Re: [Condor-users] logEvictEvent with unknown reason (108)

["David A. Kotz" <dkotz@xxxxxxxxxxxxx>]

Thanks, Dan.

I'll try to grab the long classads for an execute node and for the job
and send it to condor-admin.  I'd have to get lucky to catch one of
these jobs if I picked a single execute node to put in debug mode.

- dave


On Wed, 2005-02-16 at 16:33 -0600, Dan Bradley wrote:
> Dave,
> 
> Yes, your basic interpretation is correct.  Also, turning on full debug 
> for the startd will increase log traffic, so if you don't think you can 
> get useful results from doing it on an individual node (in the local 
> condor config file or via condor_config_val), then perhaps we can try to 
> debug the problem by just looking at the machine and job ClassAds (using 
> condor_status -l and condor_q -l as close to the time when the problem 
> happens as possible).  If you would like to do that, I recommend sending 
> this information to condor-admin@xxxxxxxxxxxx
> 
> --Dan
> 
> David A. Kotz wrote:
> 
> >Is my basic interpretation correct?  Did the negotiator match a job to a
> >machine, which then rejected the job because it felt it was unable to
> >meet the requirements of the job?
> >
> >I'm nervous about going into full debug mode.  This will affect hundreds
> >of machines.  I just grabbed one of the matches from the log, but it's
> >happening with lots of them.  I'm worried about how much log traffic
> >will be generated if I switch all 400+ machines in this pool to full
> >debug.  They all write to a shared filesystem on a NetApp Filer.  Do you
> >think there's any real need for concern?
> >
> >- dave
> >
> >
> >On Wed, 2005-02-16 at 14:05 -0600, Dan Bradley wrote:
> >  
> >
> >>David A. Kotz wrote:
> >>
> >>    
> >>
> >>>2/16 03:42:59 vm2: Got activate_claim request from shadow
> >>>(<128.83.144.225:39738>)
> >>>2/16 03:42:59 vm2: Job Requirements check failed!
> >>>
> >>>      
> >>>
> >>There's the problem.  Now, to find out more about why the job 
> >>requirements are failing to be met, you need to turn on full debugging 
> >>in the condor config file:
> >>
> >>STARTD_DEBUG = D_COMMAND D_FULLDEBUG
> >>
> >>--Dan
> >>
> >>
> >>_______________________________________________
> >>Condor-users mailing list
> >>Condor-users@xxxxxxxxxxx
> >>https://lists.cs.wisc.edu/mailman/listinfo/condor-users
> >>    
> >>
> 
> _______________________________________________
> Condor-users mailing list
> Condor-users@xxxxxxxxxxx
> https://lists.cs.wisc.edu/mailman/listinfo/condor-users
-- 
David A. Kotz <dkotz@xxxxxxxxxxxxx>