[Gems-users] troubles when i made my naked checkpoint

["wangyong" <wangyong@xxxxxxxxxxx>]

Hello,

I met some troubles when i made my naked checkpoint.

I downloaded the solaris express edition from sun website, and copy the first two iso files to the directory "$SIMICS_DIR/import/serengeti"

I modify the system.conf as follows:

 

#!/bin/bash

 

 

NAKED_CHECKPOINT_FAMILY_NAME=serengeti

 

NAKED_CHECKPOINT_DIR=/root/software/gems-2.1-simics-2.2.19/simics-2.2.19/import/serengeti/

 

NAKED_CHECKPOINT_COMMON_FILE=naked-common.simics

 

NAKED_CHECKPOINT_RUN_FILE=naked-run.simics

 

TARGET_CPU_FREQ_MHZ=75

 

TARGET_MAIN_DISK_SIZE_BYTES=8513945600
TARGET_MAIN_DISK_CYLINDERS=10940
TARGET_MAIN_DISK_HEADS=19
TARGET_MAIN_DISK_TRACKS=80

 

TARGET_ETHERNET_ADDRESS=10:10:10:10:10:24

 

TARGET_NI_IP_ADDRESS=192.168.0.11

 

TARGET_NETMASK=255.255.255.0

 

TARGET_HOSTNAME=insomnia

 

TARGET_ROUTER_IP_ADDRESS=192.168.0.1

 

OS_NAME=SolarisExpress

 

OS_INSTALL_CD_1=/root/software/gems-2.1-simics-2.2.19/simics-2.2.19/import/serengeti/sol-nv-b79b-sparc-v1.iso
OS_INSTALL_CD_2=/root/software/gems-2.1-simics-2.2.19/simics-2.2.19/import/serengeti/sol-nv-b79b-sparc-v2.iso

OS_AUTO_PROMPT=true

 

OS_LANGUAGE=1

 

SIMICS_VERSION=2.2.19

 

SIMICS_DIR=/root/software/gems-2.1-simics-2.2.19/simics-2.2.19

 

SIMICS_MEMORY_LAYOUT=Greedy

 

SIMICS_HOST_MACHINE_TYPE=x86-linux

 

 

 

But when i began to run it, some problem happenned:

when

Attempting to configure interface hme0... 

it said that

[hme0 info] Dropping packet, not connected to network. (Will not warn again)
***  Simics getting shaky, switching to 'safe' mode.
Simics (main thread) received a segmentation fault. Will try to recuperate.
Starting command line. (May have skipped commands in script files.)
simics>

and break!

 

this is the content in xterm:

pci bootbus-controller pci
Probing /ssm@0,0/pci@18,700000 Device 1  pci108e,1000 SUNW,hme
Probing /ssm@0,0/pci@18,700000 Device 2  SUNW,qlc fp disk
Probing /ssm@0,0/pci@18,700000 Device 3  Nothing there
Probing /ssm@0,0/pci@18,600000 Device 1  Nothing there
pci pci
Probing /ssm@0,0/pci@19,700000 Device 1  Nothing there
Probing /ssm@0,0/pci@19,700000 Device 2  scsi disk tape
Probing /ssm@0,0/pci@19,700000 Device 3  Nothing there
Probing /ssm@0,0/pci@19,600000 Device 1  Nothing there
pci bootbus-controller pci
Probing /ssm@0,0/pci@1c,700000 Device 1  Nothing there
Probing /ssm@0,0/pci@1c,700000 Device 2  SUNW,qlc fp disk
Probing /ssm@0,0/pci@1c,700000 Device 3  Nothing there
Probing /ssm@0,0/pci@1c,600000 Device 1  Nothing there
pci pci
Probing /ssm@0,0/pci@1d,700000 Device 1  Nothing there
Probing /ssm@0,0/pci@1d,700000 Device 2  Nothing there
Probing /ssm@0,0/pci@1d,700000 Device 3  Nothing there
Probing /ssm@0,0/pci@1d,600000 Device 1  Nothing there
Simics Serengeti System
Copyright 2001-2004 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
SmartFirmware, Copyright (C) 1996-2001.  All rights reserved.

 

Boot path: /ssm@0,0/pci@19,700000/scsi@2/disk@6,0:f  Boot args: -v
Loading ufs-file-system package 1.4 04 Aug 1995 13:02:54.
FCode UFS Reader 1.13 05/06/08 08:30:31.
Redirected to slice: 1
Loading: /platform/SUNW,Sun-Fire/ufsboot
Loading: /platform/sun4u/ufsboot
Size: 0xa1d27+0x3c410+0x945cc Bytes
module /platform/SUNW,Sun-Fire/kernel/sparcv9/unix: text at [0x1000000, 0x10a1d2
7] data at 0x1800000
module misc/sparcv9/krtld: text at [0x10a1d28, 0x10bcbff] data at 0x18d09e0
module /platform/sun4u/kernel/sparcv9/genunix: text at [0x10bcc00, 0x12a66cf] da
ta at 0x18d6800
module /platform/SUNW,Sun-Fire/kernel/misc/sparcv9/platmod: text at [0x12a66d0,
0x12aad2f] data at 0x192afe8
module /platform/SUNW,Sun-Fire/kernel/cpu/sparcv9/SUNW,UltraSPARC-III+: text at
[0x12aad80, 0x12c0197] data at 0x192b940
SunOS Release 5.11 Version snv_79a 64-bit
Copyright 1983-2007 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
os-io Ethernet address = 10:10:10:10:10:24
Using default device instance data
mem = 16777216K (0x400000000)
avail mem = 16769744896
root nexus = Sun Fire 6800
pseudo0 at root
pseudo0 is /pseudo
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
ssm0 at root: SSM Node 0
ssm0 is /ssm@0,0
pci108e,80012 at ssm0: Node 0 Safari id 25 0xcf00000
pcisch2 is /ssm@0,0/pci@19,700000
/ssm@0,0/pci@19,700000/scsi@2 (glm0):
        Rev. 4 Symbios 53c876 found.
PCI-device: scsi@2, glm0
glm0 is /ssm@0,0/pci@19,700000/scsi@2
sd6 at glm0: target 6 lun 0
sd6 is /ssm@0,0/pci@19,700000/scsi@2/sd@6,0
root on /ssm@0,0/pci@19,700000/scsi@2/disk@6,0:b fstype ufs
memory-controller0 at ssm0: Node 0 Safari id 0 0x400000 ...
mc-us30 is /ssm@0,0/memory-controller@0,400000
ssm1 at root: SSM Node 1
ssm1 is /ssm@1,0
memory-controller1 at ssm1: Node 1 Safari id 4 0x12400000 ...
mc-us31 is /ssm@1,0/memory-controller@24,400000
pci108e,80010 at ssm0: Node 0 Safari id 24 0xc700000
pcisch0 is /ssm@0,0/pci@18,700000
PCI-device: bootbus-controller@4, sgsbbc0
sgsbbc0 is /ssm@0,0/pci@18,700000/bootbus-controller@4
pci108e,80014 at ssm0: Node 0 Safari id 28 0xe700000
pcisch4 is /ssm@0,0/pci@1c,700000
PCI-device: bootbus-controller@4, sgsbbc1
sgsbbc1 is /ssm@0,0/pci@1c,700000/bootbus-controller@4
Hardware watchdog enabled
pci108e,80011 at ssm0: Node 0 Safari id 24 0xc600000
pcisch1 is /ssm@0,0/pci@18,600000
pci108e,80013 at ssm0: Node 0 Safari id 25 0xce00000
pcisch3 is /ssm@0,0/pci@19,600000
pci108e,80015 at ssm0: Node 0 Safari id 28 0xe600000
pcisch5 is /ssm@0,0/pci@1c,600000
pci108e,80016 at ssm0: Node 0 Safari id 29 0xef00000
pcisch6 is /ssm@0,0/pci@1d,700000
pci108e,80017 at ssm0: Node 0 Safari id 29 0xee00000
pcisch7 is /ssm@0,0/pci@1d,600000
pseudo-device: dld0
dld0 is /pseudo/dld@0
cpu0: UltraSPARC-III+ (portid 0 impl 0x15 ver 0x55 clock 75 MHz)
cpu36: UltraSPARC-III+ (portid 36 impl 0x15 ver 0x55 clock 75 MHz)
PCI-device: SUNW,qlc@2, qlc0
qlc0 is /ssm@0,0/pci@18,700000/SUNW,qlc@2
PCI-device: SUNW,qlc@2, qlc1
qlc1 is /ssm@0,0/pci@1c,700000/SUNW,qlc@2
Configuring /dev
pseudo-device: devinfo0
devinfo0 is /pseudo/devinfo@0
iscsi0 at root
iscsi0 is /iscsi
pseudo-device: pseudo1
pseudo1 is /pseudo/zconsnex@1
sd1 at glm0: target 0 lun 0
sd1 is /ssm@0,0/pci@19,700000/scsi@2/sd@0,0
hme0 : PCI IO 2.0 (Rev Id = c1) Found
hme0 : Local Ethernet address = 10:10:10:10:10:24
PCI-device: SUNW,hme@1,1, hme0
hme0 is /ssm@0,0/pci@18,700000/SUNW,hme@1,1
fp0 is /ssm@0,0/pci@18,700000/SUNW,qlc@2/fp@0,0
pseudo-device: fssnap0
fssnap0 is /pseudo/fssnap@0
pseudo-device: ramdisk1024
ramdisk1024 is /pseudo/ramdisk@1024
pseudo-device: winlock0
winlock0 is /pseudo/winlock@0
pseudo-device: fcp0
fcp0 is /pseudo/fcp@0
pseudo-device: fcsm0
fcsm0 is /pseudo/fcsm@0
pseudo-device: llc10
llc10 is /pseudo/llc1@0
pseudo-device: lofi0
lofi0 is /pseudo/lofi@0
pseudo-device: fcode0
fcode0 is /pseudo/fcode@0
fp2 is /ssm@0,0/pci@1c,700000/SUNW,qlc@2/fp@0,0
pseudo-device: trapstat0
trapstat0 is /pseudo/trapstat@0
pseudo-device: pool0
pool0 is /pseudo/pool@0
pseudo-device: zfs0
zfs0 is /pseudo/zfs@0
Using RPC Bootparams for network configuration information.
Attempting to configure interface hme0...

 

and this is the command lines:

 

[root@insomnia checkpoints]# ./naked-check-create.sh 32 256
number of boards is 8, number of nodes is 2
Checking out a license... done: commercial license.
                           
  +----------------+    Copyright 1998-2005 by Virtutech, All Rights Reserved
  |   Virtutech    |    Version: simics-2.2.19
  |     Simics     |    Compiled: Tue Aug 16 20:22:30 CEST 2005
  +----------------+
    www.simics.com      "Virtutech" and "Simics" are trademarks of Virtutech AB

 

Type 'copyright' for details on copyright.
Type 'license' for details on warranty, copying, etc.
Type 'readme' for further information about this version.
Type 'help help' for info on the on-line documentation.

 

Using CD-ROM image file: /root/software/gems-2.1-simics-2.2.19/simics-2.2.19/import/serengeti/sol-nv-b79b-sparc-v1.iso
setting media file-cd25B_2_6
CRAFF warning: File was not closed cleanly; may be corrupted

.......

CRAFF warning: File was not closed cleanly; may be corrupted

.......

New VTOC written to disk:

 

             Label : SIMDISK cyl 10938 alt 2 hd 19 sec 80
               RPM : 7200
    Data cylinders : 10938
     Alt cylinders : 2
Physical cylinders : 10940
             Heads : 19
 Sectors per Track : 80

 

  Number of data blocks : 16625760

 

Partition Table:
Number   Tag             Flag                 Start        End       Size
  2      5 (backup)      1 (unmountable)          0   16625759   16625760

 

Capturing output to 'install-log.txt'
Image memory limited to 8 G
Start at : Thu Mar 27 10:01:25 2008
[system info] Disabling slave processors.
[system info] Enabling slave processors.
[Turbo] Trampoline found at block start.
[qlc28B_2 info] Undocumented MAILBOX command: 0x5a
[qlc24B_2 info] Undocumented MAILBOX command: 0x5a
[qlc24B_2 info] Note: Abort Command Received - Something probably went wrong

 

.......

[qlc28B_2 info] Note: Abort Command Received - Something probably went wrong
[hme0 info] Dropping packet, not connected to network. (Will not warn again)
***  Simics getting shaky, switching to 'safe' mode.
Simics (main thread) received a segmentation fault. Will try to recuperate.
Starting command line. (May have skipped commands in script files.)
simics>

 

Would you like to give some advice to solve the problem? Thank you!

 

 

 

 

2008-04-07

---

wangyong