ON_EXIT. Now I back to
> > > stage
> > > > > > one,
> > > > > > > > that
> > > > > > > > > > is
> > > > > > > > > > > the jobs are not running and idle bcos of the
> > > requirement
> > > > > > > problem,
> > > > > > > > > it
> > > > > > > > > > > doesn't have the file transfer option even though we
> > > > > specified
> > > > > > > in
> > > > > > > > > the
> > > > > > > > > > > job description.
> > > > > > > > > > >
> > > > > > > > > > > In conclusion, some thing is overriding the
> extensions
> > > tag
> > > > > or
> > > > > > > the
> > > > > > > > > > > scripts like condor.pm are not understanding the
> > > extensions
> > > > > > > part.
> > > > > > > > > > > So after updating all these 4 packages, we are
> having
> > > the
> > > > > same
> > > > > > > > > > problem.
> > > > > > > > > > >
> > > > > > > > > > > Please help me on this, I am at University Of
> > > Pittsburgh,
> > > > > you
> > > > > > > can
> > > > > > > > > > reach
> > > > > > > > > > > me at 412-624-6578.
> > > > > > > > > > >
> > > > > > > > > > > Thanks,
> > > > > > > > > > > Senthil
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > > > > Sent: Wednesday, September 28, 2005 2:48 PM
> > > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > Subject: RE: [Globus-discuss] Problem in Job
> Submission
> > > to
> > > > > > > Condor
> > > > > > > > > > > through GT4
> > > > > > > > > > >
> > > > > > > > > > > On Wed, 2005-09-28 at 14:04 -0400, Natarajan,
> Senthil
> > > wrote:
> > > > > > > > > > > > Peter,
> > > > > > > > > > > > Thanks lot and I appreciate your help.
> > > > > > > > > > > > I successfully installed those packages. I am
> trying
> > > to
> > > > > > > execute
> > > > > > > > > the
> > > > > > > > > > > XML
> > > > > > > > > > >
> > > > > > > > > > > Excellent!
> > > > > > > > > > >
> > > > > > > > > > > > Job description with the new extension tags(
> > > > > > > > > > > > condor:should_transfer_files ,
> > > condor:transfer_output_file
> > > > > > > etc)
> > > > > > > > > Now
> > > > > > > > > > > the
> > > > > > > > > > > > globus parser is not recognizing these new tags
> its
> > > giving
> > > > > > > > parser
> > > > > > > > > > > error.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Looks like we need to include the Namespace of
> where
> > > these
> > > > > > new
> > > > > > > > > tags
> > > > > > > > > > > are
> > > > > > > > > > > > located. Did you include any additional namespace
> > > while
> > > > > > > testing?
> > > > > > > > > > >
> > > > > > > > > > > Interesting.  My parser seems to be more lenient.
> This
> > > > > should
> > > > > > > be
> > > > > > > > a
> > > > > > > > > > > simple matter to fix, though (famous last words, I
> > > know).
> > > > > If
> > > > > > > you
> > > > > > > > > edit
> > > > > > > > > > > the
> > > > > $GLOBUS_LOCATION/lib/perl/Globus/GRAM/ExtensionsHandler.pm
> > > > > > > > file
> > > > > > > > > > and
> > > > > > > > > > > search "new XML::Parser", you should be able to add
> a
> > > hash
> > > > > > > > parameter
> > > > > > > > > > to
> > > > > > > > > > > turn off namespace processing.  Change the
> following:
> > > > > > > > > > >
> > > > > > > > > > > my $extParser = new XML::Parser(Handlers => {
> > > > > > > > > > >             Start       => sub {
> $self->StartTag(@_); },
> > > > > > > > > > >             End         => sub { $self->EndTag(@_);
> },
> > > > > > > > > > >             Char        => sub { $self->Char(@_); }
> });
> > > > > > > > > > >
> > > > > > > > > > > to this:
> > > > > > > > > > >
> > > > > > > > > > > my $extParser = new XML::Parser(
> > > > > > > > > > >       Namespaces => 0,
> > > > > > > > > > >       Handlers => {
> > > > > > > > > > >             Start       => sub {
> $self->StartTag(@_); },
> > > > > > > > > > >             End         => sub { $self->EndTag(@_);
> },
> > > > > > > > > > >             Char        => sub { $self->Char(@_); }
> });
> > > > > > > > > > >
> > > > > > > > > > > Either that or just put a bogus xmlns attribute in
> the
> > > > > > > extensions
> > > > > > > > > > start
> > > > > > > > > > > tag:
> > > > > > > > > > >
> > > > > > > > > > > <extensions xmlns:condor="bogus_condor_namespace">
> > > > > > > > > > >       <condor:should_transfer_files>...
> > > > > > > > > > >       . . .
> > > > > > > > > > > </extensions>
> > > > > > > > > > >
> > > > > > > > > > > Let me know how it goes.
> > > > > > > > > > >
> > > > > > > > > > > Peter
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Here I am pasting the error and the XML Job
> > > description.
> > > > > > > > > > > >
> > > > > > > > > > > > [senthil@gis14 GridTest]$ globusrun-ws -submit -F
> > > hostname
> > > > > > -f
> > > > > > > > > > > > multi_condor_test1.xml
> > > > > > > > > > > > globusrun-ws: Error loading rsl
> > > > > > > > > > > > globus_soap_message_module: Deserialization of
> > > > > > > > > > > > {http://www.w3.org/2001/XMLSchema}string failed.
> > > > > > > > > > > > globus_soap_message_module: XML parser failed to
> get
> > > the
> > > > > > next
> > > > > > > > node
> > > > > > > > > > in
> > > > > > > > > > > > the message
> > > > > > > > > > > > globus_soap_message_module: Parser Failed
> Namespace
> > > prefix
> > > > > > > > condor
> > > > > > > > > on
> > > > > > > > > > > > should_transfer_files is not defined
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > <?xml version="1.0" encoding="UTF-8"?>
> > > > > > > > > > > > <multiJob
> > > > > > > > > > >
> > > > > xmlns:gram="http://www.globus.org/namespaces/2004/10/gram/job";
> > > > > > > > > > > >
> > > > > > > >
> xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/03/addressing";>
> > > > > > > > > > > >     <factoryEndpoint>
> > > > > > > > > > > >         <wsa:Address>
> > > > > > > > > > > >
> > > > > > > > > > >
> > > https://hostname:8443/wsrf/services/ManagedJobFactoryService
> > > > > > > > > > > >         </wsa:Address>
> > > > > > > > > > > >         <wsa:ReferenceProperties>
> > > > > > > > > > > >
> <gram:ResourceID>Multi</gram:ResourceID>
> > > > > > > > > > > >         </wsa:ReferenceProperties>
> > > > > > > > > > > >     </factoryEndpoint>
> > > > > > > > > > > >     <directory>${GLOBUS_LOCATION}</directory>
> > > > > > > > > > > >     <count>1</count>
> > > > > > > > > > > >
> > > > > > > > > > > >     <job>
> > > > > > > > > > > >         <factoryEndpoint>
> > > > > > > > > > > >             <wsa:Address>
> > > > > > > > > > > > 
> > > > > > > > > > > >
> > > > > https://hostname:8443/wsrf/services/ManagedJobFactoryService
> > > > > > > > > > > >             </wsa:Address>
> > > > > > > > > > > >             <wsa:ReferenceProperties>
> > > > > > > > > > > >
> > > <gram:ResourceID>Condor</gram:ResourceID>
> > > > > > > > > > > >             </wsa:ReferenceProperties>
> > > > > > > > > > > >         </factoryEndpoint>
> > > > > > > > > > > >
> > > > > > > <executable>/home/senthil/GridTest/sh_loop</executable>
> > > > > > > > > > > >         <argument>60</argument>
> > > > > > > > > > > >
> <stdout>${GLOBUS_USER_HOME}/stdout.j3</stdout>
> > > > > > > > > > > >
> <stderr>${GLOBUS_USER_HOME}/stderr.j3</stderr>
> > > > > > > > > > > >         <count>1</count>
> > > > > > > > > > > >         <extensions>
> > > > > > > > > > > > 
> > > > > > > > > > > >
> > > > > > > > > >
> > > > > > > >
> > > > > >
> > >
> <condor:should_transfer_files>IF_NEEDED</condor:should_transfer_files>
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > >
> <condor:WhenToTransferFiles>ON_EXIT</condor:WhenToTransferFiles>
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> <condor:transfer_output_file>${GLOBUS_USER_HOME}/stdout.j3</condor:trans
> > > > > > > > > > > > fer_output_file>
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> <condor:transfer_output_file>${GLOBUS_USER_HOME}/stderr.j3</condor:trans
> > > > > > > > > > > > fer_output_file>
> > > > > > > > > > > >     </extensions>
> > > > > > > > > > > >   </job>
> > > > > > > > > > > >
> > > > > > > > > > > > <job>
> > > > > > > > > > > >         <factoryEndpoint>
> > > > > > > > > > > >             <wsa:Address>
> > > > > > > > > > > > 
> > > > > > > > > > > >
> > > > > https://hostname:8443/wsrf/services/ManagedJobFactoryService
> > > > > > > > > > > >             </wsa:Address>
> > > > > > > > > > > >             <wsa:ReferenceProperties>
> > > > > > > > > > > >
> > > <gram:ResourceID>Condor</gram:ResourceID>
> > > > > > > > > > > >             </wsa:ReferenceProperties>
> > > > > > > > > > > >         </factoryEndpoint>
> > > > > > > > > > > >
> > > > > > > <executable>/home/senthil/GridTest/sh_loop</executable>
> > > > > > > > > > > >         <argument>120</argument>
> > > > > > > > > > > >
> <stdout>${GLOBUS_USER_HOME}/stdout.j4</stdout>
> > > > > > > > > > > >
> <stderr>${GLOBUS_USER_HOME}/stderr.j4</stderr>
> > > > > > > > > > > >         <count>1</count>
> > > > > > > > > > > >     </job>
> > > > > > > > > > > >
> > > > > > > > > > > > </multiJob>
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > > > > > Sent: Wednesday, September 28, 2005 12:05 PM
> > > > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > > Subject: RE: [Globus-discuss] Problem in Job
> > > Submission to
> > > > > > > > Condor
> > > > > > > > > > > > through GT4
> > > > > > > > > > > >
> > > > > > > > > > > > On Wed, 2005-09-28 at 11:36 -0400, Natarajan,
> Senthil
> > > > > wrote:
> > > > > > > > > > > > > Peter,
> > > > > > > > > > > > > I tried with different combinations the package
> > > > > > > > > > > > > globus_wsrf_gram_service_java-0.78.0 went
> through.
> > > > > > > > > > > > >
> > > > > > > > > > > > > But still other packages are giving problem; the
> > > problem
> > > > > > is
> > > > > > > it
> > > > > > > > > > > > couldn't
> > > > > > > > > > > > > find the file Doxyfile.in under the directory
> > > doxygen.
> > > > > > > > > (Physically
> > > > > > > > > > I
> > > > > > > > > > > > > couldn't find the file in that directory). Could
> you
> > > > > > please
> > > > > > > > help
> > > > > > > > > > me
> > > > > > > > > > > on
> > > > > > > > > > > > > this, I am kind of stuck.
> > > > > > > > > > > >
> > > > > > > > > > > > Yeah, this is my fault.  I wasn't creating source
> > > packages
> > > > > > > > > > correctly.
> > > > > > > > > > > I
> > > > > > > > > > > > talked to the GPT gurus and created a new set of
> > > source
> > > > > > > packages
> > > > > > > > > > that
> > > > > > > > > > > > should work.  I refreshed the downloads page so
> you
> > > should
> > > > > > see
> > > > > > > > the
> > > > > > > > > > > > section in question dated September 28.  Try those
> > > > > packages.
> > > > > > > > > Again,
> > > > > > > > > > > > sorry for the inconvenience.  It's a learning
> process
> > > for
> > > > > me
> > > > > > > > too.
> > > > > > > > > :)
> > > > > > > > > > > >
> > > > > > > > > > > > Peter
> > > > > > > > > > > >
> > > > > > > > > > > > > Thanks,
> > > > > > > > > > > > > Senthil
> > > > > > > > > > > > >
> > > > > > > > > > > > > Here is the error msg.
> > > > > > > > > > > > >
> > > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > > >
> globus_scheduler_event_generator-1.0.1-src.tar.gz
> > > > > gcc32dbg
> > > > > > > > > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES FOR
> > > > > > > > > > > > > globus_scheduler_event_generator
> > > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_scheduler_event_gener
> > > > > > > > > > > > > ator-1.0.1/
> > > > > > > > > > > > > gpt-build ====> BUILDING FLAVOR gcc32dbg
> > > > > > > > > > > > >
> > > GLOBUS_LOCATION=/usr/local/GridComputing/globus-4.0.1;
> > > > > > > export
> > > > > > > > > > > > > GLOBUS_LOCATION;  CPP='/usr/bin/gcc -E'; export
> CPP;
> > > > > > > > CPPFLAGS='
> > > > > > > > > > > > > -I/usr/local/GridComputing/globus-4.0.1/include
> > > > > > > > > > > > >
> > > > > -I/usr/local/GridComputing/globus-4.0.1/include/gcc32dbg';
> > > > > > > > > export
> > > > > > > > > > > > > CPPFLAGS; CFLAGS='-g   -Wall'; export CFLAGS;
> > > LDFLAGS='
> > > > > > > > > > > > > -L/usr/local/GridComputing/globus-4.0.1/lib';
> export
> > > > > > > LDFLAGS;
> > > > > > > > > > > > > CXX='/usr/bin/g++'; export CXX;
> CXXCPP='/usr/bin/g++
> > > > > -E';
> > > > > > > > export
> > > > > > > > > > > > CXXCPP;
> > > > > > > > > > > > > CXXFLAGS='-g  '; export CXXFLAGS;
> > > F77='/usr/bin/g77';
> > > > > > export
> > > > > > > > > F77;
> > > > > > > > > > > > > AR='/usr/bin/ar'; export AR; ARFLAGS='ruv';
> export
> > > > > > ARFLAGS;
> > > > > > > > > > > > > RANLIB='/usr/bin/ranlib'; export RANLIB;
> > > NM='/usr/bin/nm
> > > > > > > -B';
> > > > > > > > > > export
> > > > > > > > > > > > NM;
> > > > > > > > > > > > > CC='/usr/bin/gcc'; export CC;
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_scheduler_event_gener
> > > > > > > > > > > > > ator-1.0.1//configure  --with-flavor=gcc32dbg
> > > > > > > > > > > > > checking whether to enable maintainer-specific
> > > portions
> > > > > of
> > > > > > > > > > > > Makefiles...
> > > > > > > > > > > > > no
> > > > > > > > > > > > > Dependencies Complete
> > > > > > > > > > > > > checking for a BSD-compatible install...
> > > > > /usr/bin/install
> > > > > > -c
> > > > > > > > > > > > > checking whether build environment is sane...
> yes
> > > > > > > > > > > > > checking for gawk... gawk
> > > > > > > > > > > > > checking whether make sets $(MAKE)... yes
> > > > > > > > > > > > > configure: creating ./config.status
> > > > > > > > > > > > > config.status: creating Makefile
> > > > > > > > > > > > > config.status: creating pkgdata/Makefile
> > > > > > > > > > > > > config.status: creating pkgdata/pkg_data_src.gpt
> > > > > > > > > > > > > config.status: creating doxygen/Makefile
> > > > > > > > > > > > > config.status: creating doxygen/Doxyfile
> > > > > > > > > > > > > config.status: error: cannot find input file:
> > > > > > > > > doxygen/Doxyfile.in
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > > > globus_gram_job_manager-7.6.2-src.tar.gz
> gcc32dbg
> > > > > > > > > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES FOR
> > > > > > > > > > > > globus_gram_job_manager
> > > > > > > > > > > > > ERROR: The following packages are missing
> > > > > > > > > > > > > Package globus_gram_job_manager-ANY-src is
> missing
> > > > > > > > > > > > >
> pgm_link-globus_scheduler_event_generator-ANY-dev
> > > > > > > > > > > > > Package globus_gram_job_manager-ANY-src is
> missing
> > > > > > > > > > > > > compile-globus_scheduler_event_generator-ANY-dev
> > > > > > > > > > > > >
> > > > > > > > > > > > > Died at
> > > > > > /usr/local/GridComputing/software/GPT/sbin/gpt-build
> > > > > > > > > line
> > > > > > > > > > > 362,
> > > > > > > > > > > > > <FILE> line 104566.
> > > > > > > > > > > > >
> > > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > > >
> > > globus_gram_job_manager_setup_condor-2.8.1-src.tar.gz
> > > > > > > gcc32dbg
> > > > > > > > > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES FOR
> > > > > > > > > > > > > globus_gram_job_manager_setup_condor
> > > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > > > > > > > > p_condor-2.8.1/
> > > > > > > > > > > > > gpt-build ====> BUILDING
> > > > > > > globus_gram_job_manager_setup_condor
> > > > > > > > > > > > >
> > > GLOBUS_LOCATION=/usr/local/GridComputing/globus-4.0.1;
> > > > > > > export
> > > > > > > > > > > > > GLOBUS_LOCATION;
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > > > > > > > > p_condor-2.8.1//configure  --with-flavor=
> > > > > > > > > > > > > checking whether to enable maintainer-specific
> > > portions
> > > > > of
> > > > > > > > > > > > Makefiles...
> > > > > > > > > > > > > no
> > > > > > > > > > > > > Warning: package doesn't build with flavors
> ignored
> > > > > > > > > > > > > Warning:  ignored
> > > > > > > > > > > > > Dependencies Complete
> > > > > > > > > > > > > checking for a BSD-compatible install...
> > > > > /usr/bin/install
> > > > > > -c
> > > > > > > > > > > > > checking whether build environment is sane...
> yes
> > > > > > > > > > > > > checking for gawk... gawk
> > > > > > > > > > > > > checking whether make sets $(MAKE)... yes
> > > > > > > > > > > > > configure: creating ./config.status
> > > > > > > > > > > > > config.status: creating Makefile
> > > > > > > > > > > > > config.status: creating pkgdata/Makefile
> > > > > > > > > > > > > config.status: creating pkgdata/pkg_data_src.gpt
> > > > > > > > > > > > > config.status: creating doxygen/Doxyfile
> > > > > > > > > > > > > config.status: error: cannot find input file:
> > > > > > > > > doxygen/Doxyfile.in
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > 
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > > > > > > Sent: Tuesday, September 27, 2005 6:38 PM
> > > > > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > > > Subject: RE: [Globus-discuss] Problem in Job
> > > Submission
> > > > > to
> > > > > > > > > Condor
> > > > > > > > > > > > > through GT4
> > > > > > > > > > > > >
> > > > > > > > > > > > > I believe I fixed the
> > > > > globus_wsrf_gram_service_java-0.78.0
> > > > > > > > > package
> > > > > > > > > > > > > (replaced the package).  I'm still trying to
> work
> > > with
> > > > > the
> > > > > > > GPT
> > > > > > > > > > > experts
> > > > > > > > > > > > > to figure out why the scheduler_event_generator
> > > package
> > > > > > > isn't
> > > > > > > > > > > > > relocatable.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Peter
> > > > > > > > > > > > >
> > > > > > > > > > > > > On Tue, 2005-09-27 at 16:01 -0400, Natarajan,
> > > Senthil
> > > > > > wrote:
> > > > > > > > > > > > > > Peter,
> > > > > > > > > > > > > > I am trying to install the packages in the
> > > following
> > > > > > order
> > > > > > > > > > > > > > globus_wsrf_gram_service_java-0.78.0
> > > > > > > > > > > > > > globus_scheduler_event_generator-1.0.1
> > > > > > > > > > > > > > before going for the main packages. But I am
> > > getting
> > > > > the
> > > > > > > > > > following
> > > > > > > > > > > > > > error.
> > > > > > > > > > > > > > Please let me know am I trying correctly.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > > > >
> globus_wsrf_gram_service_java-0.78.0-src.tar.gz
> > > > > gcc32dbg
> > > > > > > > > > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES
> FOR
> > > > > > > > > > > > > > globus_wsrf_gram_service_java
> > > > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > > a-0.78.0/
> > > > > > > > > > > > > > gpt-build ====> BUILDING
> > > globus_wsrf_gram_service_java
> > > > > > > > > > > > > >  ant
> > > > > > > > >
> -Denv.GLOBUS_LOCATION=/usr/local/GridComputing/globus-4.0.1
> > > > > > > > > > > > > > Buildfile: build.xml
> > > > > > > > > > > > > >   [taskdef] Could not load definitions from
> > > resource
> > > > > > > > > > clovertasks.
> > > > > > > > > > > It
> > > > > > > > > > > > > > could not be found.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > initClover:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > init:
> > > > > > > > > > > > > >     [mkdir] Created dir:
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > > a-0.78.0/build
> > > > > > > > > > > > > >     [mkdir] Created dir:
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > > a-0.78.0/build/classes
> > > > > > > > > > > > > >     [mkdir] Created dir:
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > > a-0.78.0/build/lib
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > compile:
> > > > > > > > > > > > > >     [javac] Compiling 36 source files to
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > > a-0.78.0/build/classes
> > > > > > > > > > > > > >     [javac]
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> a-0.78.0/src/org/globus/exec/service/job/ManagedJobResourceImpl.java:259
> > > > > > > > > > > > > > : warning: non-varargs call of varargs method
> with
> > > > > > inexact
> > > > > > > > > > > argument
> > > > > > > > > > > > > type
> > > > > > > > > > > > > > for last parameter;
> > > > > > > > > > > > > >     [javac] cast to java.lang.Object for a
> varargs
> > > > > call
> > > > > > > > > > > > > >     [javac] cast to java.lang.Object[] for a
> > > > > non-varargs
> > > > > > > > call
> > > > > > > > > > and
> > > > > > > > > > > to
> > > > > > > > > > > > > > suppress this warning
> > > > > > > > > > > > > >     [javac]                 value =
> > > > > > > > > > > readMethod.invoke(resourceData,
> > > > > > > > > > > > > > null);
> > > > > > > > > > > > > >     [javac]
> > > > > > > > > > > > ^
> > > > > > > > > > > > > >     [javac]
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> a-0.78.0/src/org/globus/exec/service/multi/ManagedMultiJobResource.java:
> > > > > > > > > > > > > > 385: warning: non-varargs call of varargs
> method
> > > with
> > > > > > > > inexact
> > > > > > > > > > > > argument
> > > > > > > > > > > > > > type for last parameter;
> > > > > > > > > > > > > >     [javac] cast to java.lang.Object for a
> varargs
> > > > > call
> > > > > > > > > > > > > >     [javac] cast to java.lang.Object[] for a
> > > > > non-varargs
> > > > > > > > call
> > > > > > > > > > and
> > > > > > > > > > > to
> > > > > > > > > > > > > > suppress this warning
> > > > > > > > > > > > > >     [javac]
> > > > > > > > subJobDescriptions[index],
> > > > > > > > > > > > null);
> > > > > > > > > > > > > >     [javac]
> > > > > > > > > ^
> > > > > > > > > > > > > >     [javac]
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> a-0.78.0/src/org/globus/exec/service/multi/ManagedMultiJobResource.java:
> > > > > > > > > > > > > > 697: cannot find symbol
> > > > > > > > > > > > > >     [javac] symbol  : variable
> > > > > SUBJOB_UNSUBSCRIBE_ERROR
> > > > > > > > > > > > > >     [javac] location: class
> > > > > > > org.globus.exec.utils.Resources
> > > > > > > > > > > > > >     [javac]
> > > > > > > > > > > > > Resources.SUBJOB_UNSUBSCRIBE_ERROR);
> > > > > > > > > > > > > >     [javac]                                  ^
> > > > > > > > > > > > > >     [javac]
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> a-0.78.0/src/org/globus/exec/service/multi/ManagedMultiJobResource.java:
> > > > > > > > > > > > > > 857: cannot find symbol
> > > > > > > > > > > > > >     [javac] symbol  : variable
> > > > > > SUBJOB_STUB_SECURITY_ERROR
> > > > > > > > > > > > > >     [javac] location: class
> > > > > > > org.globus.exec.utils.Resources
> > > > > > > > > > > > > >     [javac]
> > > > > > > > > > > > > > Resources.SUBJOB_STUB_SECURITY_ERROR);
> > > > > > > > > > > > > >     [javac]
> > > ^
> > > > > > > > > > > > > >     [javac] Note: Some input files use
> unchecked
> > > or
> > > > > > unsafe
> > > > > > > > > > > > operations.
> > > > > > > > > > > > > >     [javac] Note: Recompile with
> -Xlint:unchecked
> > > for
> > > > > > > > details.
> > > > > > > > > > > > > >     [javac] 2 errors
> > > > > > > > > > > > > >     [javac] 2 warnings
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > BUILD FAILED
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_wsrf_gram_service_jav
> > > > > > > > > > > > > > a-0.78.0/build.xml:39: Compile failed; see the
> > > > > compiler
> > > > > > > > error
> > > > > > > > > > > output
> > > > > > > > > > > > > for
> > > > > > > > > > > > > > details.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Total time: 15 seconds
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > ERROR: Build has failed
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > > > >
> globus_scheduler_event_generator-1.0.1-src.tar.gz
> > > > > > gcc32dbg
> > > > > > > > > > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES
> FOR
> > > > > > > > > > > > > > globus_scheduler_event_generator
> > > > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_scheduler_event_gener
> > > > > > > > > > > > > > ator-1.0.1/
> > > > > > > > > > > > > > gpt-build ====> BUILDING FLAVOR gcc32dbg
> > > > > > > > > > > > > >
> > > GLOBUS_LOCATION=/usr/local/GridComputing/globus-4.0.1;
> > > > > > > > export
> > > > > > > > > > > > > > GLOBUS_LOCATION;  CPP='/usr/bin/gcc -E';
> export
> > > CPP;
> > > > > > > > > CPPFLAGS='
> > > > > > > > > > > > > >
> -I/usr/local/GridComputing/globus-4.0.1/include
> > > > > > > > > > > > > >
> > > > > > -I/usr/local/GridComputing/globus-4.0.1/include/gcc32dbg';
> > > > > > > > > > export
> > > > > > > > > > > > > > CPPFLAGS; CFLAGS='-g   -Wall'; export CFLAGS;
> > > > > LDFLAGS='
> > > > > > > > > > > > > > -L/usr/local/GridComputing/globus-4.0.1/lib';
> > > export
> > > > > > > > LDFLAGS;
> > > > > > > > > > > > > > CXX='/usr/bin/g++'; export CXX;
> > > CXXCPP='/usr/bin/g++
> > > > > > -E';
> > > > > > > > > export
> > > > > > > > > > > > > CXXCPP;
> > > > > > > > > > > > > > CXXFLAGS='-g  '; export CXXFLAGS;
> > > F77='/usr/bin/g77';
> > > > > > > export
> > > > > > > > > > F77;
> > > > > > > > > > > > > > AR='/usr/bin/ar'; export AR; ARFLAGS='ruv';
> export
> > > > > > > ARFLAGS;
> > > > > > > > > > > > > > RANLIB='/usr/bin/ranlib'; export RANLIB;
> > > > > NM='/usr/bin/nm
> > > > > > > > -B';
> > > > > > > > > > > export
> > > > > > > > > > > > > NM;
> > > > > > > > > > > > > > CC='/usr/bin/gcc'; export CC;
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_scheduler_event_gener
> > > > > > > > > > > > > > ator-1.0.1//configure  --with-flavor=gcc32dbg
> > > > > > > > > > > > > > checking whether to enable maintainer-specific
> > > > > portions
> > > > > > of
> > > > > > > > > > > > > Makefiles...
> > > > > > > > > > > > > > no
> > > > > > > > > > > > > > Dependencies Complete
> > > > > > > > > > > > > > checking for a BSD-compatible install...
> > > > > > /usr/bin/install
> > > > > > > -c
> > > > > > > > > > > > > > checking whether build environment is sane...
> yes
> > > > > > > > > > > > > > checking for gawk... gawk
> > > > > > > > > > > > > > checking whether make sets $(MAKE)... yes
> > > > > > > > > > > > > > configure: creating ./config.status
> > > > > > > > > > > > > > config.status: creating Makefile
> > > > > > > > > > > > > > config.status: creating pkgdata/Makefile
> > > > > > > > > > > > > > config.status: creating
> pkgdata/pkg_data_src.gpt
> > > > > > > > > > > > > > config.status: creating doxygen/Makefile
> > > > > > > > > > > > > > config.status: creating doxygen/Doxyfile
> > > > > > > > > > > > > > config.status: error: cannot find input file:
> > > > > > > > > > doxygen/Doxyfile.in
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > ERROR: Build has failed
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > > > > > > > Sent: Tuesday, September 27, 2005 3:23 PM
> > > > > > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > > > > Subject: RE: [Globus-discuss] Problem in Job
> > > > > Submission
> > > > > > to
> > > > > > > > > > Condor
> > > > > > > > > > > > > > through GT4
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Hmm, I just downloaded the condor setup
> package I
> > > have
> > > > > > up
> > > > > > > > > there
> > > > > > > > > > > now
> > > > > > > > > > > > to
> > > > > > > > > > > > > > check it myself and installed it without a
> > > problem.
> > > > > Try
> > > > > > > > > > > downloading
> > > > > > > > > > > > > > fresh copies of all the packages you need.
> Just
> > > for
> > > > > > > sanity,
> > > > > > > > > > > here's
> > > > > > > > > > > > > the
> > > > > > > > > > > > > > MD5 checksum:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > a37800228817290ccea05399ac986062
> > > > > > > > > > > > > >
> > > globus_gram_job_manager_setup_condor-2.8.1-src.tar.gz
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Peter
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > On Tue, 2005-09-27 at 13:50 -0400, Natarajan,
> > > Senthil
> > > > > > > wrote:
> > > > > > > > > > > > > > > Peter,
> > > > > > > > > > > > > > > I downloaded your new package (after
> bootstrap)
> > > then
> > > > > I
> > > > > > > try
> > > > > > > > > to
> > > > > > > > > > > > > install
> > > > > > > > > > > > > > it
> > > > > > > > > > > > > > > gave me the following error.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > > > > >
> > > > > globus_gram_job_manager_setup_condor-2.8.1-src.tar.gz
> > > > > > > > > gcc32dbg
> > > > > > > > > > > > > > > gpt-build ====> CHECKING BUILD DEPENDENCIES
> FOR
> > > > > > > > > > > > > > > globus_gram_job_manager_setup_condor
> > > > > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > > > > > > > > > > p_condor-2.8.1/
> > > > > > > > > > > > > > > gpt-build ====> BUILDING
> > > > > > > > > globus_gram_job_manager_setup_condor
> > > > > > > > > > > > > > >
> > > > > GLOBUS_LOCATION=/usr/local/GridComputing/globus-4.0.1;
> > > > > > > > > export
> > > > > > > > > > > > > > > GLOBUS_LOCATION;
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > > > > > > > > > > p_condor-2.8.1//configure  --with-flavor=
> > > > > > > > > > > > > > > checking whether to enable
> maintainer-specific
> > > > > > portions
> > > > > > > of
> > > > > > > > > > > > > > Makefiles...
> > > > > > > > > > > > > > > no
> > > > > > > > > > > > > > > Warning: package doesn't build with flavors
> > > ignored
> > > > > > > > > > > > > > > Warning:  ignored
> > > > > > > > > > > > > > > Dependencies Complete
> > > > > > > > > > > > > > > checking for a BSD-compatible install...
> > > > > > > /usr/bin/install
> > > > > > > > -c
> > > > > > > > > > > > > > > checking whether build environment is
> sane...
> > > yes
> > > > > > > > > > > > > > > checking for gawk... gawk
> > > > > > > > > > > > > > > checking whether make sets $(MAKE)... yes
> > > > > > > > > > > > > > > configure: creating ./config.status
> > > > > > > > > > > > > > > config.status: creating Makefile
> > > > > > > > > > > > > > > config.status: creating pkgdata/Makefile
> > > > > > > > > > > > > > > config.status: creating
> pkgdata/pkg_data_src.gpt
> > > > > > > > > > > > > > > config.status: creating doxygen/Doxyfile
> > > > > > > > > > > > > > > config.status: error: cannot find input
> file:
> > > > > > > > > > > doxygen/Doxyfile.in
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > I thought of doing ./bootstrap in the source
> > > > > > directory,
> > > > > > > it
> > > > > > > > > > gave
> > > > > > > > > > > > the
> > > > > > > > > > > > > > > following error.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > [globus@gis14
> > > > > > > globus_gram_job_manager_setup_condor-2.8.1]$
> > > > > > > > > > > > > ./bootstrap
> > > > > > > > > > > > > > > installing globus_automake_pre link
> > > > > > > > > > > > > > > installing globus_automake_post link
> > > > > > > > > > > > > > > installing globus_automake_pre_top link
> > > > > > > > > > > > > > > installing globus_automake_post_top link
> > > > > > > > > > > > > > > running aclocal  -I
> > > > > > > > > > > > > > >
> > > > > > > /usr/local/GridComputing/globus-4.0.1/share/globus_aclocal
> > > > > > > > > -I
> > > > > > > > > > > > > > >
> > > > > > /usr/local/GridComputing/software/GPT/share/gpt/aclocal
> > > > > > > > > > > > > > > running libtoolize --copy --force
> > > > > > > > > > > > > > > running automake --copy -add-missing
> --foreign
> > > > > > > > > > > > > > > configure.in: installing `./mkinstalldirs'
> > > > > > > > > > > > > > > running gpt_create_automake_rules
> > > --excludes=doxygen
> > > > > > > > > > > > > > > running autoconf
> > > > > > > > > > > > > > > Can't locate object method "path" via
> package
> > > > > > > > > > > "Autom4te::Request"
> > > > > > > > > > > > at
> > > > > > > > > > > > > > > /usr/bin/autom4te line 81.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > ERROR: bootstrap failed!
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > > > From: Peter G Lane [mailto:lane@xxxxxxxxxxx]
> > > > > > > > > > > > > > > Sent: Tuesday, September 27, 2005 1:18 PM
> > > > > > > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > > > > > Subject: RE: [Globus-discuss] Problem in Job
> > > > > > Submission
> > > > > > > to
> > > > > > > > > > > Condor
> > > > > > > > > > > > > > > through GT4
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > This one's my fault.  I forgot to bootstrap
> the
> > > > > source
> > > > > > > > > package
> > > > > > > > > > > > > before
> > > > > > > > > > > > > > I
> > > > > > > > > > > > > > > put it up on the web site.  Either download
> the
> > > > > > package
> > > > > > > > > again
> > > > > > > > > > (I
> > > > > > > > > > > > > > > replaced the package file) or untar the
> package
> > > and
> > > > > > > > execute
> > > > > > > > > > > > > > ./bootstrap
> > > > > > > > > > > > > > > in the source package directory.  You can
> then
> > > type
> > > > > > > > > gpt-build
> > > > > > > > > > > > > <flavor>
> > > > > > > > > > > > > > > in the package directory.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > I'm looking into the other package version
> > > problem.
> > > > > > The
> > > > > > > > > major
> > > > > > > > > > > > > version
> > > > > > > > > > > > > > > number for the scheduler_event_generator
> package
> > > in
> > > > > > the
> > > > > > > > > trunk
> > > > > > > > > > > got
> > > > > > > > > > > > > > bumped
> > > > > > > > > > > > > > > and I'm not sure why.  It might be as simple
> as
> > > > > > lowering
> > > > > > > > the
> > > > > > > > > > > major
> > > > > > > > > > > > > > > version requirement in the job_manager
> package
> > > > > > > dependency,
> > > > > > > > > but
> > > > > > > > > > I
> > > > > > > > > > > > > want
> > > > > > > > > > > > > > to
> > > > > > > > > > > > > > > make sure.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Peter
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > On Tue, 2005-09-27 at 11:08 -0400,
> Natarajan,
> > > > > Senthil
> > > > > > > > wrote:
> > > > > > > > > > > > > > > > Peter,
> > > > > > > > > > > > > > > > I tried to install the package
> > > > > > > > > > > > > > > >
> globus_gram_job_manager_setup_condor-2.8.1, it
> > > > > also
> > > > > > > gave
> > > > > > > > > the
> > > > > > > > > > > > > > following
> > > > > > > > > > > > > > > > error.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > > > > > >
> > > > > > globus_gram_job_manager_setup_condor-2.8.1-src.tar.gz
> > > > > > > > > > gcc32dbg
> > > > > > > > > > > > > > > > gpt-build ====> CHECKING BUILD
> DEPENDENCIES
> > > FOR
> > > > > > > > > > > > > > > > globus_gram_job_manager_setup_condor
> > > > > > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > > > > > > > > > > > p_condor-2.8.1/
> > > > > > > > > > > > > > > > gpt-build ====> BUILDING
> > > > > > > > > > globus_gram_job_manager_setup_condor
> > > > > > > > > > > > > > > >
> > > > > > GLOBUS_LOCATION=/usr/local/GridComputing/globus-4.0.1;
> > > > > > > > > > export
> > > > > > > > > > > > > > > > GLOBUS_LOCATION;
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > > > > > > > > > > > p_condor-2.8.1//configure  --with-flavor=
> > > > > > > > > > > > > > > > sh: line 1:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> /usr/local/GridComputing/globus-4.0.1/BUILD/globus_gram_job_manager_setu
> > > > > > > > > > > > > > > > p_condor-2.8.1//configure: No such file or
> > > > > directory
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > ERROR: Build has failed
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Please let me know is either the package
> is
> > > > > missing
> > > > > > > > > > something
> > > > > > > > > > > or
> > > > > > > > > > > > I
> > > > > > > > > > > > > > am
> > > > > > > > > > > > > > > > not updating correctly.
> > > > > > > > > > > > > > > > Thanks,
> > > > > > > > > > > > > > > > Senthil
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > > > > From: Natarajan, Senthil
> > > > > > > > > > > > > > > > Sent: Tuesday, September 27, 2005 10:22 AM
> > > > > > > > > > > > > > > > To: 'Peter G Lane'
> > > > > > > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > > > > > > Subject: RE: [Globus-discuss] Problem in
> Job
> > > > > > > Submission
> > > > > > > > to
> > > > > > > > > > > > Condor
> > > > > > > > > > > > > > > > through GT4
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Peter,
> > > > > > > > > > > > > > > > As you mentioned, here I am trying to
> build
> > > the
> > > > > > > package
> > > > > > > > > from
> > > > > > > > > > > Sep
> > > > > > > > > > > > > > 23rd
> > > > > > > > > > > > > > > > (globus_gram_job_manager-7.6.2) first and
> then
> > > the
> > > > > > > > package
> > > > > > > > > > > > > > > > globus_gram_job_manager_setup_condor-2.8.1
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > But I am getting this error in the Sep
> 23rd
> > > > > package
> > > > > > > > > itself,
> > > > > > > > > > am
> > > > > > > > > > > I
> > > > > > > > > > > > > > > missing
> > > > > > > > > > > > > > > > something? I have this gpt
> > > (gpt-3.2autotools2004)
> > > > > > and
> > > > > > > > > > > > Globus4.0.1
> > > > > > > > > > > > > > > > version.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > [globus@gis14 globus-4.0.1]$ gpt-build
> > > > > > > > > > > > > > globus_gram_job_manager-7.6.2-
> > > > > > > > > > > > > > > > src.tar.gz gcc32dbg
> > > > > > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > > > > > >
> > > > > > > > > >
> > > /usr/local/GridComputing/globus-4.0.1/BUILD/globus_core-4.26/
> > > > > > > > > > > > > > > > gpt-build ====> BUILDING FLAVOR gcc32dbg
> > > > > > > > > > > > > > > > gpt-build ====> Changing to
> > > > > > > > > > > > > > > /usr/local/GridComputing/globus-4.0.1/BUILD
> > > > > > > > > > > > > > > > gpt-build ====> REMOVING empty package
> > > > > > > > > > > > > > globus_core-gcc32dbg-pgm_static
> > > > > > > > > > > > > > > > gpt-build ====> REMOVING empty package
> > > > > > > > > > > globus_core-noflavor-doc
> > > > > > > > > > > > > > > > gpt-build ====> CHECKING BUILD
> DEPENDENCIES
> > > FOR
> > > > > > > > > > > > > > > globus_gram_job_manager
> > > > > > > > > > > > > > > > ERROR: The following packages are missing
> > > > > > > > > > > > > > > > Package
> > > > > > > > pgm_link-globus_scheduler_event_generator-ANY-dev
> > > > > > > > > > > > version
> > > > > > > > > > > > > > 0.3
> > > > > > > > > > > > > > > is
> > > > > > > > > > > > > > > > incompatible with
> > > globus_gram_job_manager-ANY-src
> > > > > > > > > > > > > > > > Package
> > > > > > > compile-globus_scheduler_event_generator-ANY-dev
> > > > > > > > > > > version
> > > > > > > > > > > > > 0.3
> > > > > > > > > > > > > > > is
> > > > > > > > > > > > > > > > incompatible with
> > > globus_gram_job_manager-ANY-src
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Died at
> > > > > > > > > /usr/local/GridComputing/software/GPT/sbin/gpt-build
> > > > > > > > > > > > line
> > > > > > > > > > > > > > 362,
> > > > > > > > > > > > > > > > <FILE> line 105362.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > > > > From: Peter G Lane
> [mailto:lane@xxxxxxxxxxx]
> > > > > > > > > > > > > > > > Sent: Monday, September 26, 2005 5:54 PM
> > > > > > > > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > > > > > > Subject: RE: [Globus-discuss] Problem in
> Job
> > > > > > > Submission
> > > > > > > > to
> > > > > > > > > > > > Condor
> > > > > > > > > > > > > > > > through GT4
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > On Mon, 2005-09-26 at 15:32 -0400,
> Natarajan,
> > > > > > Senthil
> > > > > > > > > wrote:
> > > > > > > > > > > > > > > > > Hi Peter,
> > > > > > > > > > > > > > > > > I am seeing the extensions for
> > > > > > > "transfer_input_file",
> > > > > > > > > > > > similarly
> > > > > > > > > > > > > > does
> > > > > > > > > > > > > > > > it
> > > > > > > > > > > > > > > > > has the "transfer_out_file" extension
> also
> > > in
> > > > > > order
> > > > > > > to
> > > > > > > > > > > > transfer
> > > > > > > > > > > > > > the
> > > > > > > > > > > > > > > > > output back.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > No, but I just put up a new update package
> > > > > > > > > > > > > > > >
> (globus_gram_job_manager_setup_condor-2.8.1)
> > > that
> > > > > > has
> > > > > > > > > > support
> > > > > > > > > > > > for
> > > > > > > > > > > > > > that
> > > > > > > > > > > > > > > > one.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > To install the update package, do I need
> to
> > > > > > compile
> > > > > > > > > using
> > > > > > > > > > > the
> > > > > > > > > > > > > > > Makefile
> > > > > > > > > > > > > > > > > and Install, and this will update only
> the
> > > > > condor
> > > > > > > part
> > > > > > > > > > > right?
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > All you should have to do is the
> following:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > gpt-build <package file name> <flavor>
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > For example:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > gpt-build
> > > > > > > > > > >
> globus_gram_job_manager_setup_condor-2.8.1-src.tar.gz
> > > > > > > > > > > > > > > gcc32dbg
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Note that on the download page it says
> that it
> > > > > > > requires
> > > > > > > > > one
> > > > > > > > > > of
> > > > > > > > > > > > the
> > > > > > > > > > > > > > > > packages from September 23rd
> > > > > > > > > > (globus_gram_job_manager-7.6.2).
> > > > > > > > > > > > > Make
> > > > > > > > > > > > > > > sure
> > > > > > > > > > > > > > > > to get that one too.
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Peter
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Actually I did added the two extensions
> > > > > > > > > > > > > > > > > print SCRIPT_FILE "should_transfer_files
> =
> > > > > > > > IF_NEEDED\n";
> > > > > > > > >
> > > > > > > > > > > > > > > > > print SCRIPT_FILE "WhenToTransferOutput
> =
> > > > > > > > ON_EXIT\n\n";
> > > > > > > > > in
> > > > > > > > > > > > this
> > > > > > > > > > > > > > file
> > > > > > > > > > > > > > > > >
> ./lib/perl/Globus/GRAM/JobManager/condor.pm
> > > > > > > > > > > > > > > > > in order to get the job execute in
> condor
> > > pool
> > > > > > > > > (previously
> > > > > > > > > > I
> > > > > > > > > > > > had
> > > > > > > > > > > > > > > > problem
> > > > > > > > > > > > > > > > > in executing the job).
> > > > > > > > > > > > > > > > > Please let me know.
> > > > > > > > > > > > > > > > > Thanks,
> > > > > > > > > > > > > > > > > Senthil
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > > > > > From: Peter G Lane
> [mailto:lane@xxxxxxxxxxx]
> > >
> > > > > > > > > > > > > > > > > Sent: Monday, September 26, 2005 2:46 PM
> > > > > > > > > > > > > > > > > To: Natarajan, Senthil
> > > > > > > > > > > > > > > > > Cc: discuss@xxxxxxxxxx
> > > > > > > > > > > > > > > > > Subject: Re: [Globus-discuss] Problem in
> Job
> > > > > > > > Submission
> > > > > > > > > to
> > > > > > > > > > > > > Condor
> > > > > > > > > > > > > > > > > through GT4
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > The Condor adapter doesn't automatically
> do
> > > > > this.
> > > > > > > > We've
> > > > > > > > > > > added
> > > > > > > > > > > > > > > support
> > > > > > > > > > > > > > > > > in update packages for extensions to the
> job
> > > > > > > > description
> > > > > > > > > > > that
> > > > > > > > > > > > > will
> > > > > > > > > > > > > > > > allow
> > > > > > > > > > > > > > > > > you to set these parameters. See the
> > > Bugzilla
> > > > > > entry
> > > > > > > > > about
> > > > > > > > > > > this
> > > > > > > > > > > > > > here:
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > http://bugzilla.globus.org/bugzilla/show_bug.cgi?id=3773
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Peter
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > On Mon, 2005-09-26 at 13:12 -0400,
> > > Natarajan,
> > > > > > > Senthil
> > > > > > > > > > wrote:
> > > > > > > > > > > > > > > > > > Hi,
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > I am trying to submit a XML Job
> > > description to
> > > > > > the
> > > > > > > > > > Globus,
> > > > > > > > > > > > > > Globus
> > > > > > > > > > > > > > > in
> > > > > > > > > > > > > > > > > > turn submits the job to the Condor.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > Condor executes the job but it is not
> > > copying
> > > > > > back
> > > > > > > > the
> > > > > > > > > > > > output
> > > > > > > > > > > > > > > file.
> > > > > > > > > > > > > > > > > > But if try to submit the job directly
> to
> > > > > condor
> > > > > > > > pool,
> > > > > > > > > it
> > > > > > > > > > > > > copies
> > > > > > > > > > > > > > > the
> > > > > > > > > > > > > > > > > > output file back to the specified
> > > directory.
> > > > > > Could
> > > > > > > > any
> > > > > > > > > > one
> > > > > > > > > > > > > > please
> > > > > > > > > > > > > > > > help
> > > > > > > > > > > > > > > > > > me on this how to get the output file
> back
> > > in
> > > > > > the
> > > > > > > > > > > specified
> > > > > > > > > > > > > > > > directory.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > Thanks,
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > Senthil
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > Here is the XML Job description.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > <?xml version="1.0" encoding="UTF-8"?>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > <multiJob
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > xmlns:gram="http://www.globus.org/namespaces/2004/10/gram/job";
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > >
> xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/03/addressing";>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >     <factoryEndpoint>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >         <wsa:Address>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > >
> https://gis14.exp.sis.pitt.edu:8443/wsrf/services/ManagedJobFactoryServi
> > > > > > > > > > > > > > > > > ce
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >         </wsa:Address>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >         <wsa:ReferenceProperties>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > <gram:ResourceID>Multi</gram:ResourceID>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >         </wsa:ReferenceProperties>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >     </factoryEndpoint>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > <directory>${GLOBUS_LOCATION}</directory>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >     <count>1</count>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >     <job>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >         <factoryEndpoint>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >             <wsa:Address>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > >
> > > https://hostname:8443/wsrf/services/ManagedJobFactoryService
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >             </wsa:Address>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >             <wsa:ReferenceProperties>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > <gram:ResourceID>Condor</gram:ResourceID>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >             </wsa:ReferenceProperties>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >         </factoryEndpoint>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > <executable>/home/senthil/GridTest/sh_loop</executable>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >         <argument>60</argument>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > <stdout>${GLOBUS_USER_HOME}/stdout.j3</stdout>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > <stderr>${GLOBUS_USER_HOME}/stderr.j3</stderr>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >         <count>1</count>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >     </job>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >     <job>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >         <factoryEndpoint>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >             <wsa:Address>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >                 https://
> > > > > > > > > > > > > > > > > >
> > > > > > > hostname:8443/wsrf/services/ManagedJobFactoryService
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >             </wsa:Address>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >             <wsa:ReferenceProperties>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> <gram:ResourceID>Condor</gram:ResourceID>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >             </wsa:ReferenceProperties>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >         </factoryEndpoint>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > <executable>/home/senthil/GridTest/sh_loop</executable>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >         <argument>120</argument>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > <stdout>${GLOBUS_USER_HOME}/stdout.j4</stdout>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > <stderr>${GLOBUS_USER_HOME}/stderr.j4</stderr>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >         <count>1</count>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >     </job>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > </multiJob>
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > 
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > -
> > > > > > > > > > > > > > > > > To Unsubscribe: send mail to
> > > > > majordomo@xxxxxxxxxx
> > > > > > > > > > > > > > > > > with "unsubscribe discuss" in the body
> of
> > > the
> > > > > > > message
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > >
> > 
> >

Attachment: smime.p7s
Description: S/MIME cryptographic signature