Re: [Gems-users] prefetch question

[Jerry Lin <cosjerry@xxxxxxxxx>]

Thanks for answering.

But the prefetch count in ruby dump file is still non-zero after I comment out the lines as your reply shown.

Is there any other place to modify?

I trace the code but I can't find out where this Execute function is called.

I also try to comment out the "prefetch" function in "store_inst_t::continueExecution()" in opal/system/memop.C

And it seems still doesn't work.

I am a little confused that why prefetch request is issued when meeting store request.

 

Thanks again.

2010/6/7 Muhammad abid Mughal <mabidm_pieas@xxxxxxxxx>

hi,
     when prefetch inst gets executed the following member funtcion from memop.C file called:

    void  prefetch_inst_t::Execute( void ) {
  STAT_INC( m_pseq->m_stat_prefetches_exec[m_proc] );
//  trap_type_t t = addressGenerate( OPAL_LOAD );
//this can only be true for Non i/o and non mmu prefetches
//  if (t != Trap_NoTrap) {
    /* couldn't correctly generate address -- we're done! */
    SetStage( COMPLETE_STAGE );
    return;
//  }

  /* can't complete I/O accesses, and moreover they are uncacheable */
 //We dont need to set trap to Trap_Use_Functional bec prefetch inst dont affect program regs
/*  if ( m_physical_addr != (pa_t) -1 &&
       isIOAccess( m_physical_addr ) ) {
    SetStage( COMPLETE_STAGE );
    STAT_INC( m_pseq->m_stat_count_io_access[m_proc] ); 
    return;
  }
 /////////////// no lsq or WB concept for prefetches
  if ( isCacheable() ) {
    ASSERT( m_physical_addr != (pa_t) -1 );

    //set address to be valid
    m_addr_valid = true;

    if (!accessCache())//accessCache() always ret true
      return;
  } // is cacheable

  Complete();
*/
}

comment out as shown above.
what i am doing is just setting  stage to "COMPLETE_STAGE" and returning.

Regards,
Muhammad abid

---

From: Jerry Lin <cosjerry@xxxxxxxxx>
To: Gems Users <gems-users@xxxxxxxxxxx>
Sent: Monday, June 7, 2010 15:15:08
Subject: [Gems-users] prefetch question

Hello all,

When I running workloads with Ruby and Opal using default configuration, the prefetch count in the dump file won't be zero.

Is there any configuration to turn on/off the prefetcher?

Or is there any modification can be done to turn on/off the prefetcher?

 

Thanks for helping.

_______________________________________________
Gems-users mailing list
Gems-users@xxxxxxxxxxx
https://lists.cs.wisc.edu/mailman/listinfo/gems-users
Use Google to search the GEMS Users mailing list by adding "site:https://lists.cs.wisc.edu/archive/gems-users/" to your search.