[Gems-users] Naked checkpoint creation error

["wxq" <wxq@xxxxxxxxxxxxxxxxxx>]

Hi all,

 

I have successfully compiled Ruby and Opal on an x86_linux machine. But I meet a error on creating a naked checkpoint.

 

Followed the setup steps in “Automated Checkpoint Generation”, I changed the OS_NAME and SIMICS_OS_INSTALL_CD_1(2) variables and adjusted the related paths. However, there is some warnings and errors after I run "./naked-check-create.sh 16 65536" . 

 

The related software I use is solaris9 and simics 2.2.19.

 

The simics running information is as follows:

 

$ ./naked-check-create.sh 16 65536
number of boards is 4, number of nodes is 1

 

  +----------------+    Copyright 1998-2005 by Virtutech, All Rights Reserved
  |   Virtutech    |    Version: simics-2.2.19
  |     Simics     |    Compiled: Tue Aug 16 20:22:30 CEST 2005
  +----------------+
    www.simics.com      "Virtutech" and "Simics" are trademarks of Virtutech AB

 

Type 'copyright' for details on copyright.
Type 'license' for details on warranty, copying, etc.
Type 'readme' for further information about this version.
Type 'help help' for info on the on-line documentation.

 

Using CD-ROM image file: /home/user/workspace/scratch/checkpoint_files/sol-9-u7-sparc-v1.iso
setting media file-cd25B_2_6
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
[qlc24B_2 info] Disk registering: Loop id: 0x3
[qlc24B_2 info] Disk registering: Loop id: 0xc
[qlc24B_2 info] Disk registering: Loop id: 0xd
[qlc24B_2 info] Disk registering: Loop id: 0xe
[qlc24B_2 info] Disk registering: Loop id: 0xf
[qlc24B_2 info] Disk registering: Loop id: 0x10
[qlc24B_2 info] Disk registering: Loop id: 0x11
[qlc24B_2 info] Disk registering: Loop id: 0x12
[qlc24B_2 info] Disk registering: Loop id: 0x13
[qlc24B_2 info] Disk registering: Loop id: 0x14
[qlc28B_2 info] Disk registering: Loop id: 0x3
[qlc24B_2 info] Disk registering: Loop id: 0x4
[qlc28B_2 info] Disk registering: Loop id: 0x4
[qlc28B_2 info] Disk registering: Loop id: 0x5
[qlc28B_2 info] Disk registering: Loop id: 0x6
[qlc28B_2 info] Disk registering: Loop id: 0x7
[qlc28B_2 info] Disk registering: Loop id: 0x8
[qlc24B_2 info] Disk registering: Loop id: 0x2
[qlc28B_2 info] Disk registering: Loop id: 0x9
[qlc28B_2 info] Disk registering: Loop id: 0xa
[qlc28B_2 info] Disk registering: Loop id: 0xb
[qlc28B_2 info] Disk registering: Loop id: 0xc
[qlc28B_2 info] Disk registering: Loop id: 0xd
[qlc24B_2 info] Disk registering: Loop id: 0x5
[qlc28B_2 info] Disk registering: Loop id: 0xe
[qlc28B_2 info] Disk registering: Loop id: 0xf
[qlc28B_2 info] Disk registering: Loop id: 0x10
[qlc28B_2 info] Disk registering: Loop id: 0x11
[qlc28B_2 info] Disk registering: Loop id: 0x12
[qlc28B_2 info] Disk registering: Loop id: 0x13
[qlc28B_2 info] Disk registering: Loop id: 0x14
[qlc28B_2 info] Disk registering: Loop id: 0x15
[qlc24B_2 info] Disk registering: Loop id: 0x6
[qlc24B_2 info] Disk registering: Loop id: 0x7
[qlc24B_2 info] Disk registering: Loop id: 0x8
[qlc24B_2 info] Disk registering: Loop id: 0x9
[qlc24B_2 info] Disk registering: Loop id: 0xa
[qlc24B_2 info] Disk registering: Loop id: 0xb
New VTOC written to disk:

 

             Label : SIMDISK cyl 10938 alt 2 hd 19 sec 80
               RPM : 7200
    Data cylinders : 10938
     Alt cylinders : 2
Physical cylinders : 10940
             Heads : 19
 Sectors per Track : 80

 

  Number of data blocks : 16625760

 

Partition Table:
Number   Tag             Flag                 Start        End       Size
  2      5 (backup)      1 (unmountable)          0   16625759   16625760

 

Capturing output to 'install-log.txt'
Image memory limited to 8 G
Start at : Sat Mar 15 16:49:47 2008
[system info] Disabling slave processors.
[cd25B_2_6 info] Unimplemented SCSI Command: GET CONFIGURATION (SCSI-3) (0x46)
[system info] Enabling slave processors.
***  Simics getting shaky, switching to 'safe' mode.
Simics (main thread) received a segmentation fault. Will try to recuperate.
Starting command line. (May have skipped commands in script files.)
simics>

 

I appreciate any comments on this.

 

Many thanks!

---

Ritchie_wang

2008-03-17