[Gems-users] also a problem about create checkpoint

[llccdd1985 <llccdd1985@xxxxxxx>]

Hi,all

   I use the command ./naked-check-create.sh to create the checkpoint,also It start up correctly,the yellow console appear,But get some warnings as below:

 

 

 

 setting media file-cd25B_2_6
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
CRAFF warning: File was not closed cleanly; may be corrupted
[qlc24B_2 info] Disk registering: Loop id: 0x3
[qlc24B_2 info] Disk registering: Loop id: 0xc
[qlc24B_2 info] Disk registering: Loop id: 0xd
[qlc24B_2 info] Disk registering: Loop id: 0xe
[qlc24B_2 info] Disk registering: Loop id: 0xf
[qlc24B_2 info] Disk registering: Loop id: 0x10
[qlc24B_2 info] Disk registering: Loop id: 0x11
[qlc24B_2 info] Disk registering: Loop id: 0x12
[qlc24B_2 info] Disk registering: Loop id: 0x13
[qlc24B_2 info] Disk registering: Loop id: 0x14
[qlc28B_2 info] Disk registering: Loop id: 0x3
[qlc24B_2 info] Disk registering: Loop id: 0x4
[qlc28B_2 info] Disk registering: Loop id: 0x4
[qlc28B_2 info] Disk registering: Loop id: 0x5
[qlc28B_2 info] Disk registering: Loop id: 0x6
[qlc28B_2 info] Disk registering: Loop id: 0x7
[qlc28B_2 info] Disk registering: Loop id: 0x8
[qlc24B_2 info] Disk registering: Loop id: 0x2
[qlc28B_2 info] Disk registering: Loop id: 0x9
[qlc28B_2 info] Disk registering: Loop id: 0xa
[qlc28B_2 info] Disk registering: Loop id: 0xb
[qlc28B_2 info] Disk registering: Loop id: 0xc
[qlc28B_2 info] Disk registering: Loop id: 0xd
[qlc24B_2 info] Disk registering: Loop id: 0x5
[qlc28B_2 info] Disk registering: Loop id: 0xe
[qlc28B_2 info] Disk registering: Loop id: 0xf
[qlc28B_2 info] Disk registering: Loop id: 0x10
[qlc28B_2 info] Disk registering: Loop id: 0x11
[qlc28B_2 info] Disk registering: Loop id: 0x12
[qlc28B_2 info] Disk registering: Loop id: 0x13
[qlc28B_2 info] Disk registering: Loop id: 0x14
[qlc28B_2 info] Disk registering: Loop id: 0x15
[qlc24B_2 info] Disk registering: Loop id: 0x6
[qlc24B_2 info] Disk registering: Loop id: 0x7
[qlc24B_2 info] Disk registering: Loop id: 0x8
[qlc24B_2 info] Disk registering: Loop id: 0x9
[qlc24B_2 info] Disk registering: Loop id: 0xa
[qlc24B_2 info] Disk registering: Loop id: 0xb
New VTOC written to disk:

             Label : SIMDISK cyl 10938 alt 2 hd 19 sec 80
               RPM : 7200
    Data cylinders : 10938
     Alt cylinders : 2
Physical cylinders : 10940
             Heads : 19
 Sectors per Track : 80

  Number of data blocks : 16625760

Partition Table:
Number   Tag             Flag                 Start        End       Size
  2      5 (backup)      1 (unmountable)          0   16625759   16625760

Capturing output to 'install-log.txt'
Image memory limited to 8 G
Start at : Wed Jul  9 17:58:09 2008

 

 

but after several minutes,I got a error like this :

[system info] Disabling slave processors.
[cd25B_2_6 info] Unimplemented SCSI Command: GET CONFIGURATION (SCSI-3) (0x46)
[system info] Enabling slave processors.
***  Simics getting shaky, switching to 'safe' mode.
Simics (main thread) received a segmentation fault. Will try to recuperate.
Starting command line. (May have skipped commands in script files.)

I am afraid It's my fault,but I don't know how to fix it,any suggestion is appreciated,Thanks

 

---

22元超值饭面,8.5折纯珍比萨,必胜宅急送网上点餐优惠多